Nut - Graphite, for Gibson, slotted

Nut - Graphite, for Gibson, slotted image 1
Click to zoom in
Customer Images:
No Images yet! Submit a product image below!

Nut - Graphite, for Gibson, slotted

In Stock

This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size.

PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

  • Length = 1 ~\frac{23}{32}~ inches (43.75mm)
  • Height #1 (fretboard side) = ~\frac{5}{16}~ inches (7.81mm)
  • Height #2 (headstock side) = ~\frac{9}{32}~ inches (7mm)
  • Thickness at bottom = ~\frac{15}{64}~ inches (6.1mm)
  • Thickness at top = ~\frac{3}{16}~ inches (4.78mm)
Item ID:
Replacement Type:
RoHS Compliant
Product Measurements by Type
Item Height, fretboard side7.81 mm
Item Height, headstock side7 mm
Item Length43.75 mm
Item Width, bottom6.1 mm
Item Width, top4.78 mm
Packaging Information
Packaging Dimensions3 in. × 1.3 in. × 0.3 in.
Weight (Packaging)0.01 lbs.

My Project Lists

You must be logged in to add items to a project list.

Questions and Answers

No questions have been asked about this product.

Product Reviews

2.00 out of 5 based on 2 reviews
Jesse Heesh - July 15th, 2020
3 out of 5

I don’t think this is a actual graphite nut and it it is it is extremely cheaply made however everything else I have ever ordered has been top quality.

Anonymous - December 24th, 2016
1 out of 5

Do not waste your money. I ordered 3 (1 for immediate use, 2 for shop stock) and no amount of sanding and/or filing will ever make any of them usable. Just one example of the crappiness: the amount of material that has to be removed in order to square the nut up against the fret board is about 2 mm, approx 25% of the nut. Garbage.