 | Screw - Pickguard, Package of 100 (Package of 100)Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.
- 7/16” threaded portion
- Available in Black, Gold, Nickel, and Chrome plating
- Package of 100
| Starting at $5.25 | Click to read more |
 | Kit - BusBoard, Junior Genius Blinky Lights Kit Junior Genius Kits are built for experimentation, learning and fun! Experience the joy of seeing your first LED light up. The Blinky Lights Kit leads you through 10 core activities, from a simple LED circuit up to more advanced transistor LED blinky light circuits, using standard parts on a real-world breadboard.
Learn about voltage and current by using LEDs, resistors, capacitors and transistors. You'll be able to build circuits using a schematic diagram, and there's plenty of help to get you there. Simple examples make it easy to grasp the basics and 'What's Happening' and 'Things To Try' sections encourage you to dig deeper.
You will get valuable assembly and troubleshooting experience as you learn to use a great experimentation tool, the solderless breadboard. Real hands-on experience means greater educational value.
This next-generation science kit doesn’t seal the parts into simplified plastic blocks. | $23.95 | Click to read more |
 | Kit - Power All System Basic, For Effects PedalsThe Power-All PA-9 Digital Power Supply is the world’s first 2000 mA, single outlet power supply designed specifically for guitar effect users. Don’t waste money on batteries or take up valuable space with multiple “wall wart” adaptors or power bricks – the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet! The Power-All provides 9 volts DC at 2000 milliamps – more than enough current to power dozens of effect pedals, including up to four Line 6 Modelers! The Power-All’s special circuit design offers the lowest noise floor of any digital power supply on the market. The PA-9 now comes with a ferrite-core filter built onto its output cable to further reduce noise and hum.
| $24.95 | Click to read more |
 | Switch - Footswitch, SPST, Off-(On), Solder Lugs, Soft SwitchSPST(single pole,single throw) normally open, Off-(On) momentary foot switch. Solder lugs, soft switching.
These high quality switches are great for upgrading the footswitch in relay based pedals as well as tap tempo applications.
Depressing the switch shorts the lugs together and when the switch is released it returns to it’s non connected state with no click.
- SPST momentary switch
- Soft, silent switching with no click
- Normally open operation
- Solder lugs
- Nuts and washer included
Note: Off-(On) switches may sometimes be referred to as Off-None-(On). | $2.50 | Click to read more |
 | Bias Master™ - TAD, with 4 Noval Probes BIASMASTER System BM4-EL84 Measures BIAS current of any EL84 etc. in your amp. Includes 4 noval probes (2x S-TBMA2-EL84) and english/german operation manual.
The BiasMaster™ allows to monitor the bias current safely and easily. While adjusting the Bias control pot of your amp the BiasMaster™ does show the actual result. This lets you set and evaluate all reasonable biasing range your amp and tubes offers to find and set your personal perfect choice.
The Bias setting has a dramatic impact on the amp's response, break-up and dynamic character. | $195.00 | Click to read more |
 | ProtoBoard - Fits 1590B, 1 sided, 2-hole stripsPrototyping circuit board (PCB) designed to fit the Hammond 1590B die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590B enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190-X) Features:
- Single-sided high-quality FR4 glass-epoxy circuit board.
- Convenient 2-hole pattern provides an easy way to connect parts.
- 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
- 0.042" holes are drilled on 0.1" (2.54mm) centers. 2 mounting holes.
- PCB Size 2.05 x 4.05 in (52.1 x 102.9 mm)
| $3.40 | Click to read more |
 | Bias Master™ - TAD, with 4 Octal Probes BIASMASTER System BM4 Measures BIAS current of any 6L6GC, 6550, EL34, 6V6GT, 5881, KT66, KT88, KT90, KT100, KT120, 7027A etc. in your amp. Includes 4 octal probes (2x S-TBMA2) and english/german operation manual.
The BiasMaster™ allows to monitor the bias current savely and easily. While adjusting the Bias control pot of your amp the BiasMaster™ does show the actual result. | $195.00 | Click to read more |
 | Resistors - 10W, Wirewound, PowerMultiple Options Available Wire Wound power resistors are made by wrapping a length of high resistance wire onto an insulating form. Ceramic flame retardant package. Exceptionally small, sturdy and reliable.
- 10 watt
- ± 5% tolerance
- -55° C to 155° C operating range (derated over 70° C)
- 350 V working, 700 V overload
- Excellent moisture resistance
- Stable performance in diverse conditions
- Sealed with special cement
- High temperature stability
- 1.93" long x .39" square
| $1.56 | Click to read more |
 | Resistors - .5W, Carbon Film (Package of 5)Multiple Options Available Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Sold in multiples of 5. Pricing is per pack of five (ie, entering 2 equals a total of 10 resistors)
- ½" watt - 350V working, 700V overload, 0.4" long by 0.14" dia.
| $1.32 | Click to read more |
 | Potentiometer - CTS, Audio, Knurled Shaft, .375" Bushing, DPDT Multiple Options Available Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications. Common uses are as follows:
- 500K pots are commonly used when wiring humbuckers.
- 250K pots are commonly used when wiring single-coil pickups
- 500K long-shaft pots are commonly used when wiring carved top solid body guitars
| $6.95 | Click to read more |
480.296.0890