Pedal Parts / DIY

P-LPW-FLATBK-X LED with Bezel - Low Profile, Prewired, Diffused LED, black metal
Colors Available:
New!:
Prewired low-profile LED bezel with a diffused LED. With a 0.07” height, this black metal LED bezel has an almost flush appearance on the panel it’s mounted to. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12VDC. Mounting nut and rubber o-ring included.
Starting at $1.45
P-LPW-CONE-X LED with Bezel - Cone Shape, Prewired
Colors Available:
New!:
Prewired cone-shaped LED bezel. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12VDC. Mounting nut and lock washer included.
Starting at $1.10
P-LPW-FLAT-X LED with Bezel - Low Profile, Prewired, Diffused LED, Steel
Colors Available:
New!:
Prewired steel low-profile LED bezel with a diffused LED. With a 0.061” height, this steel LED bezel has an almost flush appearance on the panel it’s mounted to. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12VDC. Mounting nut and rubber o-ring included.
Starting at $1.45
P-LTX387 Bulb - Morley, Effects Pedals Replacement
AML387 incandescent light bulb, T-1 3/4 midget flanged, miniature lamp. Great replacement for Morley.
$0.95
P-L300X LED - 3mm diameter, diffused lens, 3.6 mCd
Package of 5
Colors Available:
Lens Diameter: 3 mm Overall Height: 5.4 mm Lens Type: Diffused Multiple color options available.
$0.94
P-L600-X LED - 3mm, Water Clear, High Brightness, Package of 5
Package of 5
Colors Available:
High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.
  • 3mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5
Starting at $1.35
P-H590-X Footswitch - 3PDT, with built-in LED Ring
Colors Available:
3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
$8.25
P-L35X LED - 5mm diameter, diffused lens, 5 mCd
Package of 5
Colors Available:
5mm (T-1 ¾) diffused LED’s. Great for use in pedal builds and other applications where a tinted and diffused indicator is needed. Multiple colors available.
  • 5mm size
  • Tinted and diffused
  • Multiple colors available
  • Package of 5
$0.75
P-LPW-CUP-R LED Bezel - Cup Shape, Prewired, Red LED
Prewired cup-shaped LED bezel with a red LED. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12V. Mounting nut and lock washer included.
$1.15
P-L200 LED Bezel - for 3mm LED, used for mounting
Holder for mounting LEDs to panels.
$1.00
P-L400 LED Bezel - with included 3mm Red LED
Bezel Assembly with 3mm Red LED. Required hole size: 0.25". Washer and hex nut included. LED Specifications: Color Red Lens Diam 3 mm Overall Height 5.4 mm Lens Type Diffused Luminous Intensity Min. 3.6 mCd @If (test) 10 mA Wavelngth (Peak) 568 nm V(FM) Max.(V) Forward Voltage 2.7 V @I(F) (test) 10 mA Min Operating Temp -30° Max Operating Temp 80°
$1.00
P-L700-X LED - 5mm, Water Clear, High Brightness, Package of 5
Package of 5
Colors Available:
High brightness 5mm LED. Great for use in pedal and amp builds as well as other applications where a bold, bright, indicator is needed. Multiple colors available.
  • 5mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5
Starting at $1.35
P-LRING-X LED - Footswitch Ring, With Bezel, 9V
Colors Available:
Leaded LED rings for use with standard footswitches. These LED rings use an array of LEDs with internal current limiting so no additional parts are required for use with 9VDC. Red, green, blue, and two-color combinations are available. A 15mm panel hole is required. See full dimensions below to check footswitch compatibility.
$2.64
P-L710-X LED Lens - Fresnel, Polycarbonate, 5mm
Colors Available:
Panel mount led lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • ¼” mounting hole
  • For panel thicknesses of 1/16” to ⅛”
  • Fresnel lens
  • Low Profile
Starting at $0.59
Don't see what you're looking for? Send us your product suggestions!