New Products

High quality chicken head knobs that resemble the style of knob found on the Zonk Machine II and Shatterbox fuzz pedals. The Zonk chicken head knob has a contoured center band with a textured finish. The outer dome has a shiny finish offering a visual contrast. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.75 in.
• Length: 1.065 in.
• Fits ¼" shaft with set screw

PCB and parts kit for the MKIII / MKIV fuzz. This kit includes all of the resistors, capacitors, diodes, potentiometers, and terminal pins used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.

High quality spiral shielded wire with a small outer diameter of 0.138 inches. Both the core wire and spiral shield are tinned copper so soldering is easy. The gray outside jacket and blue core insulation have a similar appearance to the type of wire used in vintage pedals such as the Supa Fuzz, Tone Bender, and Zonk Machine. The core wire is 7 strand 24AWG.

High quality radial capacitors rated at 400V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features

• Polyester film dielectric
• Vacuum deposited aluminum electrodes
• Wound mono construction
• Flame retardant epoxy material (UL-class 94 V-0)
• Tinned wire radial leads
• Performance Grade 1 (long life)
• ±10% tolerance
• Rated 400VDC

Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400

The PT-5042-00 is a great option to upgrade the nut on your Fender style electric guitar (or a guitar with similar specs). It is pre-slotted for a quick and simple install. It is 3/16" tall so make sure that is enough height for your guitar. Dimensions:

• Length - 1.652 in. (41.98mm)
• Width - 0.126 in. (3.22mm)
• Height - 0.196 in. (4.98mm)
• E to E - 1.388 in. (35.25mm)
• Radius - 12 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-6. For a similar nut that works on curved and flat Fender style necks, see P-GNUT-TUSQ-EPS-1XL-X.

High quality radial capacitors rated at 100V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features

• Polyester film dielectric
• Vacuum deposited aluminum electrodes
• Wound mono construction
• Flame retardant epoxy material (UL-class 94 V-0)
• Tinned wire radial leads
• Performance Grade 1 (long life)
• ±10% tolerance
• Rated 100VDC

Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400

The model 9332 is a great option to replace or upgrade the saddle on your acoustic guitar. It is a 3/32" (0.096") thick slab and can be used to fabricate just about anything. It is a great option for someone who wants to custom shape a new saddle. A lot of the work is already done for you. Dimensions:

• Length - 4.007 in. (101.77mm)
• Width - 0.096 in. (2.45mm)
• Height - 0.501 in. (12.73mm)

The model 9125 is a great option to replace or upgrade the saddle on your acoustic guitar. It is a 1/8" thick slab that you can fabricate just about anything from. It is a great option for someone who wants to custom shape a new saddle. A lot of the work is already done for you Dimensions:

• Length - 4.009 in. (101.83mm)
• Width - 0.128 in. (3.27mm)
• Height - 0.506 in. (12.85mm)

The 4025-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a ¼" thick slab of TUSQ XL. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.25 in. (6.35mm)
• Height - 0.437 in. (11.1mm)

The PRL-8341 are a right-handed set of Locking RATIO® Calibrated Machine Heads for electric guitars that use 3 x 3 tuners, such as Gibson style and PRS style guitars. A great upgrade over single gear machine heads, such as Grover, Schaller, Sperzel, Kluson, etc. This set has keystone style knobs. The tuners have a two pin casing that can be used as is, or with Graphtech’s Patented InvisoMatch Mounting Plates. 4 different sets of InvisoMatch mounting plates in brushed aluminum are included to make installation on most guitars fast and accurate by using your existing screw mounting holes. RATIO® is Graphtech’s patented gear technology. RATIO® Calibrated Machine Heads incorporate different string gauges into the tuning equation.

• From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.

Graphtech balanced the gear ratios to each string simplifying the tuning process. With RATIO®, a half turn is a semitone.

The 6010-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made before 2014. It is pre-slotted to make for a quick and easy install. The P-GNUT-TUSQ-EPS-4XL-X (post-2014) is slightly taller than this nut, when in doubt, choose the 6011, as you can always sand the bottom of the nut to adjust it lower. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.714 in. (43.53mm)
• Width - 0.185 in. (4.71mm)
• Height - 0.369 in. (9.37mm)
• E to E - 1.412 in. (35.87mm)
• Radius - 12 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-3.

