New Products

T-E83CC-JJ Vacuum Tube - E83CC Frame Grid, JJ Electronics
Alternative to the 12AX7 or ECC83. The JJ Electronic E83CC is a high quality dual triode that rivals the NOS version of this tube. The E83CC was originally designed as an audio specific dual triode with very low noise and microphonics. The JJ E83CC stays true to the original design with the signature thick frame grid and boxed plate. The rigid frame allows for tighter tolerances and closer construction which results in lower noise and increased stability. The JJ Electronic E83CC is a great choice for high fidelity amplifiers as well as guitar amps and studio equipment. The E83CC has the same pinout and amplification factor as a standard 12AX7 and can be used in any 12AX7 or ECC83 position. Guitarist Description: This frame grid tube has an incredibly rich yet balanced tone. The E83CC works well for clean sounds but also breaks up with a satisfying warmth and plenty of articulation.
$21.95
P-BAS-P90D-B-U Baseplate - P-90, Dog Ear, Bridge, 50mm, USA
Original, made in USA, dog ear P-90 frame with a 50mm spacing traditionally used in the bridge position. This premium baseplate is made of raw nickel silver.
$6.90
R-VTL5C1-P Optocoupler - Vactec, VTL5C1, Vactrol, New Old Stock
New old stock Vactec VTL5C1 vactrols from Perkin Elmer Optoelectronics. These premium vactrols are a great choice for use in phasers, compressors, tremolos, and synth modules such as low-pass gates. They are also used in switching circuits in amplifiers. Limited quantities are available.
$10.95
P-G108-AW Pickguard - For Tele, 5 Hole, Single Ply
Replacement pickguard for Tele guitars. These pickguards feature five mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity.
$10.25
P-COV-P90S-U-X Cover - P-90, Soap Bar, 50mm, Butyrate, USA
Colors Available:
Original, made in USA, covers for soap bar P-90 pickups. These premium P-90 covers are made of butyrate and have a 50mm spacing.
Starting at $10.85
P-RNG-MH-U-X Mounting Ring - Mini Humbucker / Firebird, USA
Colors Available:
Original, made in USA, mounting rings for mini humbucker and Firebird pickups. These premium metal mounting rings offer an elegant upgrade to the standard plastic rings.
Starting at $9.25
P-G104-X Pickguard - For '62 Strat®, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® '62 Strat® models. These pickguards have eleven mounting holes with one of the holes centered between the middle and neck pickups for compatibility with most American, Japanese, and Mexican '62 Stratocasters®.
Starting at $10.25
P-H1092 Corner - Marshall, Black Plastic, 3-Hole, Front Left / Right
Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
$9.00
On Backorder
G-891 Shirt - Silk Gray, Amplified Parts Speaker Logo, Men's Sizes
High quality silk gray shirt featuring the Amplified Parts speaker logo printed on the front. Next Level Apparel CVC Crew shirt. Top of the line fabric that stands up to the consistent wear without sacrificing fit or feel. Made from a super soft cotton/polyester blend.
$19.95
P-QLM324 Op-Amp - LM324, Quad, Low-Power, 14-Pin DIP
Quad low-power opamps in an 14-pin DIP package. The LM324 offers a 1MHz bandwidth and can be powered from a single supply.
$0.18
G-886 Shirt - Indigo, Amplified Parts Pick Logo, Men's Sizes
High quality indigo shirt featuring the Amplified Parts pick logo printed on the front. Next Level Apparel CVC Crew shirt. Top of the line fabric that stands up to the consistent wear without sacrificing fit or feel. Made from a super soft cotton/polyester blend.
$19.95
P-QPT2399 Integrated Circuit - PT2399, Echo / Delay
PT2399 echo/delay chip used in many DIY and commercial pedals. The PT2399 is in a DIP 16 package. Minimal external components are required for use and delay time is set with resistance.
$0.78
P-COV-TN50-U-X Cover - Tele, Neck, 1950s Style, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for 1950s, vintage-style, tele neck pickups. These premium tele covers are made of nickel silver and feature the long skirt associated with ‘50s era pickups.
Starting at $7.95
P-PUGT-1X-X Pickup - Gotoh, ST-Classic, Stratocaster Style, Made In Japan
The ST-Classic is an amazing homage to the 1960’s strat pickup. With staggered Alnico 5 rod magnets, vulcanized fiberboard flatwork, and enamel coated wire, the ST-Classic offers a truly vintage sound. These pickups are wax potted for sonic stability, feature a bevel on the magnets, and use cloth pushback wire for an easy and clean install. A cover, mounting screws and springs are included. Made in Japan.
$27.95
P-COV-H492P-U-X Cover - Humbucker, PAF, 49.2mm, Nickel Silver, USA
Colors Available:
Original, made in USA, PAF-correct covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 49.2mm spacing.
Starting at $13.95
C-ETRX-160 Capacitor - 160V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 160VDC.
Starting at $0.42
P-BAS-P90S-U Baseplate - P-90, Soap Bar, 50mm, USA
Original, made in USA, soap bar P-90. This premium baseplate has a 50mm spacing is made of raw nickel silver.
$6.90
P-H1431-10X Cover Plate - Hammond, Steel, 8" x 4", 20 Gauge
Colors Available:
Special Order Item
Hammond Mfg 20 gauge steel 8” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$5.06
Out of Stock
P-K385X Knob - Pointer, Large, Knurled, White Index Line
Colors Available:
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers.
$0.95
P-BAS-H492P-U Baseplate - Humbucker, 49.2mm, PAF, USA
Original, made in USA, PAF-correct humbucker frame with long legs. This premium baseplate has a 49.2mm spacing and is made of raw nickel silver.
$5.95
S-H212-U-BR Wood Screw - #2 x 1/2”, Phillips, Round Head, Brass
Original, made in USA, #2 x ½” wood screws. These premium screws are made of raw brass and are perfect for mounting bobbins to baseplates. These are reproductions of the PAF style mounting screws.
$0.25
P-G107-BWB Pickguard - For '57 Strat®, 8 Hole, 3-Ply
Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:
  • 3-ply / 2.5mm thickness
  • 8 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
$10.25
P-PUF74 Pickup - Fender®, Pure Vintage ’65 Strat®, Set of 3
Package of 3
Set of three single coil Stratocaster® pickups built to the same specifications as mid-1960s strat® pickups. These pickups feature period correct waxed, push-back, cloth wiring as well as a fiberboard bobbin construction. The staggered pole pieces use vintage style alnico 5 magnets for a balanced sound and focused dynamics.
$130.00
P-A-F12-X200-8 Speaker - Celestion, 12", F12-X200, 200W, 8Ω
The F12-X200 is Celestion’s answer to the growing trend of full-range flat-response speakers. The F12-X200 provides a massive 200W power rating. Celestion’s decades of experience in speaker construction shines in this unique design that offers neutral voicing while maintaining the feel and response of a Celestion guitar speaker.
$149.00
Don't see what you're looking for? Send us your product suggestions!