New Products

P-H1050 Corner - Black Plastic, 4-Hole, Replacement for Vox / Orange
These Tube Amp Doctor black plastic corners are great replacements for Vox® and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.
$1.25
P-H498-X Switch - Footswitch, DPDT, Vintage Style
Heavy duty footswitch with vintage style solder lugs. Great replacement for stomp-box effects requiring a DPDT (Double Pole, Double Throw) switch. AC125V/4A AC250V/2A.
$3.95
M-FLYECHO Effects Pedal - TWA, Flyboys FB-03, Echo
The TWA Flyboys FB-03 is a massive sounding delay pedal in a tiny package. This pedal takes you from the snappiest slapback sounds to big spacious delays with over 600 milliseconds of delay time. The bright and articulate delay signal keeps the mix crisp and transparent while the repeats add a touch of modulation for a warm tape like sound as the signal decays. The FB-03 Echo can go from one repeat to infinite repeats putting the pedal into self oscillation for wild feedback effects. The FB-03 Echo also features a true bypass footswitch and comes with a DC jack to battery clip converter cable.
  • 9VDC 2.5mm Barrel Connector
  • 42mA maximum current draw
  • True bypass switching
  • 20 – 620 ms delay time
  • Self oscillating
  • Extruded aluminum chassis
  • Quality components
  • 1.75” x 3.75” footprint
$79.00
P-H225 Vent - Brass, Replacement for Vox / Marshall
Tube Amp Doctor has created an exact replica of the vents used on Vox® amps and the Marshall® Super PA. These high quality brass ventilation grills are hand crafted. Measures 0.720" x 4.805".
$8.50
T-EF86-TAD Vacuum Tube - EF86/6267, Tube Amp Doctor, Premium Selected
The Tube Amp Doctor EF86 / 6267 is a low noise and low microphonic version of the vintage pentode. These tubes were famously used in classic HiFi equipment and microphone preamps. The original Vox® AC15 circuit also used an EF86 and now, thanks to its recent availability, there are plenty of options for guitar amplifiers utilizing this unique tube.
The TAD EF86 / 6267 meets all of the standards of the Tube Amp Doctor Premium Selection process. This tube has a rugged construction featuring an aesthetically pleasing perforated shield. The TAD EF86 / 6267 will work in and EF86 or 6267 position.
$22.95
R-VX-S1 Potentiometer - Fender®, S-1, Knurled Shaft, 4PDT
Resistances Available:
The Fender® S-1™ switched pot is a stealthy way to mod a strat without drilling any extra holes. The switch can be configured for almost any configuration with its four double-throw poles. S-1™ pots use a 3/8” bushing.
$24.95
P-RTAD-4EB3C1B Reverb Tank - Tube Amp Doctor, 4EB3C1B
  • Replaces: 4EB3C1B
  • Solid, sturdy construction
  • Type: Long (2 Spring) tank
  • Decay: long decay
  • Input: 600 Ω
  • Output: 2,250 Ω
  • Connectors: Input insulated/output grounded
  • Locking: No lock
  • Mounting: Horizontal/open side down