The 1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.554 in. (39.47mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.187 in. (4.75mm)
• E to G - 1.223 in. (31.06mm)
• Radius - 7.25 in.

PCB and parts kit for the HS Treble Booster. This is based on the more common silicon version that used a 2N4061 transistor. This kit includes all of the resistors, and capacitors used on the included circuit board. A 2N4061 transistor is included. In addition to the PCB parts, a footswitch, jacks, battery snap, and ground lug are all included in this parts kit.

High quality radial capacitors rated at 250V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features

• Polyester film dielectric
• Vacuum deposited aluminum electrodes
• Wound mono construction
• Flame retardant epoxy material (UL-class 94 V-0)
• Tinned wire radial leads
• Performance Grade 1 (long life)
• ±10% tolerance
• Rated 250VDC

Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400

The 8501 model is the perfect option to upgrade or replace the existing saddles on your Gibson Nashville Tune-O-Matic bridge dated after 2000. It will also fit in a TonePros TP6 bridge and any Tune-O-Matic bridges marked PW on the underside. These are the saddles Graphtech loads into our ResoMax NV2 Bridges and bridges with API stamped on the bottom! They are a drop-in replacement set to make for an easy install. Please note: engineered for maximum vibration transfer, TUSQ saddles for electric guitars will add rich bell-like highs and big open lows. Switching to TUSQ Tune-O-Matic saddles will add some "spank" to your tone. String Saver saddles are made with a unique combination of materials made to enhance tone and dramatically reduce string breakage.

The PRL-8721 are a right-handed set of Locking RATIO® Calibrated Machine Heads for electric guitars that use 6-in-line tuners. This set has mini Schaller-style knobs. The tuners have a two pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates. 4 different sets of InvisoMatch mounting plates in brushed aluminum are included to make installation on most guitars fast and accurate by using your existing screw mounting holes. RATIO® is Graphtech’s patented gear technology. RATIO® Calibrated Machine Heads incorporate different string gauges into the tuning equation.

• From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.

Graphtech balanced the gear ratios to each string simplifying the tuning process. With RATIO®, a half turn is a semitone. Every string reacts the same to any tuning adjustment.

The PRL-8731 are a right-handed set of Locking RATIO® Calibrated Machine Heads for electric guitars that use 6-in-line tuners. This set has oval style knobs. The tuners have a two pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates. 4 different sets of InvisoMatch mounting plates in brushed aluminum are included to make installation on most guitars fast and accurate by using your existing screw mounting holes. RATIO® is Graphtech’s patented gear technology. RATIO® Calibrated Machine Heads incorporate different string gauges into the tuning equation.

• From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.

Graphtech balanced the gear ratios to each string simplifying the tuning process. With RATIO®, a half turn is a semitone. Every string reacts the same to any tuning adjustment.

The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16” thick slab of TUSQ XL. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.187 in. (4.75mm)
• Height - 0.437 in. (11.1mm)

The 5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to its ingenious design. The 5000-00 nuts have a 9.5 in. radius This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.687 in. (42.85mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.198 in. (5.03mm)
• E to E - 1.39 in. (35.31mm)
• Radius - 9.5 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-1.

The 6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.730 in. (43.94mm)
• Width - 0.243 in. (6.16mm)
• Height - 0.357 in. (9.08mm)
• E to E - 1.344 in. (34.14mm)
• Radius - 15 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-5.

The 1204-00 is the perfect option to upgrade the nut on your Fender Precision style Bass guitar. It is pre-slotted making installation quick and simple. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.65 in. (41.91mm)
• Width - 0.125 in. (3.17mm)
• Height - 0.187 in. (4.75mm)
• E to G - 1.25 in. (31.75mm)
• Radius - 7.25 in.

Slotted dress nut for ⅜”-32 threaded bushing such as standard Switchcraft ¼” jacks and CTS potentiometers. These plated brass nuts add a sleek look to any amplifier, pedal or guitar. This style of nut has a similar look to slotted round nuts found on plexi Marshall amps.

Plexi style pilot lights that operate on 120VAC. These lights match the style used on many vintage Marshall amplifiers. The lights use a neon bulb with an internal current limiting resistor so no external circuitry is required for use. The mounting diameter hole is 0.380” (9.65mm). Includes an internal tooth lock washer and hex nut.

High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.