New Products

C-EC20X4-475-2D5 Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic, 2.5" Height
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/20uF 475VDC Electrolytic
  • FP / Twist Lock Style. Solder Lugs
  • -10%, +50% Tolerance, 65°C Temperature Rating
  • 1⅜"D X 2.5"H
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.70
C-UD0033-400 Capacitor - 400V, Polypropylene, Axial Leads, .0033 uF
General purpose polypropylene film capacitor.
  • Dissipation Factor: 0.001 Max at 1000 Hz and 25°C , 0.004 Max at 10 kHz and 25°C
  • Temperature Coefficient: -200 PPM/°C: -100 PPM/°C, 100 PPM/°C
  • ESR: 53.588 Ohms at 1 kHz and 20°C
  • Self Inductance: 1 Nanohenries maximum per mm of body length and lead length
  • dvdt: 15 V/µs
  • Tolerance: -10 % , +10 %
  • Temperature Range: -55°C to +105°C
    • Above 85°C the rated (DC/AC) voltage must be derated at per 1.25%°C
  • WVDC: 400 Volts DC
  • VAC: 220 Volts AC
  • Terminal to Terminal Dielectric strength: 1.6 times the rated DC voltage when applied between the terminals for 2 seconds
  • Terminal to case Dielectric strength: 2 VAC when applied between the terminals and case for 2~5 seconds
  • Insulation Resistance (Terminal to Terminal): 30000 MINIMUM after 100 Volts DC is applied for 60 seconds at 20°C
  • Insulation resistance (Termi
$0.69
G-883X Shirt - Black, Tube Amp Doctor, 25 Years
Black t-shirt from Tube Amp Doctor celebrating their 25th anniversary. Printed on a 100% cotton Fruit of the Loom shirt.
$19.95
K-956 Effects Pedal Kit - MOD® Kits, The Thunderdrive Deluxe LTD, Overdrive
The Thunderdrive Deluxe LTD is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting output and distortion controls provides a wide variety of tones in spite of its simple construction. It is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. This version is equipped with a three position diode selector switch.
The switch offers three different settings and tones. The top position is the classic silicon clipping diodes used in the original Thunderdrive. The middle position gives you the lifted diode "turbo" sound from the Deluxe model. The bottom position is a new setting limited to this version using germanium diodes for a warm vintage distortion.
$49.95
M-FLYECHO Effects Pedal - TWA, Flyboys FB-03, Echo
The TWA Flyboys FB-03 is a massive sounding delay pedal in a tiny package. This pedal takes you from the snappiest slapback sounds to big spacious delays with over 600 milliseconds of delay time. The bright and articulate delay signal keeps the mix crisp and transparent while the repeats add a touch of modulation for a warm tape like sound as the signal decays. The FB-03 Echo can go from one repeat to infinite repeats putting the pedal into self oscillation for wild feedback effects. The FB-03 Echo also features a true bypass footswitch and comes with a DC jack to battery clip converter cable.
  • 9VDC 2.5mm Barrel Connector
  • 42mA maximum current draw
  • True bypass switching
  • 20 – 620 ms delay time
  • Self oscillating
  • Extruded aluminum chassis
  • Quality components
  • 1.75” x 3.75” footprint
$79.00
P-A-C12D Speaker - Jensen® D-Series, 12", C12D, 150W
The C12D is able to return the powerful, organic, warm tone and character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar.
$133.90
P-A-C12K-2 Speaker - Jensen® Vintage Ceramic, 12", C12K-2, 100W
The C12K-2 is a 12" ferrite speaker with 100 watts of power. The C12K-2 provides a modern British voice in a vintage American package. This high-power speaker features a low-end punch with a warm, rich mid-range and smooth articulate highs. This speaker is not only capable of handling high levels of overdrive and distortion but is also capable of achieving clarity and detailed response with those sounds. The C12K-2 can beautifully produce the complex and nuanced tones of vintage and boutique amplifiers.
$106.60
P-A-G12R-X Speaker - Celestion, 12", G12 Ruby, 35W
The Celestion Ruby is vintage voiced alnico speaker that straddles the classic chime of the Blue and celebrated warmth of the modern Cream. The Ruby features a rich and musical frequency response with smooth, airy highs and a nuanced midrange with the natural bite found only in a vintage alnico speaker. This versatile 35 watt speaker is an excellent choice for a 4x12 cabinet and really shines in a single 12” cabinet or combo amp. The Celestion Ruby offers guitar players the ability to discover new tones within the spectrum of vintage sound.
$289.00
P-A-GASKET-E-12 Gaskets - Eminence, Replacement Set
(Package of 4)
Set of four genuine Eminence® replacement gaskets for one 12" speaker. ¼" thick, durable foam with adhesive on one side for mounting.
