You are here

New Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View


(23 pages)
P-HCH05Chassis - Fender Style 5F1 Tweed Champ

Fender® style Tweed Champ™(5F1) chassis.

  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 8-3/4" x 4-1/8" x 2 5/8"

Click to read more
S-G484Tolex - Vox style Fawn, 54" Wide

Vox Style Fawn Tolex. Designed to closely resemble the original fawn tolex used on Vox amps.

  • Sold per yard.
  • 54" wide.

Due to the constraints of mechanical reproduction, colors may not be 100% accurate. Product will be in one continuous segment, cut to the ordered length. Please note that because grill cloth/tolex needs to be cut, we cannot accept any returns on these items. Small tolex samples are available for evaluation at $1.00 each. The part number is S-GSAMPLE. Save when you order a packet of cabinet covering/tolex samples, part number S-GSG2.

Click to read more
C-G-100Capacitor - Orange Drop, 100V, Polyester
Multiple Options Available

Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:

  • Non- inductively wound polyester film/foil construction
  • Radial lead
  • 10% tolerance
  • 100v voltage rating
  • Rated for 85°C operation
  • Tinned copper-clad steel leads

Starting at $1.65
Click to read more
T-12BH7-A-JJ12BH7-A - JJ Electronics

The JJ Electronic 12BH7-A preamp tube is a great choice for Ampeg SVT amps and the Blackstar HT-5 plus others. A favorite in many hi-fi applications.

Click to read more
F-ZSFuse - Slo-Blo, 0.25" x 1.25" (Package of 5)
Multiple Options Available

Protect your expensive investment or hobby with inexpensive fuses. Fits fuse block S-H259 and fuse holder S-H201.

  • Rated at 250V
  • Measures 1.25"(31.4mm) in length, 0.25"(6.3mm) in diameter
  • Slow-Blow
  • Package of 5

Starting at $2.75
Click to read more
P-A-G12-NEOSpeaker - Celestion, G12 Neo Creamback, 12"
Multiple Options Available

The Neo Creamback is every ounce a Classic Celestion, delivering all the magical tone you’d get from a traditional Creamback. The difference is, it’s built with a neodymium magnet: making this speaker around half the weight of a traditional ceramic magnet speaker.Celestion’s engineers have developed a new and innovative way to better harness the mighty forces of the neodymium magnet, enabling us to create a guitar speaker that can deliver authentic Creamback tone with ease, while preserving the benefit of neodymium’s much lighter weight.You still get the low end punch, warm, vocal midrange and sweet refined highs the Creamback is famous for: push it hard and enjoy the ‘race-car growl’ that sets pulses racing.

Click to read more
S-F504XAdhesive - Bob Smith Industries, Maxi-Cure Extra Thick Cyanoacrylate
Multiple Options Available

Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)

  • Extra thick, gap filling consistency
  • 10-25 second cure time
  • For looser fitting applications where a low viscosity glue is required
  • Available in 1oz. and 2oz. sizes

WARNING*: These products are eye and respiratory irritants. Product can bond skin instantly.

Starting at $5.50
Click to read more
S-F502XAdhesive - Bob Smith Industries, Insta-Cure + Gap Filling
Multiple Options Available

Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!

Starting at $5.50
Click to read more
P-PC-BB400BreadBoard - Solderless, 400 point pattern

Solderless (plug-in) breadboard with 400 connection tie-points (i.e. 400 wire insertion holes) and 4 power rails. Solderless breadboards are great for building and testing new circuits because parts can be easily inserted and removed making them completely re-usable. This breadboard has a 300 tie-point IC-circuit area plus four 25 tie-point power rails. The housing is made of white ABS plastic, with a printed legend giving numbers and letters for columns and rows. The internal contacts are phosphor bronze with a plated nickel finish and a peelable adhesive tape backing is provided for attaching it to a surface. Be sure to check out the Zipwire™ jumper wire kits for use with this breadboard.

Click to read more
P-PC-SB404BreadBoard - Solderable PCB, 400 point pattern
Solderable PC BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. This breadboard has the same pattern as a standard 400 connection point solderless plug-in breadboard which has a standard 5-hole strip for each IC pin, just like solderless breadboards. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts.
The board has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used as well as a top side silkscreen to position components. Four mounting holes allow your projects to be secured.
Click to read more


(23 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - New Products