PCB for a Fuzz Face style circuit with PCB mounted potentiometers. Its very low component count makes it a great beginner project. Builders can use preselected transistors from P-Q2N1309-SET-FF with its included resistors for R1 through R4 for a simple and great sounding germanium fuzz. If a builder wants to use their own transistors, the stock component values are also clearly labeled on the PCB. The transistor footprints fit P-SGP-001 sockets making swapping transistors a simple process so builders can experiment with a variety of types and values.

This board was designed for a 1590N1/125B or C65-sized enclosure, with the potentiometers spaced 30mm apart. It can also be mounted using the two screw-mount holes with the potentiometers wired off-board. There are two screw-mounting holes which are designed for M3 screws. They work well with our S-H190 and S-H192-X adhesive mounts.

• Recommended Fuzz Pot: R-VAM1KL-SS-PCL or R-VAM1KC-SS-PCL
• Recommended Volume Pot: R-VAM500KA-SS-PCL
• Potentiometer Covers: R-VCOVER-LP16

Note: 2.2uF and 22uF capacitors can be used in place of the stock 2.5uF and 20uF capacitors.