Maintenance Products

S-CTO-15 Tool Oil - for Maintenance & Work
Multi-use tool oil for both maintaining and using tools. This rust-preventive oil can be used to lubricate tools such as hinges on pliers. It can also be used to thinly coat metal tools to avoid future corrosion. Additionally, it can be used as a cutting and filing lubricant when slotting a nut for a guitar, slotting bridge saddles, and other cutting purposes. The 15ml bottle features a needle dropper tip.
$5.50
S-F312 Adhesive Replacement Top - Bob Smith Industries
Replacement top that is on all of BSI's non-Pocket CAs. Perfect for replacing damaged tops on any of the CA glues. These tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle. Compatible with S-F500,S-F501, S-F502, S-F503, S-F504, S-F505, S-F550, S-F551, and S-F540.
$1.25
S-F32X Adhesive Applicator - Bob Smith Industries, 6” long, Non-clog
Non-clog 6" long pipette for CA glue application. The regular tip is recommended for gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper The fine tip is recommended for the application of thin CAs. It can also be used for the fine application of Insta-Set accelerator and for applying fine lubricating oils. CA can be kept in the applicator for two weeks.
$1.25
S-F508X Adhesive Extender Tip - Bob Smith Industries, for Glue
Bob Smith Industries ™ Extender Tip for CA glues. This extender tip can be used with all viscosities (Thin,Medium,Extra Thick) of cyanoacrylate that we offer from Bob Smith Industries™ and is compatible with both available sizes (1oz and 2oz) Extender tips can help you reach difficult spaces and control the flow of glue for more precise application.
  • Helps focus glue stream
  • Works with all three CA glue viscosities
  • Package of 6
$3.55
package of 6
S-F313 Adhesive Replacement Cap - Bob Smith Industries
Replacement colored cap that fits over the S-F312 top. These are sold individually and the color is randomly selected
$1.25
S-F502X Adhesive - Bob Smith Industries, Insta-Cure Gap Filling
Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!
Starting at $6.50
S-CK-DG100L-2DB DeoxIT® Gold - Caig, Electronic Maintenance Kit
Special Order Item
Chemically improves ALL metal to metal connections and contacts for clearer audio, clearer video, and reliable data. Includes: DeoxIT® brush applicator (#D100L-2DB), (Applications = 500 ± brush strokes, 10mm long) DeoxIT® GOLD brush applicator (#G100L-2DB), (Applications = 500 ± brush strokes, 10mm long) Lint-free swabs, brushes and cloths
$31.45
package of 2
Out of Stock
S-F570 Epoxy - Bob Smith Industries, Quik-Cure
Quik-Cure™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. Quik-Cure™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. Quik-Cure™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with Quik-Cure™ can be handled after 15 minutes. Full strength is reached in 1 hour. Works Best On:
  • Hard Wood
  • Glass & Metal

Works Well On:
  • Balsa Wood
  • Soft Wood
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • White Foam
  • Reinforcing

Directions: Quik-Cure™ 5 min.
$12.50
S-CDP5S-6 DeoxIT® - Caig, D5 pump spray can, 25%
DeoxIt Pump Spray 25% concentrate solution. Non-flammable. 150ml. May be shipped by air to US and other countries. DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion. DeoxIT® D5 is safe on plastics.
$21.95
S-C6567 Superlube Gel Pen - Dunlop, System 65
Keep everything moving smoothly on your guitar with the Superlube Gel Pen. A flexible spatula tip helps to control where the lube goes for an easy application. Be it saddles, nut slots, tremolo parts, or elsewhere, this lubricant is safe for all stringed instrument maintenance.
$11.95
S-C220-1 Cleaner - Rubber Revitalizer, 1 oz, for restoration / protection
Cleans and revitalizes rubber, prolonging life and restoring function.
  • Prolongs life of rubber parts
  • Deglazes hardened rubber hoses, drive wheels and belts.
  • Revitalizes rubber by removing buildup
  • Restores the "gripping" surface
  • Cleans and makes surfaces like new
$10.45
S-F506X Adhesive - Bob Smith Industries, Insta-Set Foam, Pump Spray
Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
  • Convenient pump spray (2oz.
Starting at $6.50
S-CL260-X DeoxIT® - Caig, L260NP Grease (Formerly Cailube) Squeeze Tube
CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has a tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.
Starting at $5.25
S-F514 Threadlocker - Bob Smith Industries, IC-LOC Green
IC-LOC™ Green is a thin, medium-high strength threadlock that is applied to fasteners that are already assembled. IC-LOC™ Green wicks down into the threads of fasteners using capillary action and has good performance even with oil coated fasteners. Uses
  • Threads of fasteners
  • Bolts
  • Screws
  • Nuts

