New Products

P-PUF68 Pickup - Fender®, Fat ’50s, Stratocaster®, Set of 3
Package of 3
Fender® Custom Shop’s hot-rodded take on a vintage pickup set has quickly become a modern classic. Built onto the core of 1950s Fender® single coil pickups, the Fat ‘50s are wound to enhance the bass response while maintaining a smooth midrange and the top end clarity and brilliance of the originals.
$170.96
Save 10%
Originally: $189.95
G-887 Shirt - Silk Gray, Amplified Parts Pick Logo, Men's Sizes
High quality silk gray shirt featuring the Amplified Parts pick logo printed on the front. Next Level Apparel CVC Crew shirt. Top of the line fabric that stands up to the consistent wear without sacrificing fit or feel. Made from a super soft cotton/polyester blend.
$19.95
P-QTL062 Op-Amp - TL062, Dual, Low-Power, JFET Input, 8-Pin DIP
Dual low power opamps in an 8-pin DIP package. The TL062 offers a high input impedance and 1MHz bandwidth.
$0.28
M-EQD-PLM Effects Pedal – EarthQuaker Devices, Plumes™, Small Signal Shredder
Plumes™ is a unique, all-analog approach to a classic tube-like overdrive circuit offering 3 different clipping voices, loads of headroom and almost three-dimensional clarity that will push your amp over the edge. The reimagined tone control is finely tuned to sculpt low end, clear top end, and focus midrange with blooming sustain.
$99.00
K-999 Effects Pedal Kit - MOD® Kits, The Saturator
The Saturator is an overdrive pedal kit that can cover a wide range of gain effects, transitioning smoothly from a massive clean boost to a warm and saturated distortion with the turn of a knob. The saturation is controlled with the "Soak" knob, which dials in the amount of symmetrical soft-clipping applied to the guitar signal. When fully counterclockwise , the signal is unaffected and clean. Rotating the knob clockwise will incrementally increase the soft-clipping, morphing from a clean signal through subtle-to-heavy saturated overdrive sounds and straight into distortion territory. The "Level" knob sets the overall volume of the clean or saturated output. Unity gain is at roughly 8 o'clock. With the "Soak" set to clean, rotating the "Level" knob clockwise will increase the level to upwards of 30dB.
$47.95
P-PUGT-TN-X Pickup - Gotoh, TL-Classic, Neck, Tele Style, Made In Japan
The TL-Classic neck is an authentic take on the tele neck pickup. With Alnico 5 rod magnets, vulcanized fiberboard flatwork, and a long skirted cover, the TL-Classic neck offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.
Starting at $35.05
Save 10%
Originally: $38.95
M-EQD-AR Effects Pedal – EarthQuaker Devices, Avalanche Run™, Stereo Reverb & Delay with Tap Tempo
The Avalanche Run is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in our precious Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that’s just the beginning...
$299.00
C-ETRX-25 Capacitor - 25V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.
Starting at $0.15
P-K385X Knob - Pointer, Large, Knurled, White Index Line
Colors Available:
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers.
$0.95
S-H348S-U-X Machine Screw - 3-48 x 1”, Phillips, Pan Head
Colors Available:
Original, made in USA, 3-48 x 1” machine screws. These premium screws are perfect for mounting humbucker pickups that need a shorter screw.
$0.31
Save 11%
Originally: $0.35
P-G107-BWB Pickguard - For '57 Strat®, 8 Hole, 3-Ply
Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:
  • 3-ply / 2.5mm thickness
  • 8 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
$10.25
P-SLG-187X-U-X Slug - 1215 Steel, 0.187" Diameter, for Humbucker Pickups
Colors Available:
Original, made in USA, steel slugs for making humbucker pickups. These premium slugs are made of 1215 steel. These parts are made using the same materials and processes as the most sought after vintage parts.
