New Products

C-EC30-20-475 Capacitor - CE Mfg., 475V, 30/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. The C-EC30-20-475 is a great replacement for the original can capacitors found in H.H. Scott 299 amplifiers as well as others.
$36.70
C-ETX-50-IL Capacitor - Illinois, 50V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%. Axial leads. Rated for 50V max.
Starting at $0.33
P-C194TB Choke - Hammond, replacement for Vox TB35C2
16H @ 40 mA guitar amplifier replacement for Vox TB35C2 Tony Bruno. Physically, parts were designed to look similar to original factory units (where possible). Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$19.58
Save 10%
Originally: $21.75
P-Q1N5817 Diode - 1N5817, Schottky, High Switching Speed
Schottky diode with low forward voltage drop and high switching speeds.
$0.10
B-980 Fundamentals of Guitar Amplifier System Design
Books about guitar amplifier electronics usually focus on individual circuits: preamp stages, tone stacks, phase inverters, the power amp, and power supply. Fundamentals of Guitar Amplifier System Design presents a structured, top-down approach to crafting a complete guitar amplifier.
$29.95
S-G507 Grill Cloth - Oxblood, 36" Wide
Sold by the yard
$12.95
P-BAR-H492-U-10 Keeper Bar - 10 Hole, 49.2mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 49.2mm spacing. This P.A.F. correct keeper bar is great for humbucker and P-90 pickups. Made of raw steel.
$3.95
P-MB-1-X Magnet - Bar, Alnico, Cast, 2.444"
Alnico cast bar magnets for use in humbucker and P-90 pickups. These are fully magnetized through the width and measure 2.444” x .5” x .125”.
Starting at $2.25
P-MR-1-X-A2 Magnet - Rod, Alnico 2, .187", Vintage Chamfer
Alnico 2 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Tele Style pickups and many others.
$0.50
P-MR-2-X-A3 Magnet - Rod, Alnico 3, .195", Vintage Chamfer
Alnico 3 rod magnets with a .195” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for 1950s Tele style pickups and many others.
$0.65
P-MR-1-X-A5 Magnet - Rod, Alnico 5, .187", Vintage Chamfer
Alnico 5 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Strat style pickups and many others.
Starting at $0.50
P-QLM741 Op-Amp - LM741, Single, 8-Pin DIP
LM741 single opamp in an 8-pin DIP package. The LM741 has been used in classic guitar pedals such as the Distortion Plus.
The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications. The amplifiers offer many features which make their application nearly foolproof: overload protection on the input and output, no latch-up when the common mode range is exceeded, as well as freedom from oscillations.
$0.79
P-PUGRET3X Pickup - Gretsch, G5400 Blacktop Filter'Tron, Chrome
Genuine Gretsch G5400 Blacktop Filter'Tron pickups. Includes silver mounting ring, three pickup mounting screws with springs, and four mounting screws for the ring. These pickups feature a pre-wired connector for solderless connections.
$31.95
R-VAR-AX Potentiometer - Alpha, Audio, 9mm, Right Angle
Audio taper (log), right angle, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
R-VAV-AX Potentiometer - Alpha, Audio, 9mm, Vertical
Audio taper (log), vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
R-VAR-BX Potentiometer - Alpha, Linear, 9mm, Right Angle
Linear taper, right angle, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
R-VAV-BX Potentiometer - Alpha, Linear, 9mm, Vertical
Linear taper, vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
R-VAR-C25K Potentiometer - Alpha, Reverse Audio, 9mm, Right Angle, 25KΩ
Reverse audio taper (antilog), right angle, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
R-VAV-C50K Potentiometer - Alpha, Reverse Audio, 9mm, Vertical, 50K
Reverse audio taper (antilog), vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
S-H136 Screws - Gretsch®, Bezel Mount, Chrome
Genuine Gretsch® screws for mounting Gretsch pickup rings to the guitar's body. These chrome oval-head wood screws come in a pack of 12.
Accessory to P-PUGRETMR-S
$5.50
P-GTSG-STRAT-RW String Guides - Fender®, Road Worn®, for Stratocaster
Fender® Stratocaster string guides (sold individually).
String guides are also known as string trees or string retainers.
See P-GTSG-STRAT for standard version.
This product is available in the Road Worn® style. The Fender® Road Worn® series is comprised of genuine Fender® parts that have been crafted to look and feel like truly vintage parts. All parts are designed to the same specs as originals and feature patina and signs of a well played guitar part. Fender® Road Worn® parts won't stick out like a sore thumb on vintage and relic'd guitars.
$8.50
S-G488 Tolex - British Plum Bronco, 54" Wide
Sold by the yard
54" wide. Sold per yard.
$16.50
P-T800-X Transformer - Hammond, Audio Broadcast Quality, 800A Series
Features
  • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with hardware.
  • Includes wire leads (minimum length of 4").
  • Frequency response +/- 0.5 db max. from 50 Hz. to 15 Khz.
  • Insertion loss of apx. 1 db.
  • Maximum power level +15 dbm. (except 841A, 842A & 844A which are +20 dbm) with specified characteristics, or higher levels with reduced low frequency performance.
  • Electrostatic shield between pri. & sec.
  • Humbucking construction
  • Balanced split windings on pri. & sec. for circuit versatility. Primary may be used as a secondary and vice versa for impedance matching.
  • Overall dimensions 1.75" (44.5 mm) wide x 1.25" (31.8 mm) deep x 2.56" (65 mm) high max.

Part No. Application Nominal Impedance Max. Primary D.C.
$106.28
P-T850-X Transformer - Hammond, Audio Broadcast Quality, 850A Series
Features
  • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware.
  • Sealed case and wax potted core internally for stable characteristics and long life.
  • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, may be down 1 db @ 20 Khz.)
  • Insertion loss of apx. 1 db.
  • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance.
  • Distortion is apx. 1.5% @ 20 Hz. under full power.
  • Electrostatic shield between pri. & sec. connected to the green lead.
  • Humbucking construction
  • Balanced split windings on pri. & sec. for circuit versatility. Primary may be used as a secondary and vice versa for impedance matching.
  • Includes mounting hardware.
  • Lead length: Min. 4"
Starting at $108.57
Save 10%
Originally: $120.63
Don't see what you're looking for? Send us your product suggestions!