New Products

P-H54-NUT-DRESS Nut - Dress Nut, For Mini Toggle Switches
Genuine Carling Technologies dress nuts for use with Carling mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 15/32-32 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$0.49
P-H5410 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
$2.75
W-QP-NUT-K Nut - Knurled, For Qingpu Jacks
Knurled, slotted nut for W-QP-419GR and W-QP-518MA 3.5mm jacks.
$0.07
W-QP-518MA 3.5mm Jack - Qingpu, Mono, Switched Tip, PC Mount
PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
$0.45
P-H545-SUB Switch - Carling, Submini Toggle, DPDT, 2 Position, PC Pins
Carling submini toggle switch, DPDT, 2 position, .195" mounting hole diameter, 0.236" bushing length.
$3.95
P-H5411 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$2.79
P-H546X Switch - Carling, Mini Toggle, DPDT, 3-Position, PC Pins
Carling mini-toggle switch, double pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position.
Starting at $3.10
P-H548 Switch - Carling, Mini Toggle, SPDT, 2-Position, PC Pins
Carling mini-toggle switch, SPDT, PC Pins. 2-Position.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • PC mount pins
$2.50
W-QP-NUT-H Nut - Hex, For Qingpu Jacks
Hex nut for W-QP-419GR and W-QP-518MA 3.5mm jacks.
$0.07
W-QP-WASHER Washer - Flat, For Qingpu Jacks
Flat washer for W-QP-419GR and W-QP-518MA 3.5mm jacks.
$0.07
W-QP-419GR 3.5mm Jack - Qingpu, Stereo, PC Mount
PCB mounted 3.5mm stereo jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
$0.45
P-H548-SUB Switch - Carling, Submini Toggle, SPDT, 2 Position, PC Pins
Carling submini toggle switch, SPDT, 2 position, .195" mounting hole diameter, 0.236" bushing length.
$3.95
P-H54-CAP-X Switch Accessory - Mini Toggle Caps
Colors Available:
Rubber caps for mini toggle switches in a variety of colors. These are made for standard sized toggle bats.
Starting at $0.39
P-H5412 Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lug
Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On
$3.89
P-H549 Switch - Carling, Mini Toggle, SPDT, 3-Position, PC Pins
Carling mini-toggle switch, single pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position, On-Off-On.
$3.89
S-T-PICKPUNCH Guitar Pick Punch - For Making DIY Picks
This guitar pick punch is great for making your own guitar picks out of a wide variety of material. Two pick sheets are included but it is also great for making novelty picks out of old gift cards, IDs, credit cards, hotel key cards, and anything else you can think of.
This pick punch makes a great gift for any guitar player.
$21.99
P-PC-3PDT-BOARD-X PCB - Daughterboard for Wiring 3PDT Footswitches
Our 3PDT PCB daughterboard is a small board designed to simplify the wiring of 3PDT footswitches in guitar pedals. All inputs and outputs are clearly labeled on the PCB, removing any confusion about how the footswitch should be wired, and decreasing the chances of wiring mistakes or short-circuits.
Starting at $0.69
S-H9NT-R Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
$0.59
P-STIC-X IC Socket - Dual Leaf, For Dip Packages, 7.62" Row Spacing
IC sockets can be soldered into PCBs, stripboard, or padboard and the IC can then be inserted into it instead of soldering the IC directly to the board. IC sockets are optional, but using one allows you to easily swap out ICs (e.g. to compare various op amps in a working circuit), easily replace ICs if one fails, and protects the IC from excess heat when soldering.
Starting at $0.15
S-HSO-M3-X Standoff - M3, Male-Female, Aluminum, 5.5mm Diameter
  • Finish/Plating: Clear Iridite
  • Material: Aluminum
  • OD: 5.5mm
  • Shape: Hex (Metric)
  • Style: M-F Standoff
  • Thread Depth(D): 8mm
  • Thread Length (TL): 8mm
  • Thread: M3
  • Type: Threaded Standoffs
Starting at $0.60
P-H-LEHLE-BTN-X Footswitch - Lehle, SPST, Momentary, Soft Click, Long Life
The LEHLE SWITCH BTN is a momentary foot switch. It is housed in an M12 threaded enclosure made of stainless steel. Thanks to the gold plated contact material its life span is at least one million switching cycles electrically and mechanically. Hardware included.
Starting at $13.95
P-T-LEHLE-HZ-L Transformer - Lehle, Audio, Line Isolation, High Impedance
The Lehle Transformer HZ is the ideal component to avoid hum loops or to balance and unbalance signals without degrading the sound of high impedance signal sources.
$65.89
P-T-LEHLE-MZ-L Transformer - Lehle, Audio, Line-Bridging, Unbalanced to Balanced
The LEHLE TRANSFORMER MZ is the ideal component to avoid hum loops without degrading the sound. It achieves this through galvanic isolation of low to mid impedance audio signal sources. It can be used as an input or output transformer, for balanced or unbalanced signals.
$43.89
P-H-LEHLE-SW-X Relay Module - Lehle, Relay True Bypass Switching Unit
The LEHLE MODULE SW is a true bypass switching unit with relay and an active pop suppression function controlled by an intelligent microcontroller circuit, thereby allowing the LEHLE MODULE SW to switch even faster than mechanical switches, noise-free and without wear.
Starting at $21.89