Pedal Parts / DIY

Slotted dress nut for ⅜”-32 threaded bushing such as standard Switchcraft ¼” jacks and CTS potentiometers. These plated brass nuts add a sleek look to any amplifier, pedal or guitar. This style of nut has a similar look to slotted round nuts found on plexi Marshall amps.

Peavey TRS jack with a switched tip connection. Stereo HID (High Definition), insulated, plastic bushing.

Pure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

Switchcraft shouldered hex nuts for ⅜”-32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. The large nut (W-SC-DRESS-1) is intended for panel or chassis thicknesses of 0.05” through 0.09”. The small nut (W-SC-DRESS-2) is intended for panel or chassis thicknesses of 0.095” through 0.125”. Rubber grommet included.

R/A stereo jack. Replacement for Fender amps 1999-present. Similar to Fender part: 005-3450-000

Stereo, insulated, plastic bushing, bushing length = 0.29". Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.

1/4" enclosed jack, switched, with chrome ferrule and straight PCB pins, mounting nut included. Wide body and extremely durable contacts.

The Switchcraft Type 112BX enclosed ¼” jack is a high quality jack. This jack has three solder lugs. One for the tip, one for the ring, and one for the sleeve. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer.

• Type 112BX
• 0.276" bushing length (standard)
• Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
• Stereo 3-Conductor
• Includes nut and washer

See W-SC-111X for mono version

Solder terminals, switched. Used in modern Marshall amps. Features: Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability, tough, molded grade 1 black Nylon body.

12 ½" mm, stereo, insulated, PC mount, bushing length = 0.29".

3 pole open 1/4" jack, 3 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs

PCB Mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.

• M9*0.75 Bushing Thread
• Stereo 3-Conductor (TRS)
• Open Circuit (does not have switched terminal).
• Includes nut and washer.

Solder terminals, switched. Metal ferrule, vintage style.
Features:

• Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
• Tough, molded grade 1 black Nylon body.
• Made in the U.K.
• Supplied with a metal hexagonal mounting nut
• Designed to receive both mono and stereo 1/4" jack plugs

Withstand Voltage: 2000VDC Min. Maximum Current: 5A Temperature Rating: -10°C ~ +70°C Life (Minimum): 10,000+ Operations Nominal Contact Resistance: < 50 mΩ

Mono input. Solder lugs, shorting. Metal ferrule, vintage style. Similar to S-H901-X.

Horizontal 1/4" jack, all contacts switched, plastic housing with nut and washer, solder tap version

Stereo jack for Dunlop effects pedals. Original Dunlop replacement part. Though hole PCB mount with six pins.

Mono input jack. 4 solder terminals, switched. Used in modern Marshall amps.

Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.

Horizontal 1/4" jack, all contacts switched, chrome ferrule nut

Fender® Style ¼" Mono Input Jack with 4 PCB Terminals.

Cliff UK 1/4" white jack. External threading: 7/16-20. Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability. Tough, molded Nylon body.

Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer

• Withstand voltage: 2000V DC Minimum
• Maximum current: 5A
• Temperature rating: -10°C - 70°C
• Life (minimum): 10,000+ operations
• Nominal contact resistance:

Fender® Style replacement ¼" stereo input jack that has 9 PCB mount terminals.