New Products

P-COV-TNO-U-X Cover - Tele, Neck, Open, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for open-style tele neck pickups. These premium tele covers are made of nickel silver.
Starting at $8.50
K-999 Effects Pedal Kit - MOD® Kits, The Saturator
The Saturator is an overdrive pedal kit that can cover a wide range of gain effects, transitioning smoothly from a massive clean boost to a warm and saturated distortion with the turn of a knob. The saturation is controlled with the "Soak" knob, which dials in the amount of symmetrical soft-clipping applied to the guitar signal. When fully counterclockwise , the signal is unaffected and clean. Rotating the knob clockwise will incrementally increase the soft-clipping, morphing from a clean signal through subtle-to-heavy saturated overdrive sounds and straight into distortion territory. The "Level" knob sets the overall volume of the clean or saturated output. Unity gain is at roughly 8 o'clock. With the "Soak" set to clean, rotating the "Level" knob clockwise will increase the level to upwards of 30dB.
$47.95
M-EQD-PAL Effects Pedal – EarthQuaker Devices, Palisades™, Mega Ultimate Overdrive
The Palisades is something we said we would never do… an overdrive based on the legendary TS808! After loads of requests, we finally buckled. We ran tests with every popular clone on the market as well as several vintage originals, compared, contrasted and took loads of notes. It was exhausting but informative. In the end, we threw it all away, used our ears and came up with what we feel is the most versatile relative of the 808 available today. With 6 different clipping voices, 5 bandwidth settings and 2 gain channels, you will be hard-pressed to not find a setting that will wipe every mid-boosting overdrive off your board. The Palisades is a versatile dude that will give you years of loving companionship.
$249.00
R-VT96Y-X Trimmer - Bourns, 3296Y, Multiturn, Top Adjust, PCB Mount
High-quality Bourns 3296Y trimpots. These sealed cermet trimmers have 25 turns for precision setting. ±10% tolerance.
$1.65
P-PUGT-TN-X Pickup - Gotoh, TL-Classic, Neck, Tele Style, Made In Japan
The TL-Classic neck is an authentic take on the tele neck pickup. With Alnico 5 rod magnets, vulcanized fiberboard flatwork, and a long skirted cover, the TL-Classic neck offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.
Starting at $38.95
M-EQD-AN Effects Pedal – EarthQuaker Devices, Afterneath™, Otherworldly Reverberator
The Afterneath sounds a lot like it looks – a wizard in a cave in a box. You are the wizard – or sorceress, if you prefer – and the cave is your instrument’s signal, vast, expansive, and magical. Do you go inside? Roll a D20 to proceed! Once inside, a reflection of light from an unknown source catches your eye, and you notice a bizarre sheen on the walls of the cave. You timidly inch closer to the walls of the cave. Placing your hand gently on the cavern wall, you feel the rock move. The cave is alive! Alarmed, you emit a loud gasp, which reverberates throughout the subterranean landscape. Upon further listening, it appears as though the reverberations of your voice are in fact a swarm of short digital delays which may be used to create wild and cavernous reverbs, or scattered, short, rhythmic delays with bizarre characteristics.
$229.00
P-BAR-P90S-U-10 Keeper Bar - 10 Hole, 50mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 50mm spacing. The keeper bar is designed for use with soapbar P-90 pickups. The spare holes are for the pickup mounting screws. This premium keeper bar is made of raw steel.
$3.95
C-ETRX-25 Capacitor - 25V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.
Starting at $0.15
P-K385X Knob - Pointer, Large, Knurled, White Index Line
Colors Available:
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers.
$0.95
P-BAS-H50-SL-U Baseplate - Humbucker, 50mm, Universal, USA
Original, made in USA, humbucker frame with universal holes for multiple configurations. This premium baseplate has a 50mm spacing and is made of raw nickel silver.
$6.25
S-H348S-U-X Machine Screw - 3-48 x 1”, Phillips, Pan Head
Colors Available:
Original, made in USA, 3-48 x 1” machine screws. These premium screws are perfect for mounting humbucker pickups that need a shorter screw.
