New Products

C-ETX-50-IL Capacitor - Illinois, 50V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%. Axial leads. Rated for 50V max.
Starting at $0.33
B-979 Guitar Amplifier Electronics: Circuit Simulation
This book is a step-by-step tutorial for simulating vacuum tube guitar amplifiers using LTspice, a free SPICE-based electronic circuit simulator for Windows and macOS. The book walks you through the basics of developing a schematic, setting up a simulation, integrating vacuum tube models, and interpreting the results. From there it gradually ramps up to advanced topics, like verifying the sonic performance of a guitar amplifier as a complete system, analyzing the dynamics of overdrive, and writing new SPICE models for triodes and power tubes.
$29.95
R-VAV-BX Potentiometer - Alpha, Linear, 9mm, Vertical
Linear taper, vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
R-VAR-AX Potentiometer - Alpha, Audio, 9mm, Right Angle
Audio taper (log), right angle, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
P-T290-FENDER-240 Transformer - Hammond, Guitar Amplifier, replacement for Fender, 240 V
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • See P-T290-FENDER-120 for 120 V transformers, P-T290-Fender-120-UP for upgraded 120 V transformers

Warning: Not all amplifier models of the same name use the same transformer model.
Starting at $41.00
P-T290-FENDER-120-UP Transformer - Hammond, Guitar Amplifier, replacement for Fender, 120 V upgrade
  • Designed for drop in replacement of original units. Upgraded units with variable voltage.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • See P-T290-FENDER-120 for 120 V basic transformers, P-T290-FENDER-240 for 240 V transformers

Warning: Not all amplifier models of the same name use the same transformer model.
Starting at $84.18
R-VAV-AX Potentiometer - Alpha, Audio, 9mm, Vertical
Audio taper (log), vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
P-GTSG-STRAT-RW String Guides - Fender®, Road Worn®, for Stratocaster
Fender® Stratocaster string guides (sold individually).
String guides are also known as string trees or string retainers.
$8.50
R-VAR-BX Potentiometer - Alpha, Linear, 9mm, Right Angle
Linear taper, right angle, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
R-VAR-C25K Potentiometer - Alpha, Reverse Audio, 9mm, Right Angle, 25KΩ
Reverse audio taper (antilog), right angle, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
B-980 Fundamentals of Guitar Amplifier System Design
Books about guitar amplifier electronics usually focus on individual circuits: preamp stages, tone stacks, phase inverters, the power amp, and power supply. Fundamentals of Guitar Amplifier System Design presents a structured, top-down approach to crafting a complete guitar amplifier.
$29.95
C-EC30-20-475 Capacitor - CE Mfg., 475V, 30/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. The C-EC30-20-475 is a great replacement for the original can capacitors found in H.H. Scott 299 amplifiers as well as others.
$36.70
R-VAV-C50K Potentiometer - Alpha, Reverse Audio, 9mm, Vertical, 50K
Reverse audio taper (antilog), vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are poplar in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.75
P-BAR-H492-U-10 Keeper Bar - 10 Hole, 49.2mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 49.2mm spacing. This P.A.F. correct keeper bar is great for humbucker and P-90 pickups. Made of raw steel.
$3.95
P-T290-YORKVILLE Transformer - Hammond, Guitar Amplifier, replacement for Yorkville / Traynor
  • Replacement for Yorkville/Traynor amplifiers
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Part No. Primary Secondary 1 Secondary 2 Secondary 3 Yorkville / Traynor Amp Yorkville / Traynor Part No VAC Hz. P-T290TRA 120 V 60 Hz. 320 V @ 600 mA 60 V @ 50 mA 6.3 V.C.T. @ 9 A 100 Watt Bass A-1380 P-T290TRB 120 V 60 Hz. 620 V @ 115 mA 6.3 V.C.T. @ 115 mA YBA2-B A-1314 P-T291JX 120 V 60 Hz. 320 V @ 500 mA 60 V @ 20 mA 6.65 V.C.T.
Starting at $76.50
P-GKLU-P3V-X Tuners - Kluson, Prestige, Vertical, 3 per side
Color / Button Types Available:
Kluson's Prestige Series vertical mount tuners have a beautiful vintage style with a modern gear ratio for precision performance. Set includes mounting screws and bushings.
Starting at $44.75
P-T1750ORF Transformer - Hammond, Output, replacement for Orange Rocker 30
Hammond output transformer - replacement for Orange Rocker 30 Specifications: Part No. Pri Ohms Sec Ohms Amplifier Type Watts Bobbin/Paper Winding Equivalent To P-T1750ORF 6,000 C.T. 8, 16 Push-Pull 35 W Bobbin OT199SL
$58.50
P-T290-AMPEG Transformer - Hammond, Guitar Amplifier, replacement for Ampeg
  • Replacement for Ampeg amplifiers
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".



Part No.
Primary
Ampeg Model Names
Ampeg Part No
Bobbin/Paper Wound


VAC
Hz.




P-T291GX
120 V
60 Hz.
B25
12XA
Bobbin


P-T290CAZ
117 V
60 Hz.
Gemini VI 25W
PT 113
Bobbin


P-T290ETX
120 V
60 Hz.
Super Echo Twin
PT 109
Bobbin


P-T291HX
110 / 115 / 230 V
50 / 60 Hz.
V50H
94-270-030
Bobbin
Starting at $75.30
P-PUF68 Pickup - Fender®, Fat ’50s, Stratocaster®, Set of 3
Package of 3
Fender® Custom Shop’s hot-rodded take on a vintage pickup set has quickly become a modern classic. Built onto the core of 1950s Fender® single coil pickups, the Fat ‘50s are wound to enhance the bass response while maintaining a smooth midrange and the top end clarity and brilliance of the originals.
$189.95
P-C194TB Choke - Hammond, replacement for Vox TB35C2
16H @ 40 mA guitar amplifier replacement for Vox TB35C2 Tony Bruno. Physically, parts were designed to look similar to original factory units (where possible). Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$21.75
P-GKLU-P3H-NO Tuners - Kluson, Prestige, Horizontal, 3 per side
Kluson's Prestige Series horizontal mount tuners have a beautiful vintage style with a modern gear ratio for precision performance. Set includes mounting screws.
$59.95
P-293 Heat Sink - For TO-220, Through Hole, Vertical Mount
Black extruded heatsink with radial fins for use with TO-220 and TO-202 transistor packages.
$1.50
T-E83CC-JJ Vacuum Tube - E83CC Frame Grid, JJ Electronics
Alternative to the 12AX7 or ECC83. The JJ Electronic E83CC is a high quality dual triode that rivals the NOS version of this tube. The E83CC was originally designed as an audio specific dual triode with very low noise and microphonics. The JJ E83CC stays true to the original design with the signature thick frame grid and boxed plate. The rigid frame allows for tighter tolerances and closer construction which results in lower noise and increased stability. The JJ Electronic E83CC is a great choice for high fidelity amplifiers as well as guitar amps and studio equipment. The E83CC has the same pinout and amplification factor as a standard 12AX7 and can be used in any 12AX7 or ECC83 position. Guitarist Description: This frame grid tube has an incredibly rich yet balanced tone. The E83CC works well for clean sounds but also breaks up with a satisfying warmth and plenty of articulation.
$21.95
P-SAYJ-T-SHORT Tube Converter - Yellow Jackets®, YJShort, Triode Version, Converter Only
Converter-only version of the P-YJSHORT-T now available for a limited time. Tubes not included. Requires an EL84 vacuum tube.
$45.00
Don't see what you're looking for? Send us your product suggestions!