$6.00
P-A-N12D Speaker - Jensen® D-Series, 12", N12D, 150W
The N12D is able to return the feel, the warmth and the character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar. The Neodymium magnet design allows a weight reduction to only 2.4kgs.
$208.00
P-A-NEO-250-8 Speaker - Celestion, 12", Neo 250 Copperback, 250 watts
Rated at 250 W. The Celestion Neo 250 Copperback provides all of the musicality associated with classic Celestion speakers but at an enormous power rating and featherlight weight. This speaker supplies transparent tone with a tight low end, neutral low mids, clear upper mids, and controlled highs. The combination opens up the speaker in a way that can reproduce and accentuate the natural tonality and character of the amplifier. The Copperback is a versatile speaker with a wide dynamic response, excellent touch sensitivity, and endless amounts of headroom in a 5.5lb package.
$249.00
P-GRV-505FVX Tuner - Grover, Vintage, for Fender, Roto-Grip
Colors Available:
The Grover Roto-Grip 505F series are upgrades for vintage and vintage style Fenders that require zero modifications. These inline tuners feature the famous 18:1 ratio and thumb screw locking mechanism.
Starting at $71.95
P-GTARM02-RW Tremolo Arm - Fender®, Stratocaster, Road Worn®
Original Fender® Road Worn® tremolo arm with aged white tip. Metric M5 threading.
$11.95
P-GTBS-VS-RW Bridge Saddles - Fender®, for Vintage Stratocaster, Road Worn®
Original Fender® Road Worn® vintage Strat bridge saddles (6 saddles) with relic’d screws and springs for mounting each saddle. Adjustment hex wrench included.
$42.95
P-GTMH01-RW Tuning Machines - Fender® Vintage Strat/Tele, Road Worn®
Original Fender® Road Worn® tuners for vintage Fender® Stratocaster and Telecaster guitars. Set of six with relic’d mounting hardware included.
$34.75
P-GTNP-4C-FND-4 Neck Plate - Fender®, 4 Bolt, Chrome
Original Fender® neck plate for 4 hole necks with four mounting screws.
$10.95
P-GTNP-4C-FND-RW Neck Plate - Fender®, 4 Bolt, Road Worn®, Chrome
Original Fender® Road Worn® neck plate for 4 hole necks. Four relic’d mounting screws included.
The Fender® Road Worn® series is comprised of genuine Fender® parts that have been crafted to look and feel like a truly vintage part. All parts are designed to the same specs as originals and feature patina and signs of a well played guitar part. Fender® Road Worn® parts won’t stick out like a sore thumb on vintage and relic’d guitars.
$13.95
On Backorder
P-GTSB04-RW Strap Buttons - Fender®, Vintage, Road Worn®, Set of 2
Original Fender® Road Worn® vintage strap buttons. Designed to fit most Fender instruments. Relic’d mounting screws included.
$5.75
P-GTSG-STRAT-RW String Guide - Fender®, for Stratocaster, Road Worn®
Original Fender® Road Worn string guide with mounting screw and spacer.
$8.50
P-GTSG-TELE-RW String Guide - Fender®, for Telecaster, Road Worn®
Original Fender® Road Worn® string guide with mounting screw.
The Fender® Road Worn® series is comprised of genuine Fender® parts that have been crafted to look and feel like a truly vintage part. All parts are designed to the same specs as originals and feature patina and signs of a well played guitar part. Fender® Road Worn® parts won’t stick out like a sore thumb on vintage and relic’d guitars.
$8.95
P-GTVT-RW Bridge - Fender®, 3 Saddle, for Telecaster, Road Worn®, Chrome
Original Fender® Road Worn® bridge plate with three vintage steel saddles. Mounting hardware included. The Fender® Road Worn® series is comprised of genuine Fender® parts that have been crafted to look and feel like a truly vintage part. All parts are designed to the same specs as originals and feature patina and signs of a well played guitar part. Fender® Road Worn® parts won’t stick out like a sore thumb on vintage and relic’d guitars.
$62.95
P-H1050 Corner - Black Plastic, 4-Hole, Replacement for Vox / Orange
These Tube Amp Doctor black plastic corners are great replacements for Vox® and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.
$1.25
P-H162-RW Control plate - Fender®, for Vintage Telecaster, Road Worn®
Original Fender® Road Worn replacement chrome control plate for vintage Tele guitar. Fits 3/8” bushing pots.
$21.75
P-H164-RW Jack Plate - Fender®, for Stratocaster, Road Worn®, Chrome
Original Fender® Road Worn® chrome jack plate for Strat. Includes relic’d jack, nut, and mounting screws.
The Fender® Road Worn® series is comprised of genuine Fender® parts that have been crafted to look and feel like a truly vintage part. All parts are designed to the same specs as originals and feature patina and signs of a well played guitar part. Fender® Road Worn® parts won’t stick out like a sore thumb on vintage and relic’d guitars.
$13.95
Don't see what you're looking for? Send us your product suggestions!