New Products

P-BAS-H492-CH-SL-U Baseplate - Humbucker, 49.2mm, Center Hole, Short Leg, USA
Original, made in USA, humbucker frame with center holes for making single coil pickups in a humbucker footprint. This premium baseplate has a 49.2mm spacing and is made of raw nickel silver.
$6.25
P-COV-P90S-U-X Cover - P-90, Soap Bar, 50mm, Butyrate, USA
Colors Available:
Original, made in USA, covers for soap bar P-90 pickups. These premium P-90 covers are made of butyrate and have a 50mm spacing.
Starting at $10.85
P-COV-HO-U-X Cover - Humbucker, Open, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.
Starting at $7.95
P-COV-H50-U-X Cover - Humbucker, 50mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Starting at $5.95
P-PUF74 Pickup - Fender®, Pure Vintage ’65 Strat®, Set of 3
Package of 3
Set of three single coil Stratocaster® pickups built to the same specifications as mid-1960s strat® pickups. These pickups feature period correct waxed, push-back, cloth wiring as well as a fiberboard bobbin construction. The staggered pole pieces use vintage style alnico 5 magnets for a balanced sound and focused dynamics.
$130.00
On Backorder
P-H9800 Foot - Synthetic Rubber, 0.51" Height x 1.60" Diameter
Package of 4
Set of four, black, synthetic rubber feet. Molded from one piece with a textured no-slip surface.
$0.80
P-H1092 Corner - Marshall, Black Plastic, 3-Hole, Front Left / Right
Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
$9.00
P-GKLU-KAB110M Anchor Bushings - Kluson, Metric Thread, Zinc, Set of 2
Pair of standard stop bar anchor bushings for stud mounts with fine knurling and fits most guitars using a 0.986” body depth for the anchors. Made from zinc. Pairs with P-GKLU-KLP1099X studs. Studs sold separately.
$5.95
T-5Y3GT-RCA Vacuum Tube - RCA 5Y3GT, Rectifier, Full Wave
Also known by US military identifier VT-197A. The 5Y3GT is a filamentary twin-diode designed for full-wave rectifier operation in power supplies that have d-c output current requirements up to approximately 125 milliamperes. RCA brand.
$34.90
P-GKLU-HM4-C Bridge - Kluson®, High Mass, 4 String, Brass Saddles
The Kluson® High Mass bridge is a heavy weighted block-style bass bridge for increased sustain, tighter low end, and tonal clarity. The base plate is a solid piece of plated zinc and the saddles are plated brass for additional chime.
$56.00
P-PUMC-SSX-ON Pickup - McNelly, Stagger Swagger, Open Nickel
This McNelly Stagger Swagger pickup features an open nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.
$145.00
P-PUMC-SSX-N Pickup - McNelly, Stagger Swagger, Nickel
This McNelly Stagger Swagger pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.
$145.00
P-PUMC-DKN-ON Pickup - McNelly, Tele, Duckling, Neck, Open Nickel
“This is for Tele players who have a thing for the wicked vibe of a Strat neck pickup. The rich deep lows to the clear and glassy chime is all there, but squeezed into a standard Tele size.–McNelly Pickups
$110.00
P-PUMC-CCX-N Pickup - McNelly, Humbucker, Cornucopia, Nickel
This McNelly Cornucopia pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.
$130.00
P-PUMC-A5PB-X Pickup - McNelly, Tele, A5 Signature Plus
“The Alnico 5 Signature is higher output than traditional vintage styles. Tight bass, present mids, and a conveniently subdued treble. It's there if you want it, but you're in control. If I were Leo, this is what I would have made in 1950.” –McNelly Pickups
$95.00
P-GBV5-ST-X Vibrato - Bigsby Vibramate Set, B5 / V5-ST
Colors Available:
This is a complete set that includes an original Bigsby B5 and a matching Vibramate V5-ST Short Tail for use with most traditional style guitars that have a tune-o-matic style bridge and a stop-tailpiece.
Starting at $179.95
P-GBV7-X-X Vibrato - Bigsby Vibramate Set, B7 / V7-335 for Arch Top
Color / Spacings Available:
This is a complete set that includes an original Bigsby B7 and a matching Vibramate V7-335 for use with most standard 335 sized arch top guitars with stop tailpiece and tune-o-matic bridge.
Starting at $244.90
P-GBV7-LP-X Vibrato - Bigsby Vibramate Set, B7 / V7 Les Paul
Colors Available:
This is a complete set that includes an original Bigsby B5 and a matching Vibramate V7-LP for use with most standard carved top Les Paul® guitars with a stop tailpiece and tune-o-matic bridge.
Starting at $219.90
P-GBV5-J-X Vibrato - Bigsby Vibramate Set, B5 / V5 JAM
Colors Available:
This is a complete set that includes an original Bigsby B5 and a matching Vibramate V5-JAM for use with most standard Jazzmaster or Jaguar guitars with the stock vibrato bridge.
Starting at $175.95
P-GBV5-X Vibrato - Bigsby Vibramate Set, B5 / V5, Aluminum
Colors Available:
This is a complete set that includes an original Bigsby B5 and a matching Vibramate V5 for use with most traditional style guitars that have a tune-o-matic style bridge and a stop-tailpiece.
Starting at $179.95
P-GBV5-TS Vibrato - Bigsby Vibramate Set, for Tele, B5 / V5-TEAS
This is a complete set that includes an original aluminum Bigsby B5 and a matching silver-color Vibramate V5-TEAS for use with Telecaster guitars.
$281.95
P-GBV5-T Vibrato - Bigsby Vibramate Set, for Tele, B5 / V5-TEV Stage II
This is a complete set that includes an original aluminum Bigsby B5 and a matching silver-color Vibramate V5-TEV Stage II for use with Telecaster guitars.
$209.95
S-H8FW Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
Don't see what you're looking for? Send us your product suggestions!