Maintenance Products

S-C10-1762 Liquid Tape - GC Electronics, Insulating Coating, 2 oz
Heavy black coating used as insulating tape in applications where tape cannot be used.
Insulating Coating is an air-dry, synthetic rubber coating that can be easily applied by spraying, brushing, or dipping. Insulating Coating resists moistures, acids, abrasion, weathering, electrical shock, skidding/slipping, and corrosion. Coats give a comfortable, controlled, color-coded grip to all types of tools, lawn and garden, mechanical, electrical, woodworking, masonry.
  • Covers 30 square feet per gallon at 15 mils
  • Cured temperature use range -30 to 200F
  • Tensile strength: 3,7540 psi
  • Dielectric Strength: 1,400 V/Mil
$9.95
S-C10-302 Cement - GC Electronics, Service Cement
A quick-drying, waterproof clear adhesive which forms a strong, hard, water and vibration-resistant bond with minimal shrinkage. Ideal for speaker repairs and bonding semi-porus materials to each other or to metals, plastics, etc. 2 oz. bottle. Can be used as a glue for small speaker cone repairs.
$8.95
S-C10-3702 Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
$9.85
S-C10-4702 Corona Dope - GC Electronics, lacquer coating, 2 oz.
Corona Dope is useful for insulating components, circuits and assemblies. It has high dielectric strength and is especially useful where high voltages are involved. Also has excellent arc and corona resisting properties and protects surfaces against moisture. Cures in 20 minutes at room temperature.
  • Color: Black
  • Specific Gravity: 0.9
  • Dielectric Strength: 3800 V/Mil
  • Softening Point: 180°C to 190°C
  • Temperature Range: Up to 340°F
  • Viscosity @ 25°C: 220 cps
$9.98
S-C6500 Maintenance Kit - Dunlop, Guitar care products
Package of 5
Everything you need to do a deep clean and polish on your guitar’s fingerboard, finish, and strings.The Dunlop System 65 Guitar Maintenance Kit will help you keep your guitar in top notch condition. Set includes the following:
  • Bodygloss 65 Cream of Carnauba polishes, protects, and beautifies
  • Formula No. 65 cleaner/polish shines up your guitar’s body while eliminating any built up grime.
  • Ultraglide 65 String Cleaner/Conditioner cleans your strings and extends string life while eliminating string squeaks.
  • Fingerboard 01 Cleaner and Prep dissolves away unwanted dirt and residue from your fingerboard
  • Fingerboard 02 Deep Conditioner replenishes your fingerboard with natural protective oils.
  • Also includes 2 microfiber cleaning cloths, a micro fine fret polishing cloth, and a complete step-by-step guitar guide

Give your guitar some top level love!
$24.95
S-C6504 Tech Kit - Dunlop, Guitar care products
Package of 3
Everything you need to properly clean and maintain your guitar’s fingerboard, finish, and strings! The Dunlop System 65 Guitar Tech Kit will help you keep your guitar feeling great and shining like a new nickel. Set includes the following:
  • Formula No. 65 cleaner/polish shines up your guitar’s body while eliminating any built up grime.
  • Fretboard 65 Ultimate Lemon Oil cleans and conditions your fretboard to protect against drying and cracking.
  • Ultraglide 65 String Cleaner/Conditioner cleans your strings and extends string life while eliminating string squeaks.
  • Also includes 2 microfiber cleaning cloths, a micro fine fret polishing cloth, and a string winder

Step up and give that grimy guitar a fresh start!
$19.95
S-CK-CK44-G Membrane repair - Caig, Caikote 44 carbon coating
Conductive Carbon Coating for most surfaces (rubber, epoxy, glass, plastic). It is ideal for repairing membrane buttons, keyboard buttons, and other carbon based surfaces. It may also be used as a coating for shielding (EMI) of electronics. Similar products on the market are more expensive, and have multiple containers requiring mixing prior to application. The CaiKoteTM 44 is applied in one step, allowed to dry and is ready for service.
$9.95
S-CK-DG100L-2DB DeoxIT® Gold - Caig, Electronic Maintenance Kit
Package of 2
Chemically improves ALL metal to metal connections and contacts for clearer audio, clearer video, and reliable data. Includes: DeoxIT® brush applicator (#D100L-2DB), (Applications = 500 ± brush strokes, 10mm long) DeoxIT® GOLD brush applicator (#G100L-2DB), (Applications = 500 ± brush strokes, 10mm long) Lint-free swabs, brushes and cloths
$31.45
S-CMP16 Travel Care Kit - Lizard Spit, Guitar Maintenance
Package of 3
The Lizard Spit Travel Care Kit is the perfect set of maintenance products to throw in your case to keep your instrument looking and playing great. The kit includes a soft microfiber cloth, instrument polish, string cleaner, and fretboard conditioner.
  • Made In USA
  • Biodegradable cleaning products
  • 1 oz bottle of Axe Polish for cleaning and polishing finished surfaces
  • 1 1/3 oz bottle of Fresh-N-Easy string cleaner for removing oxidation, cleaning, lubricating, and protecting strings
  • 1 oz bottle of Fret Board Conditioner for moisturizing and cleaning porous fretboards while cleaning and protecting frets
  • 12” x 12” super fine microfiber cloth
$27.95
On Backorder
S-CS50W DeoxIT® Shield Wipes - Caig, 100% solution, 50 count
Package of 50
Protects and lubricates electronic connections. Ideal for severe environments; humidity, salts, pllutants, sulfer, etc. Safe on plastics.
  • Cleaner Audio
  • Clearer Video
  • Reliable Data
$18.85
S-CSN5S-6N DeoxIT® - Caig, Shield SN5 Spray
DeoxIT® SHIELD S5 Spray (formerly PreservIT P5S-6), 5% solution, flushing action, 142 g, (Applications = 1200 ±). Seals, lubricates and protects metal surfaces against oxidation and contamination. Use on clean/new surfaces or those precleaned with DeoxIT® D-Series contact cleaner.
$31.45
S-F500X Adhesive - Bob Smith Industries, Insta-Cure Super Thin
Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers! Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam. For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.
  • Water-thin consistency
  • 1-3 second cure time
  • For tight fitting applications
  • Available in 1oz. and 2oz. sizes

WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!
Starting at $5.50
S-F502X Adhesive - Bob Smith Industries, Insta-Cure Gap Filling
Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!
Starting at $5.50
S-F504X Adhesive - Bob Smith Industries, Maxi-Cure Extra Thick
Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)
Starting at $5.50
S-F506X Adhesive - Bob Smith Industries, Insta-Set Foam, Pump Spray
Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
  • Convenient pump spray (2oz.
Starting at $5.95
S-F508X Adhesive - Bob Smith Industries, Extender Tip for Glue
Package of 6
Bob Smith Industries ™ Extender Tip for CA glues. This extender tip can be used with all viscosities (Thin,Medium,Extra Thick) of cyanoacrylate that we offer from Bob Smith Industries™ and is compatible with both available sizes (1oz and 2oz) Extender tips can help you reach difficult spaces and control the flow of glue for more precise application.
  • Helps focus glue stream
  • Works with all three CA glue viscosities
  • Package of 6
Starting at $5.95
Don't see what you're looking for? Send us your product suggestions!