New Products

P-POL-540-U-X Polepiece - Fillister, 5-40 x 0.75”, 1018 Steel, USA
Colors Available:
Original, made in USA, fillister head screws for use as polepieces in pickups. These premium polepieces have a 5-40 threading with a 0.75” length.
Starting at $0.50
P-PUGT-2X-X Pickup - Gotoh, HB-Classic, Humbucker, Made In Japan
The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.
Starting at $34.95
P-COV-HNH-U-X Cover - Humbucker, No Holes, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.
Starting at $7.95
C-EC80-50-20-20-350 Capacitor - CE Mfg., 350V, 80/50/20/20µF, Electrolytic, 2.5" Height
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
P-BOB-H492P-U-SLU-X Bobbin - Humbucker, PAF, 49.2mm, Slug Side, Butyrate, USA
Colors Available:
Original, made in USA, PAF-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.
$2.75
C-ETR100-100 Capacitor - 100V, 100µF, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 100VDC.
$1.05
P-BAS-P90D-B-U Baseplate - P-90, Dog Ear, Bridge, 50mm, USA
Original, made in USA, dog ear P-90 frame with a 50mm spacing traditionally used in the bridge position. This premium baseplate is made of raw nickel silver.
$6.90
R-VTL5C1-P Optocoupler - Vactec, VTL5C1, Vactrol, New Old Stock
New old stock Vactec VTL5C1 vactrols from Perkin Elmer Optoelectronics. These premium vactrols are a great choice for use in phasers, compressors, tremolos, and synth modules such as low-pass gates. They are also used in switching circuits in amplifiers. Limited quantities are available.
$10.95
P-G108-AW Pickguard - For Tele, 5 Hole, Single Ply
Replacement pickguard for Tele guitars. These pickguards feature five mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity.
$10.25
P-COV-P90S-U-X Cover - P-90, Soap Bar, 50mm, Butyrate, USA
Colors Available:
Original, made in USA, covers for soap bar P-90 pickups. These premium P-90 covers are made of butyrate and have a 50mm spacing.
Starting at $10.85
P-RNG-MH-U-X Mounting Ring - Mini Humbucker / Firebird, USA
Colors Available:
Original, made in USA, mounting rings for mini humbucker and Firebird pickups. These premium metal mounting rings offer an elegant upgrade to the standard plastic rings.
Starting at $9.25
P-G104-X Pickguard - For '62 Strat®, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® '62 Strat® models. These pickguards have eleven mounting holes with one of the holes centered between the middle and neck pickups for compatibility with most American, Japanese, and Mexican '62 Stratocasters®.
Starting at $10.25
P-H1092 Corner - Marshall, Black Plastic, 3-Hole, Front Left / Right
Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
$9.00
On Backorder
G-891 Shirt - Silk Gray, Amplified Parts Speaker Logo, Men's Sizes
High quality silk gray shirt featuring the Amplified Parts speaker logo printed on the front. Next Level Apparel CVC Crew shirt. Top of the line fabric that stands up to the consistent wear without sacrificing fit or feel. Made from a super soft cotton/polyester blend.
$19.95
P-QLM324 Op-Amp - LM324, Quad, Low-Power, 14-Pin DIP
Quad low-power opamps in an 14-pin DIP package. The LM324 offers a 1MHz bandwidth and can be powered from a single supply.
$0.18
G-886 Shirt - Indigo, Amplified Parts Pick Logo, Men's Sizes
High quality indigo shirt featuring the Amplified Parts pick logo printed on the front. Next Level Apparel CVC Crew shirt. Top of the line fabric that stands up to the consistent wear without sacrificing fit or feel. Made from a super soft cotton/polyester blend.
$19.95
P-QPT2399 Integrated Circuit - PT2399, Echo / Delay
PT2399 echo/delay chip used in many DIY and commercial pedals. The PT2399 is in a DIP 16 package. Minimal external components are required for use and delay time is set with resistance.
$0.78
P-COV-TN50-U-X Cover - Tele, Neck, 1950s Style, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for 1950s, vintage-style, tele neck pickups. These premium tele covers are made of nickel silver and feature the long skirt associated with ‘50s era pickups.
Starting at $7.95
P-PUGT-1X-X Pickup - Gotoh, ST-Classic, Stratocaster Style, Made In Japan
The ST-Classic is an amazing homage to the 1960’s strat pickup. With staggered Alnico 5 rod magnets, vulcanized fiberboard flatwork, and enamel coated wire, the ST-Classic offers a truly vintage sound. These pickups are wax potted for sonic stability, feature a bevel on the magnets, and use cloth pushback wire for an easy and clean install. A cover, mounting screws and springs are included. Made in Japan.
$27.95
P-COV-H492P-U-X Cover - Humbucker, PAF, 49.2mm, Nickel Silver, USA
Colors Available:
Original, made in USA, PAF-correct covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 49.2mm spacing.
Starting at $13.95
C-ETRX-160 Capacitor - 160V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 160VDC.
Starting at $0.42
P-BAS-P90S-U Baseplate - P-90, Soap Bar, 50mm, USA
Original, made in USA, soap bar P-90. This premium baseplate has a 50mm spacing is made of raw nickel silver.
$6.90
P-H1431-10X Cover Plate - Hammond, Steel, 8" x 4", 20 Gauge
Colors Available:
Special Order Item
Hammond Mfg 20 gauge steel 8” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$5.06
Out of Stock
P-K385X Knob - Pointer, Large, Knurled, White Index Line
Colors Available:
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers.
$0.95
Don't see what you're looking for? Send us your product suggestions!