Op-Amp - LM324, Quad, Low-Power, 14-Pin DIP
Quad low-power opamps in an 14-pin DIP package. The LM324 offers a 1MHz bandwidth and can be powered from a single supply.
The LM324 consists of four independent, high-gain, internally frequency compensated operational amplifiers designed to operate from a single power supply over a wide range of voltages. Operation from split-power supplies is also possible and the low-power supply current drain is independent of the magnitude of the power supply voltage.
SKU:
P-QLM324
Item ID:
042781
UPC/EAN:
841358112515
Package:
Sections:
Type:
Amplifier-to-Amplifier Coupling | -120dB | ||
IOS Drift | 10pA/°C | ||
Junction-to-Ambient Thermal Resistance | 88°C/W | ||
Max. Supply Current | 3mA | ||
Max Differential Input Voltage | 32V | ||
Max Input Bias Current (IIN(+) or IIN(−)) | 500nA | ||
Max Input Bias Current (IIN(+) or IIN(−), VCM = 0V, TA = 25°C) | 250nA | ||
Max Input Common-Mode Voltage Range (V+ = 30V) | V+ - 2V | ||
Max Input Common-Mode Voltage Range (V+ = 30V, TA = 25°C) | V+ - 1.5V | ||
Max Input Current (VIN < -0.3V) | 50mA | ||
Max Input Offset Current (IIN(+) or IIN(−), VCM = 0V) | 150nA | ||
Max Input Offset Current (IIN(+) or IIN(−), VCM = 0V, TA = 25°C) | 50nA | ||
Max Input Offset Voltage (TA = 25°C) | 7mV | ||
Max Input Offset Voltage (VO ≃ 1.4V, RS = 0Ω with V+ from 5V to 30V; and over the full input common-mode range (0V to V+ − 1.5V)) | 9mV | ||
Max Input Voltage | 32V | ||
Max Lead Temperature (Soldering, 10 Seconds) | 260°C | ||
Max Operating Input Voltage on Input pins | V+ | ||
Max Output Short-Circuit to GND (One Amplifier) | Continuous | ||
Max Power Dissipation | 1130mW | ||
Max Short Circuit to Ground | 60mA | ||
Max Soldering (10 Seconds) | 260°C | ||
Max Supply Voltage (V+ - V-) | 32V | ||
Min Common-Mode Rejection Ratio | 65dB | ||
Min Input Common-Mode Voltage Range (V+ = 30V) | 0V | ||
Min Input Common-Mode Voltage Range (V+ = 30V, TA = 25°C) | 0V | ||
Min Input Voltage | -.3V | ||
Min Large Signal Voltage Gain (V+ = 15V (VOSwing = 1V to 11V), RL ≥ 2kΩ) | 15V/mV | ||
Min Large Signal Voltage Gain (V+ = 15V, RL ≥ 2kΩ, (VO = 1V to 11V), TA = 25°C) | 25V/mV | ||
Min Operating Input Voltage on Input pins | 0V | ||
Min Power Supply Rejection Ratio | 65dB | ||
Min Sink Output Current | 5mA | ||
Min Sink Output Current (TA = 25°C) | 20mA | ||
Min Source Output Current | 10mA | ||
Min Source Output Current (TA = 25°C) | 20mA | ||
Min Supply Voltage (V+ - V-) | 3V | ||
Operating Junction Temperature | -0°C to 70°C | ||
Storage Temperature Range | -65°C to +150°C | ||
Typical Common-Mode Rejection Ratio | 85dB | ||
Typical Input Bias Current (IIN(+) or IIN(−)) | 40nA | ||
Typical Input Bias Current (IIN(+) or IIN(−) , VCM = 0V, TA = 25°C) | 45nA | ||
Typical Input Offset Current (IIN(+) or IIN(−), VCM = 0V, TA = 25°C) | 5nA | ||
Typical Input Offset Voltage (TA = 25°C) | 2mV | ||
Typical Large Signal Voltage Gain | 100V/mV | ||
Typical Power Supply Rejection Ratio | 100dB | ||
Typical Short Circuit to Ground | 40mA | ||
Typical Sink Output Current | 8mA | ||
Typical Sink Output Current (TA = 25°C) | 10mA | ||
Typical Source Output Current | 20mA | ||
Typical Source Output Current (TA = 25°C) | 40mA | ||
Typical Supply Current | 1.5mA | ||
VOS Drift | 7µV/°C |
Packaging Dimensions | 0.758 in. × 0.325 in. × 0.285 in. | ||
Weight (Packaging) | 0.0035 lbs. |
![]() | All Models |
My Project Lists
Specifications, Files, and Documents
Questions? Contact us at [email protected], or give us a call at 480-296-0890
Customers who purchased this item also bought
Resistors - 1/4 Watt, Metal Film, 1% tolerance Capacitor - Kemet, R82 Series, Polyester, 5mm Spacing Resistors - 1/8 Watt, Metal Film, 1% tolerance Trimmer - Bourns, 3362P, Single Turn, Top Adjust, PCB Mount IC Socket - Dual in-line package, 2.54mm Pitch, 7.62mm Spacing CMOS - CD4013, Dual D-Type Flip-Flop, 14-Pin DIP
Product Reviews