New Products

P-PUGT-2X-X Pickup - Gotoh, HB-Classic, Made In Japan
The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.
Starting at $34.95
P-PUGT-TX-X Pickup - Gotoh, TL-Classic, Made In Japan
The TL-Classic is an authentic take on the tele pickup. With flat Alnico 5 pole pieces (bridge), Alnico 5 rod magnets (neck), vulcanized fiberboard flatwork, a copper plated base plate (bridge), and a long skirted cover (neck), the TL-Classic offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.
Starting at $26.95
K-999 Effects Pedal Kit - MOD® Kits, The Saturator
The Saturator is an overdrive pedal kit that can cover a wide range of gain effects, transitioning smoothly from a massive clean boost to a warm and saturated distortion with the turn of a knob. The saturation is controlled with the "Soak" knob, which dials in the amount of symmetrical soft-clipping applied to the guitar signal. When fully counterclockwise , the signal is unaffected and clean. Rotating the knob clockwise will incrementally increase the soft-clipping, morphing from a clean signal through subtle-to-heavy saturated overdrive sounds and straight into distortion territory. The "Level" knob sets the overall volume of the clean or saturated output. Unity gain is at roughly 8 o'clock. With the "Soak" set to clean, rotating the "Level" knob clockwise will increase the level to upwards of 30dB.
$47.95
P-PUGT-1X-X Pickup - Gotoh, ST-Classic, Made In Japan
The ST-Classic is an amazing homage to the 1960’s strat pickup. With staggered Alnico 5 rod magnets, vulcanized fiberboard flatwork, and enamel coated wire, the ST-Classic offers a truly vintage sound. These pickups are wax potted for sonic stability, feature a bevel on the magnets, and use cloth pushback wire for an easy and clean install. A cover, mounting screws and springs are included. Made in Japan.
$27.95
C-EC100X3-20-200 Capacitor - CE Mfg., 200V, 100/100/100/20µF, Electrolytic, 3" Height
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
C-EC80-50-20-20-350 Capacitor - CE Mfg., 350V, 80/50/20/20µF, Electrolytic, 2.5" Height
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
C-EC100X3-200 Capacitor - CE Mfg., 200V, 100/100/100µF, Electrolytic, 2.5" Height
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
P-PUGT-TN-X Pickup - Gotoh, TL-Classic, Neck, Made In Japan
Colors Available:
The TL-Classic neck is an authentic take on the tele neck pickup. With Alnico 5 rod magnets, vulcanized fiberboard flatwork, and a long skirted cover, the TL-Classic neck offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.
Starting at $38.95
C-ETRX-160 Capacitor - 160V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 160VDC.
Starting at $0.42
C-ETRX-450 Capacitor - 450V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 450VDC.
Starting at $0.60
C-ETR100-100 Capacitor - 100V, 100µF, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 100VDC.
$1.05
C-ETRX-50 Capacitor - 50V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 50VDC.
$0.15
C-ETRX-25 Capacitor - 25V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.
Starting at $0.15
P-H1431-10X Cover Plate - Hammond, Steel, 8" x 4", 20 Gauge
Colors Available:
Special Order Item
Hammond Mfg 20 gauge steel 8” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$5.06
Out of Stock
T-6W5-G Vacuum Tube - 6W5-G, Rectifier, Full Wave
New Old Stock 6W5-G. Full-wave high-vacuum rectifier.
$19.95
R-VTL5C1-P Optocoupler - Vactec, VTL5C1, Vactrol, New Old Stock
New old stock Vactec VTL5C1 vactrols from Perkin Elmer Optoelectronics. These premium vactrols are a great choice for use in phasers, compressors, tremolos, and synth modules such as low-pass gates. They are also used in switching circuits in amplifiers. Limited quantities are available.
$10.95
S-H348L-U-X Machine Screw - 3-48 x 1-1/4”, Phillips, Pan Head
Colors Available:
Original, made in USA, 3-48 x 1-¼” machine screws. These premium screws are perfect for mounting humbucker pickups.
Starting at $0.30
S-H348S-U-X Machine Screw - 3-48 x 1”, Phillips, Pan Head
Colors Available:
Original, made in USA, 3-48 x 1” machine screws. These premium screws are perfect for mounting humbucker pickups that need a shorter screw.
$0.35
S-H212-U-BR Wood Screw - #2 x 1/2”, Phillips, Round Head, Brass
Original, made in USA, #2 x ½” wood screws. These premium screws are made of raw brass and are perfect for mounting bobbins to baseplates. These are reproductions of the PAF style mounting screws.
$0.25
S-H138-U-N Wood Screw - #3 x 1-3/8”, Phillips, Round Head
Original, made in USA, #3 x 1-3/8” wood screws. These premium screws are nickel plated and are perfect for pickups that are directly mounted to the guitar body such as P-90 and Thunderbird pickups.
$0.30
P-RNG-MH-U-X Mounting Ring - Mini Humbucker / Firebird, USA
Colors Available:
Original, made in USA, mounting rings for mini humbucker and Firebird pickups. These premium metal mounting rings offer an elegant upgrade to the standard plastic rings.
Starting at $9.25
P-COV-H492-U-X Cover - Humbucker, 49.2mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 49.2mm spacing.
Starting at $5.95
P-SLG-187X-U-X Slug - 1215 Steel, 0.187" Diameter, for Humbucker Pickups
Colors Available:
Original, made in USA, steel slugs for making humbucker pickups. These premium slugs are made of 1215 steel. These parts are made using the same materials and processes as the most sought after vintage parts.
$0.40
P-A-F12-X200-8 Speaker - Celestion, 12", F12-X200, 200W, 8Ω
The F12-X200 is Celestion’s answer to the growing trend of full-range flat-response speakers. The F12-X200 provides a massive 200W power rating. Celestion’s decades of experience in speaker construction shines in this unique design that offers neutral voicing while maintaining the feel and response of a Celestion guitar speaker.
$149.00
On Backorder
Don't see what you're looking for? Send us your product suggestions!