Compatible amps include Fender® Hot Rod Deville, Hot Rod Deluxe, Blues Deluxe (reissue only), Blues Deville (reissue only). Replaces Fender® Part Number 0050394000. Also, fits Traynor™ YCV50 as well as some Music Man™ and Peavey™ models. Suitable upgrade/ replacement for the Vox™ AC30CC series amp.
"TAD redefines Spring Reverberation. When the manufacturing of Accutronics Reverb cans in the USA has been announced to close down in 2008 TAD started the research for an own high quality production of the classic spring reverberation units. The goal was to create a drop-in replacement bringing back that stunning reverb sound that Fender made so popular since the early 1960s.
The TAD Reverb Cans achieve this goal and even more: deep and smooth reverb, no fluttering but wide frequency response with airy top end instantly inspiring to enjoy guitar playing. The rock solid mechanical design assures a very dependable and consistent quality performance exceeding any expectation. A drop-in replacement and upgrade as well for vintage as for modern reverb cans by size, performance and tone."
-Tube Amp Doctor
Questions about reverb tanks? See our tech articles for more information.
$29.95
R-V250K-PAN Potentiometer - Fender®, 250K, Pan, MN Taper, Solid Shaft
Genuine Fender® 250K pan pot with center detent. Pan pots are also known as balance pots. Solid shaft with 3/8” bushing. Mounting hardware not included. See R-VNUT-38 for a compatible nut and washer.
$5.65
P-PUMC-DKN-ON Pickup - McNelly, Tele, Duckling, Neck, Open Nickel
“This is for Tele players who have a thing for the wicked vibe of a Strat neck pickup. The rich deep lows to the clear and glassy chime is all there, but squeezed into a standard Tele size.–McNelly Pickups
$100.00
S-H652N Jack - Pure Tone, ¼", Stereo, 3-Conductor, Double-Open Circuit, Long Thread
Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.
$9.99
P-GTSB04-RW Strap Buttons / Pins - Fender®, Vintage, Road Worn®, set of 2
Original Fender® Road Worn® vintage strap buttons. Designed to fit most Fender instruments. Relic’d mounting screws included.
$5.75
S-H8FW Finishing Washer - #8, Blackface/Silverface, Nickel Plated Steel
(Package of 10)
Pack of 10 nickel plated steel finishing washers. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
W-RN-920 Plug - Rean, 3.5mm, Mono, 2 Pole, Cable-Mount
High quality 3.5mm two pole (mono) plug. Features nickel plated brass contacts, with a nickel plated zinc shell. This plug uses a crimp strain relief for use with 4mm O.D cables.
See W-RN-921 for stereo version.
$0.95
P-GTNP-4C-FND-RW Neck Plate - Fender®, 4 Bolt, Road Worn®, Chrome
Original Fender® Road Worn® neck plate for 4 hole necks. Four relic’d mounting screws included.
The Fender® Road Worn® series is comprised of genuine Fender® parts that have been crafted to look and feel like a truly vintage part. All parts are designed to the same specs as originals and feature patina and signs of a well played guitar part. Fender® Road Worn® parts won’t stick out like a sore thumb on vintage and relic’d guitars.
$13.95
On Backorder
S-T307 Multi Tool - Dunlop, System 65
The Dunlop System 65 Multi Tool is a compact tool that can cover the gamut of setup work for guitars and basses. Whether it’s a pickup height issue, truss rod adjustment, or a tweak in the action, this multitool can do it all.
$11.95
P-GTVT-RW Bridge - Fender®, 3 Saddle, for Telecaster, Road Worn®, Chrome
Original Fender® Road Worn® bridge plate with three vintage steel saddles. Mounting hardware included. The Fender® Road Worn® series is comprised of genuine Fender® parts that have been crafted to look and feel like a truly vintage part. All parts are designed to the same specs as originals and feature patina and signs of a well played guitar part. Fender® Road Worn® parts won’t stick out like a sore thumb on vintage and relic’d guitars.
$62.95
P-PGA1-RW Pickguard Screws - Fender®, Road Worn®, Set of 24
Original Fender® Road Worn® pickguard screws. Package of 24.
$6.95
P-H336X Handle - Modern Style, Black Grip, Die-cast Ends
This handle has a flexible molded black grip with two rugged die-cast mounts. There are two holes per mount for use with M4 screws. See specifications below for dimensions.
$2.95
P-A-C12K-2 Speaker - Jensen® Vintage Ceramic, 12", C12K-2, 100W
The C12K-2 is a 12" ferrite speaker with 100 watts of power. The C12K-2 provides a modern British voice in a vintage American package. This high-power speaker features a low-end punch with a warm, rich mid-range and smooth articulate highs. This speaker is not only capable of handling high levels of overdrive and distortion but is also capable of achieving clarity and detailed response with those sounds. The C12K-2 can beautifully produce the complex and nuanced tones of vintage and boutique amplifiers.
$106.60
T-6SL7GT-TAD Vacuum Tube - 6SL7GT, Tube Amp Doctor, Premium Selected
The Tube Amp Doctor 6SL7GT meets all of the reliability and quality requirements of a TAD Premium Selected tube including low noise and gain balanced triodes. This 6SL7 has a great lively tone with smooth and clear highs and a sonically rich mid range. The TAD 6SL7GT can also be used as an upgrade for Russian 6N9 and 6N9P tubes.
$24.95
S-CMP19 Refill Pack for Ultimate Fret Polishing System - Lizard Spit
This pack includes 24 fresh fret polishing pads for use with the Lizard Spit Ultimate Fret Polishing System, S-CMP15.
$4.50
P-RTAD-9AB2C1B Reverb Tank - Tube Amp Doctor, 9AB2C1B
  • Replaces: 9AB2C1B
  • Solid, sturdy construction
  • Type: Long (3 Spring) tank
  • Decay: medium decay
  • Input: 10 Ω
  • Output: 2,575 Ω
  • Connectors: Input insulated/output grounded
  • Locking: No lock
  • Mounting: Horizontal/open side down


Compatible amps include select Fender® models, plus others.
"TAD redefines Spring Reverberation. When the manufacturing of Accutronics Reverb cans in the USA has been announced to close down in 2008 TAD started the research for an own high quality production of the classic spring reverberation units. The goal was to create a drop-in replacement bringing back that stunning reverb sound that Fender made so popular since the early 1960s.
The TAD Reverb Cans achieve this goal and even more: deep and smooth reverb, no fluttering but wide frequency response with airy top end instantly inspiring to enjoy guitar playing. The rock solid mechanical design assures a very dependable and consistent quality performance exceeding any expectation. A drop-in replacement and upgrade as well for vintage as for modern reverb cans by size, performance and tone."
-Tube Amp Doctor
Questions about reverb tanks? See our tech articles for more information.
$33.95
P-GRV-505FVX Tuner - Grover, Vintage, for Fender, Roto-Grip
Colors Available:
The Grover Roto-Grip 505F series are upgrades for vintage and vintage style Fenders that require zero modifications. These inline tuners feature the famous 18:1 ratio and thumb screw locking mechanism.
Starting at $71.95
P-PUMC-SSN-N Pickup - McNelly, Stagger Swagger, Neck, Nickel
This McNelly Stagger Swagger neck pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.
$130.00
Don't see what you're looking for? Send us your product suggestions!