Directions: Shake well. Unscrew cap and cut off tip. Apply IC-LOC™ Green to clean preassembled fasteners. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Green prevents the loosening of threaded fasteners from shock and vibration by wicking into threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Locked fasteners are only removable by localized heating and hand tools. Remove residue with a damp cloth. Similar to Loctite Green.
$6.50
S-CF100L-L2C DeoxIT® Fader - Caig, Liquid squeeze tube
DeoxIT® cleaner and lubricant for conductive plastic faders and controls. Improves conductivity, maintains optimum signal quality, reduces wear and improves tactile feel - flushing action, safe on plastics. 2mL Squeeze Tube
$5.95
S-CFN5S-2N DeoxIT® Fader FN5 - Caig, Mini Spray, 5%, 40g
DeoxIT® Fader FN5 is a non-flammable precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. FN5 lubricates and protects plastic to plastic and plastic to metal surfaces.
$14.95
S-C10-4702 Corona Dope - GC Electronics, lacquer coating, 2 oz.
Corona Dope is useful for insulating components, circuits and assemblies. It has high dielectric strength and is especially useful where high voltages are involved. Also has excellent arc and corona resisting properties and protects surfaces against moisture. Cures in 20 minutes at room temperature. GC Electronics Corona Dope is commonly used to reseal flyback transformers and other parts on CRT monitors and displays.
  • Color: Black
  • Specific Gravity: 0.9
  • Dielectric Strength: 3800 V/Mil
  • Softening Point: 180°C to 190°C
  • Temperature Range: Up to 340°F
  • Viscosity @ 25°C: 220 cps
$16.45
S-C654 Guitar Polish - Dunlop, Formula 65 polish and cleaner
Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.
  • 4 oz. spray bottle
  • Polishes and protects
  • Will not build up
$8.99
S-CMATE Polish mate - Novus, cloths for polishing
Novus Plastic Polish Mates offer cloth-like softness in a disposable wiper. These wipers are highly absorbent, abrasion-resistant, low lint and extra durable. Package of 6 Mates. Using the wrong cloth when cleaning plastics can damage the surface. Standard paper toweling, polyester or rayon cloths can leave scratches in plastic. Alleviate this problem by using only NOVUS Plastic Polish Mates for all your plastic cleaning jobs. For best results, use with Novus Plastic Polishes No.1, No. 2, and No. 3
$3.75
package of 6
S-CTHP-1 Wipes - Tuff Wipes, Hand and Surface Towels
Pack of 75 Tuff Wipes for use on hands and cleaning surfaces. 9 1/2 x 12" sized sheets.
  • Easy-to-use textured wipes help clean up in a hurry.
  • Economical. Tough on grease, gentle on hands and surfaces.
  • Recommended for cleaning up paints, adhesives and lubricants.
$16.95
S-CF5S-H6 DeoxIT® Fader F5 - Caig, 5% solution
This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
$15.95
S-CD5S-2 DeoxIT® D5 - Caig, Mini Spray, 5%, 24g
The popular DeoxIT D5 contact cleaner & rejuvenator is now available in a mini spray can. DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion. This mini can comes with an attachable straw that fits in the adjustable spray nozzle for a controlled flushing action. DeoxIT® D5 is safe on plastics. Key Features:
  • Improves Conductivity
  • Deoxidizes, Cleans and Preserves
  • Reduces Intermittent Connections
  • Reduces Arcing & RFI
  • Reduces Wear & Abrasion
  • Temperature Range, -34 C (-29 F) to +200 C (400 F)
$10.69
S-CGBCP01 Care Pack - Lizard Spit, for Guitar / Bass
This Lizard Spit Guitar and Bass Care Pack contains 4 oz. Fretboard Conditioner, 4 oz. Guitar Polish, and a Lizard Spit Micro Fiber Cloth, everything you need to keep your guitar or bass in good condition and looking brand new!
$21.00
S-CAB-100 Brushes - Caig, for connector cleaning, package of 100
Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 100
$28.24
package of 100
Don't see what you're looking for? Send us your product suggestions!