$0.35
P-G107-BWB Pickguard - For '57 Strat®, 8 Hole, 3-Ply
Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:
  • 3-ply / 2.5mm thickness
  • 8 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
$10.25
P-COV-H50-U-X Cover - Humbucker, 50mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Starting at $5.95
P-SLG-187X-U-X Slug - 1215 Steel, 0.187" Diameter, for Humbucker Pickups
Colors Available:
Original, made in USA, steel slugs for making humbucker pickups. These premium slugs are made of 1215 steel. These parts are made using the same materials and processes as the most sought after vintage parts.
$0.40
B-978 Tube Lore II, A Reference for Users and Collectors, 2nd Edition
The classic Ludwell Sibley book is now available in this wonderful second edition. Tube Lore II contains a wealth of knowledge and information on a wide variety of tube types. Any tube collector or radio aficionado will find the contents of this book to be an invaluable reference.
$29.95
G-889 Shirt - Black, Amplified Parts Speaker Logo, Men's Sizes
High quality black shirt featuring the Amplified Parts speaker logo printed on the front. Next Level Apparel CVC Crew shirt. Top of the line fabric that stands up to the consistent wear without sacrificing fit or feel. Made from a super soft cotton/polyester blend.
$19.95
P-QLF353 Op-Amp - LF353, Dual, Wide-Bandwidth, JFET Input, 8-Pin DIP
Dual wide-bandwidth LF353 opamps in an 8-pin DIP package. The LF353 offers a high input impedance and 3MHz bandwidth.
This LF353 device is a low-cost, high-speed, JFET input operational amplifier with very low input offset voltage. It requires low supply current yet maintains a large gain-bandwidth product and a fast slew rate. In addition, the matched high-voltage JFET input provides very low input bias and offset currents.
$0.34
P-A-G10-GOLD-8-B Speaker - Celestion, 10", G10 Alnico Gold, 40W, B-Stock, 8Ω
B-Stock Speaker Blowout! You get a great deal on these speakers because they have been mounted. They have evidence of use such as solder on the lugs or scuffed paint at the mounting holes. All speakers have been tested and have full warranty.
The G10 Gold is the ultimate 10" speaker, blending unmistakable Alnico class with a rich low-end, creamy midrange and vintage chiming top-end. Springy, warm, revealing and highly expressive, it can be used singly or in pairs to add a classy sheen to any amp, or in a 4x10 configuration for higher volume depth, warmth and shimmer, with less of the boom associated with 4x12 cabinets.
$140.00
P-POL-540-U-X Polepiece - Fillister, 5-40 x 0.75”, 1018 Steel, USA
Colors Available:
Original, made in USA, fillister head screws for use as polepieces in pickups. These premium polepieces have a 5-40 threading with a 0.75” length.
Starting at $0.50
P-PUGT-2X-X Pickup - Gotoh, HB-Classic, Humbucker, Made In Japan
The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.
Starting at $34.95
M-EQD-RM Effects Pedal – EarthQuaker Devices, Rainbow Machine™, Polyphonic Pitch Mesmerizer
Welcome to the Rainbow Machine, in all its synthetic glory! This one is for experimenters, adventurists, and noisemakers. Totally not for purists and/or tone hounds. There are no “natural sounds” that come from this box. It takes modern DSP and uses it as a tool of future past to create real-time pitch shifting using digital oscillators.
$229.00
P-COV-HNH-U-X Cover - Humbucker, No Holes, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.
Starting at $7.95
C-EC80-50-20-20-350 Capacitor - CE Mfg., 350V, 80/50/20/20µF, Electrolytic, 2.5" Height
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
M-EQD-DC Effects Pedal – EarthQuaker Devices, Data Corrupter™, Monophonic Harmonizing PLL
The Data Corrupter is a monophonic analog harmonizing PLL with modulation. It takes your input signal and brutally amplifies it into a crushing square wave fuzz tone that is then multiplied, divided and modulated to create a wild, yet repeatable, three-voice guitar synthesizer. The Master Oscillator is the central nervous system at the heart of the Data Corrupter’s cyberpunk hive mind. It feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2) for maximum compatibility with your preferred instrument and frequency register. Once you’ve chosen your input octave, then the Data Corrupter will perform its calculations and spit out an analog synthesized frequency, which can be pitch-bent for portamento or vibrato sounds by the Frequency Modulator! From there, you can blend in one of eight Subharmonic intervals up to three octaves below the input and mix in a square wave fuzz tone for maximum data corruption.
$229.00
Don't see what you're looking for? Send us your product suggestions!