$0.36
Save 10%
Originally: $0.40
B-978 Tube Lore II, A Reference for Users and Collectors, 2nd Edition
The classic Ludwell Sibley book is now available in this wonderful second edition. Tube Lore II contains a wealth of knowledge and information on a wide variety of tube types. Any tube collector or radio aficionado will find the contents of this book to be an invaluable reference.
$29.95
P-T290S2Z Transformer - Hammond, Power, for Fender Sunn 2000
Power Transformer, 117 V, 60 Hz. Used in the Fender Sunn 2000, 120 Watts. Physically, parts were designed to look similar to original factory units (where possible). Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$258.18
G-889 Shirt - Black, Amplified Parts Speaker Logo, Men's Sizes
High quality black shirt featuring the Amplified Parts speaker logo printed on the front. Next Level Apparel CVC Crew shirt. Top of the line fabric that stands up to the consistent wear without sacrificing fit or feel. Made from a super soft cotton/polyester blend.
$19.95
P-QLF353 Op-Amp - LF353, Dual, Wide-Bandwidth, JFET Input, 8-Pin DIP
Dual wide-bandwidth LF353 opamps in an 8-pin DIP package. The LF353 offers a high input impedance and 3MHz bandwidth.
This LF353 device is a low-cost, high-speed, JFET input operational amplifier with very low input offset voltage. It requires low supply current yet maintains a large gain-bandwidth product and a fast slew rate. In addition, the matched high-voltage JFET input provides very low input bias and offset currents.
$0.34
M-EQD-ST Effects Pedal – EarthQuaker Devices, Swiss Things®, Pedalboard Reconciler
Swiss Things® combines two true-bypass Flexi-Switch® enabled effects loops, a Flexi-Switch® AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss. This is what you can do with it:
  • Use as many pedals as you’d like without tone-suck
  • Quickly and easily bypass or engage all of your effects with one click
  • Use Flexi-Switch® Technology with every pedal in your setup
  • Eliminate volume pedal tone-suck by using any expression pedal to control volume
  • Use multiple amps without phase issues, ground loops, or extra noise
  • Tidy up your rig, shorten cable runs, and reduce tone loss by keep
$249.00
P-PUGT-2X-X Pickup - Gotoh, HB-Classic, Humbucker, Made In Japan
The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.
Starting at $31.45
Save 10%
Originally: $34.95
C-EC80-50-20-20-350 Capacitor - CE Mfg., 350V, 80/50/20/20µF, Electrolytic, 2.5" Height
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
M-EQD-DM Effects Pedal – EarthQuaker Devices, Dispatch Master™, Digital Delay & Reverb
The Dispatch Master is a hi-fi digital Delay & Reverb Device that combines independent delay and reverb effects into one space-saving enclosure, so you can keep deep ambient echoes (or just a quick slapback) on speed-dial. The best-selling EarthQuaker Devices pedal just got bester [sic] with new Flexi-Switch® Technology! Want to dip into ambient delay and reverb sounds for just one note? Press and hold the footswitch for as long as you use the effect, release it when you’re finished, and resume your regularly scheduled dry sound. To use the Dispatch Master as a normal effects pedal, press the switch once to activate and again to bypass.
$199.00
C-ETR100-100 Capacitor - 100V, 100µF, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 100VDC.
$1.05
P-GTNN09 Nut - Plastic, for Electric Guitars
Plastic electric guitar nut.
$1.95
R-VTL5C1-P Optocoupler - Vactec, VTL5C1, Vactrol, New Old Stock
New old stock Vactec VTL5C1 vactrols from Perkin Elmer Optoelectronics. These premium vactrols are a great choice for use in phasers, compressors, tremolos, and synth modules such as low-pass gates. They are also used in switching circuits in amplifiers. Limited quantities are available.
$10.95
P-G106-X Pickguard - For Standard Strat®, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® Standard Strat® models. These pickguards have eleven mounting holes and are cut for the classic strat® configuration. Fits most American and Mexican Standard Stratocasters®. Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
Starting at $11.30
Don't see what you're looking for? Send us your product suggestions!