Overstock Sale

P-GT-GP200 Parts Kit - Grover, Bushings, Washers, Screws
Bushings, washers and screws for Grover® Machine Heads.
$149.95
Save 14%
Originally: $175.00
P-GTB830 Bridge - Tele, Adjustable Locking Saddles, Chrome
Replacement chrome bridge for Tele. Made in Korea.
$39.95
P-GHP-7X Intonation System - Hollow Point, 7 String
Colors Available:
Hollow Point® Intonation System for Double Locking Tremolos. For 7 string guitar. The Hollow Point® Intonation System is designed for use with most Floyd Rose® style/licensed and Ibanez® Edge double locking tremolos where the fine tuner makes direct contact with the string lock screw. Designed in the USA and made in Korea. Multiple color options available.
Starting at $27.98
R-VB-A-XL Potentiometer - Bourns, Audio, Knurled Shaft, ¾" Bushing
Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs
  • 0.625" W x 0.625" L x 0.5" D
  • 300° rotation
  • Power Rating: ¼ watt
  • ¼" Knurled 18-Spline Split Shaft
  • ¾" Bushing Length
  • Tolerance: ±20 %
  • Very Low Noise
Starting at $15.95
Save 9%
Originally: $17.50
P-GPS-5N Pickup Parts Set - J-Bass, Neck, Black Cover
Includes all parts but the magnet wire, all sets are ready for winding. Kit includes Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.
$15.95
Save 6%
Originally: $16.95
P-GPS-5B Pickup Kit - J-Bass, Bridge, Black Cover
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.
JBA is the most represented in J-Bass style pickup line of WSC. Overwound for more punch, midrange, bass, and output, and delivers '60s Jazz Bass tone. It is constructed with Alnico 5 magnets and Formvar magnet wire for serious thump and growl.
$14.95
Save 12%
Originally: $16.95
P-GPS-6 Pickup Kit - P-Bass, Black Cover
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. PBA pickup uses Alnico 5 rod magnets and a knifeedge gloss-cover hot coil wind that delivers a forceful sound with pushed midrange but tight bass and treble response. This pickup provides the humbucking punch and boom associated with the electric bass.
$14.95
Save 12%
Originally: $16.95
P-GTB810-A Bridge - Les Paul, Vintage ABR, Chrome
Vintage style ABR bridge. Wired. Hardware included The saddles on this ABR bridge are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just as the vintage originals were designed.
  • Thumbwheels and threaded rod included
  • Made In Korea
$10.95
Save 27%
Originally: $14.95
P-GP-COV-3BR Pickup Cover - Nickel, Brass
Nickel pickup cover for building or repairing Filtertron style humbucking pickups.
  • Nickel plated brass
  • Overall measurements: 71.9mm/2.83” Length x 35.3mm/1.38” Width x 16.2mm/.63” Height
  • 63.6mm/2.50” center to center mounting screw holes
  • Sold individually
$9.95
Save 23%
Originally: $12.95
R-VB-XL-P Pot - Bourns, Linear, Knurled Shaft
Potentiometer - Bourns, Linear Taper, Knurled Split Shaft, Premium
$8.95
Save 10%
Originally: $9.95
R-VB-XL Potentiometer - Bourns, Linear, Knurled, Conductive Polymer
Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.
Starting at $8.56
P-H1590BBCE-X Chassis Box - Diecast Aluminum, Colored
Colors Available:
Cool chassis box perfectly suited for effects pedals and other DIY projects.
  • 4.67" x 3.68" x 1.18"
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Painted
Starting at $7.95
Save 14%
Originally: $9.25
R-VWAH-POT-X Potentiometer - Wah Pot
Standard vintage style wah pots with solder lugs and gear included. Part # R-VWAH-POT (100K) has an audio taper. All others are linear.
Starting at $7.95
Save 11%
Originally: $8.95
W-AM-TM1PBJ Plug - Amphenol, ¼", Mono, T-Series, Plastic, Jumbo
The Amphenol T series SwitchPlug uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals. The sliding ring contact self-cleans every time the plug is connected preventing excessive build up of oxidization and contamination. Activation is directly off the jacks full front face assuring a positive reference point every time, and as it works instantaneously on the main circuits there is no need for the use of magnets or other elaborate switching mechanisms. Thermoplastic Backshell. Straight, black finish. Large cable clamp.
$7.95
Save 11%
Originally: $8.95
P-GP-COV-1C Pickup Cover - 50mm, Chrome
Chrome pickup cover used when winding your own humbucker sized pickups or for covering previously uncovered pickups to give them that sleek chrome look. These covers are plated and polished to a beautiful shine and feature a vintage style spacing.
  • 50mm/1.95” vintage style spacing(outer holes center to center)
  • Chrome plated
  • Overall measurements: 70mm/2.76” Length x 39.7mm/1.56” Width x 16.8mm/.66” Height
  • Sold individually
$7.95
Save 11%
Originally: $8.95
P-H521 Switch - Carling, Toggle, DPDT, 3 Position, On-Off-On, Terminals
Carling, 3 position DPDT toggle switch (on-off-on) with screw terminals.
$6.95
Save 9%
Originally: $7.65
P-H396 Switch - Carling, Rotary, Off-On, Solder Lug
  • Position 1: Off
  • Position 2: On
  • Position 3: -
  • Position 4: -
  • Number of Poles: 1 pole
  • Ratings: 2A 250VAC, 4A 125VAC, 1A 125V
  • Dielectric Strength: 1,000 V RMS (minimum)
  • Insulation Resistance: 100 megohms (minimum)
  • Base Material: Steel/Zinc Plate
  • Actuator Style: Nylon Knob
  • Actuator Material: Nylon
  • Bushing Material: Brass/Nickel Plate
  • Terminal Options: Solder Lugs, .250 QC Tabs
  • Mounting Method: Bushing Mount
  • Mounting Hole Dimensions: .468" diameter; 11.88mm diameter

Note: Off-On switches may sometimes be referred to as Off-None-On.
$6.95
Save 13%
Originally: $7.95
P-H532 Switch - Carling, Toggle, SPST, On-(Off), Solder Lugs
Carling, SPST toggle, momentary on-(off), normally closed. Solder lugs. 3A 250V, 6A 125V. Made in Mexico.
Note: On-(Off) switches may sometimes be referred to as On-None-(Off).
$5.95
Save 10%
Originally: $6.60
S-W130 Cord - Power, UK, 2.5M
Detachable 3 conductor power cord for United Kingdom wall outlets. Cord end is IEC connected. GTSA-3 (Marshall™ type) 18 AWG. 2-1/2 meters (about 8 feet) length, 1/4” outer diameter.
$4.95
P-H551 Switch - Carling, Footswitch, SPST, Off-(On), Screw Terminals
Carling, SPST footswitch, Off-(On), momentary, normally open with screw terminals.
Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$4.06
Save 42%
Originally: $6.95
P-0501H01 Terminal Strip - 5 Lug, 1st Lug Common, Horizontal, package of 5
(Package of 5)
Standard size terminal strips, 1/16 thick bakelitetin plated steel solder lugs and brackets on 3/8" centers. Package of five. 5 lug1 groundfirst lug common
$3.50
Save 26%
Originally: $4.75
P-GWRENCH-3 Allen wrenches - set of three sizes
Allen wrench set of three: 2.5mm, 3mm, 4mm
$3.00
Save 43%
Originally: $5.25
S-H104 Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
(Package of 25)
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$3.00
Save 25%
Originally: $4.00
P-SP4-477C Tube Base - 4-Pin, Ceramic
4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.
$2.83
Don't see what you're looking for? Send us your product suggestions!