New Products

S-T306 Flashlight - Dunlop, System 65 gig
The Dunlop System 65 Gig Light is a high lumen, road ready flashlight. At 3.7” in length it easily fits in a gig bag or pocket and can be safely secured with its metal belt clip. This flash light has three different modes that can be accessed by lightly tapping the power switch: high beam, low beam, and strobe. The beam can also be focused by adjusting the lens providing up to 100 yards of visible light with a tight focus. This waterproof flashlight runs on a single AA battery which is included.
$9.95
P-BAS-MH-SL-U Baseplate - Mini Humbucker, 50mm, USA
Original, made in USA, mini humbucker frame. This premium baseplate has a 50mm spacing and is made of raw nickel silver.
$5.95
S-H348L-U-X Machine Screw - 3-48 x 1-1/4”, Phillips, Pan Head
Colors Available:
Original, made in USA, 3-48 x 1-¼” machine screws. These premium screws are perfect for mounting humbucker pickups.
Starting at $0.30
P-A-N12D Speaker - Jensen® D-Series, 12", N12D, 150W
The N12D is able to return the feel, the warmth and the character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar. The Neodymium magnet design allows a weight reduction to only 2.4kgs.
$208.00
P-COV-HO-U-X Cover - Humbucker, Open, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.
Starting at $7.95
P-COV-H492-U-X Cover - Humbucker, 49.2mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 49.2mm spacing.
Starting at $5.95
P-K451 Knob - Marshall, Brown, Gold Cap, Push-On
Genuine Marshall® knob for 18 teeth knurled pot shafts. Used on the MG100HDFX, G100RCD, and other models. Sold individually.
$4.25
P-GKLU-KAB110M Anchor Bushings - Kluson, Metric Thread, Zinc, Set of 2
Pair of standard stop bar anchor bushings for stud mounts with fine knurling and fits most guitars using a 0.986” body depth for the anchors. Made from zinc. Pairs with P-GKLU-KLP1099X studs. Studs sold separately.
$5.95
G-890 Shirt - Indigo, Amplified Parts Speaker Logo, Men's Sizes
High quality indigo shirt featuring the Amplified Parts speaker logo printed on the front. Next Level Apparel CVC Crew shirt. Top of the line fabric that stands up to the consistent wear without sacrificing fit or feel. Made from a super soft cotton/polyester blend.
$19.95
P-PUMC-DKN-ON Pickup - McNelly, Tele, Duckling, Neck, Open Nickel
“This is for Tele players who have a thing for the wicked vibe of a Strat neck pickup. The rich deep lows to the clear and glassy chime is all there, but squeezed into a standard Tele size.–McNelly Pickups
$110.00
G-885 Shirt - Black, Amplified Parts Pick Logo, Men's Sizes
High quality black shirt featuring the Amplified Parts pick logo printed on the front. Next Level Apparel CVC Crew shirt. Top of the line fabric that stands up to the consistent wear without sacrificing fit or feel. Made from a super soft cotton/polyester blend.
$19.95
P-GBV7-LP-X Vibrato - Bigsby Vibramate Set, B7 / V7 Les Paul
Colors Available:
This is a complete set that includes an original Bigsby B5 and a matching Vibramate V7-LP for use with most standard carved top Les Paul® guitars with a stop tailpiece and tune-o-matic bridge.
Starting at $219.90
P-COV-MH-U-X Cover - Mini Humbucker, 50mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for mini humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Starting at $9.25
S-H8FW Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
P-BOB-H492P-U-SCR-X Bobbin - Humbucker, PAF, 49.2mm, Screw Side, Butyrate, USA
Colors Available:
Original, made in USA, PAF-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.
$2.75
S-T307 Multi Tool - Dunlop, System 65
The Dunlop System 65 Multi Tool is a compact tool that can cover the gamut of setup work for guitars and basses. Whether it’s a pickup height issue, truss rod adjustment, or a tweak in the action, this multitool can do it all.
$11.95
On Backorder
P-BAS-P90D-N-U Baseplate - P-90, Dog Ear, Neck, 47.55mm, USA
Original, made in USA, dog ear P-90 frame with a 47.55mm spacing traditionally used in the neck position. This premium baseplate is made of raw nickel silver.
$6.90
T-6W5-G Vacuum Tube - 6W5-G, Rectifier, Full Wave
New Old Stock 6W5-G. Full-wave high-vacuum rectifier.
$19.95
P-GTNP-4C-FND-X Neck Plate - Fender®, 4 Bolt, chrome
Original Fender® neck plate for 4 hole necks with four mounting screws.
Starting at $10.95
P-BAS-H492-CH-SL-U Baseplate - Humbucker, 49.2mm, Center Hole, Short Leg, USA
Original, made in USA, humbucker frame with center holes for making single coil pickups in a humbucker footprint. This premium baseplate has a 49.2mm spacing and is made of raw nickel silver.
$6.25
S-H138-U-N Wood Screw - #3 x 1-3/8”, Phillips, Round Head
Original, made in USA, #3 x 1-3/8” wood screws. These premium screws are nickel plated and are perfect for pickups that are directly mounted to the guitar body such as P-90 and Thunderbird pickups.
$0.30
W-AM-AC3FJ XLR Plug - Amphenol, 3-Pole, Female, Large Jaw, Nickel
XLR 3 pole female, stamped contacts, large jaws cable clamp.
$2.35
P-H9800 Foot - Synthetic Rubber, 0.51" Height x 1.60" Diameter
Package of 4
Set of four, black, synthetic rubber feet. Molded from one piece with a textured no-slip surface.
$0.80
G-892 Shirt - Black, Amplified Parts Pick Logo, Women's Sizes
High quality black shirt featuring the Amplified Parts pick logo printed on the front. Next Level Apparel CVC Crew shirt. Top of the line fabric that stands up to the consistent wear without sacrificing fit or feel. Made from a super soft cotton/polyester blend.
$19.95
Don't see what you're looking for? Send us your product suggestions!