Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
Nut - Fender®, Pre-slotted, Bone, for Tele and Strat
Original Fender pre-slotted bone nut for Teles and Strats.
| No measurements are currently available for this product. Please contact us if you have any questions. |
| Packaging Dimensions | 2.45 in. × 2.77 in. × 0.35 in. | |
| Weight (Packaging) | 0.018 lbs. |
My Project Lists
Questions and Answers
Click each question to see its answers.
4 answers
Is this bone-nut a 100 percent-genuine bone-nut material?
Asked by Anonymous on April 26th, 2017. 1 person subscribed to this question
As far as we know this is a 100% bone nut.
After doing research couldn't find whether this original-fender BONE-NUT is all genuine-Bone but after close examination of it in enlarging it on a downloaded-picture,seems to be all-BONE!
After a magnified look on a down load image,I believe it to be bone-material,now a purchase
After close examination of magnified-download,this nut to be genuine-BONE:YES!
2 answers
Will ten-gauge strings fit in this nut?
Asked by Anonymous on April 22nd, 2017. 1 person subscribed to this question
Even though these are pre-slotted, you might have to make some minor adjustments to accommodate ten-gauge strings.
Yes,I believe I'm one step closer in choosing this one!
1 answers
HI ! I have an american stratocaster 2012,the specs say it has a 9.5 radius neck....will this one fit on my guitar?,thank you for your time
Asked by Anonymous on August 29th, 2016. 1 person subscribed to this question
Yes, this nut has a 9.5 radius. You may need to do some light sanding to get an exact fit. Nevertheless, it is designed for your guitar.
1 answers
Will this nut fit a made in mexico strat?
Asked by Anonymous on April 9th, 2017. 1 person subscribed to this question
If your guitar has a 1 11/16" nut width with a 9.5" radius, this should fit.
1 answers
Do you have a nut for a Jazzmaster 7 1/4 in radius?
Asked by Anonymous on April 16th, 2017. 1 person subscribed to this question
Unfortunately all of our Fender style nuts have 9.5" radius.
1 answers
Will this fit an affinity ic squier?
Asked by Anonymous on April 25th, 2017. 1 person subscribed to this question
If your guitar has a 1 11/16" nut width with a 9.5" radius, this should fit.
1 answers
Is it flat bottom? What is the width? Are the slots just started or pretty much comolete. What is the thickness?
Asked by Anonymous on September 8th, 2017. 1 person subscribed to this question
The bottom is not flat and here are the dimensions: length 1.65"(41.91mm), width: .12"(3.048mm), and height .17"(4.318mm). You may need to do some final setup work for the nut slots.
1 answers
Will this size fit a Fender Squire Telecaster (Made in Japan) Serial # A044052?
Asked by Anonymous on September 9th, 2017. 1 person subscribed to this question
We are not sure if this will fit your guitar. Here are the dimensions: length 1.65"(41.91mm), width: .12"(3.048mm), and height .17"(4.318mm).
1 answers
What is the radius of this nut?
Asked by Anonymous on February 2nd, 2018. 1 person subscribed to this question
This nut has a 9.5 radius.
Have a question of your own? Ask us now!
Product Reviews
I replaced my Fender Clapton Signature guitar and fit.