Maintenance Products

S-F508X Adhesive - Bob Smith Industries, Extender Tip for Glue
Package of 6
Bob Smith Industries ™ Extender Tip for CA glues. This extender tip can be used with all viscosities (Thin,Medium,Extra Thick) of cyanoacrylate that we offer from Bob Smith Industries™ and is compatible with both available sizes (1oz and 2oz) Extender tips can help you reach difficult spaces and control the flow of glue for more precise application.
  • Helps focus glue stream
  • Works with all three CA glue viscosities
  • Package of 6
Starting at $5.30
Save 11%
Originally: $5.95
S-F502X Adhesive - Bob Smith Industries, Insta-Cure Gap Filling
Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!
Starting at $4.89
Save 11%
Originally: $5.50
S-F500X Adhesive - Bob Smith Industries, Insta-Cure Super Thin
Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers! Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam. For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.
  • Water-thin consistency
  • 1-3 second cure time
  • For tight fitting applications
  • Available in 1oz. and 2oz. sizes

WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!
Starting at $4.89
Save 11%
Originally: $5.50
S-F506X Adhesive - Bob Smith Industries, Insta-Set Foam, Pump Spray
Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
  • Convenient pump spray (2oz.
Starting at $5.30
Save 11%
Originally: $5.95
S-F504X Adhesive - Bob Smith Industries, Maxi-Cure Extra Thick
Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)
Starting at $4.89
Save 11%
Originally: $5.50
S-CSK-AV35 Audio / Video Survival Kit - Caig
Caig Audio/Visual Survival Kit. Includes: DeoxIT® DN5MS-15, (Applications = 150 ±) DeoxIT® GOLD GN5MS-15, (Applications = 150 ±) DeoxIT® Fader F5MS-H15, (Applications = 100 ±) DeoxIT® D1W, Individual Wipes, 3 each DeoxIT® GOLD G1W, Individual Wipes, 3 each DeoxIT® D100L-2C, (Applications = 50 ± drops, 0.04 ml/drop) DeoxIT® GOLD G100L-2C, (Applications = 50 ± drops, 0.04 ml/drop) DeoxIT® Fader F100L-H2C, (Applications = 50 ± drops, 0.04 ml/drop) Lint-free swabs, brushes and cloths Zip-lock pouch (4.5 x 7.5 x 1")
$31.11
Save 11%
Originally: $34.95
S-CAX1W-20 Axe wipes - Caig, metal string cleaner, package of 20
Package of 20
Axe Wipes - Metal string cleaner. Pack of 20, individually wrapped Get better sound quality from ALL your strings Cleaner, lubricant and protectant for metal strings
  • Prolongs life of metal strings
  • Improves sound quality
  • Dissolves oxidation and corrosion
  • Protects against acid from hands
  • Lubricates for fast / smooth movement
  • Safe to use. No waxy buildup. Contains no teflon, silicone or solvents
  • Package of 20

Use on all metal musical instrument strings; guitars, banjo, violin, autoharp, hammer dulcimer, mandola, pedal steel, zither, etc.
$12.42
Save 11%
Originally: $13.95
S-CAX30W Axe wipes - Caig, metal string cleaner, package of 30
Package of 30
Axe Wipes - Metal string cleaner prolongs life, improves sound quality and dissolves oxidation and corrosion on guitar strings. Protects against acid from hand and lubricates for fast smooth movement. 30 wipes.
$11.53
Save 11%
Originally: $12.95
S-C10-8602 Belt and Drive Non-Slip - GC Electronics
Prevents slippage in mechanical or electro-mechanical devices, which are driven with cords, belts, pulleys and drives. Restores proper functions on belts and drive pulleys in turntables, record changers and tape recorders, especially where the rubber parts have hardened and/or become slick and cause slippage.
  • Color: Clear to light brown
  • Specific Gravity: 0.91
  • Flash point: 54°F
  • Freezing Point: <90°C
  • Solubility in Water by wt.: 100% at 20°C
$7.08
Save 11%
Originally: $7.95
S-CAB-100 Brushes - Caig, for connector cleaning, package of 100
Package of 100
Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 100
$24.48
Save 11%
Originally: $27.50
S-CAB-25 Brushes - Caig, for connector cleaning, package of 25
Package of 25
Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 25
$11.13
Save 11%
Originally: $12.50
S-CGBCP01 Care Pack - Lizard Spit, for Guitar / Bass
This Lizard Spit Guitar and Bass Care Pack contains 4 oz. Fretboard Conditioner, 4 oz. Guitar Polish, and a Lizard Spit Micro Fiber Cloth, everything you need to keep your guitar or bass in good condition and looking brand new!
$18.69
Save 11%
Originally: $21.00
S-C10-302 Cement - GC Electronics, Service Cement
A quick-drying, waterproof clear adhesive which forms a strong, hard, water and vibration-resistant bond with minimal shrinkage. Ideal for speaker repairs and bonding semi-porus materials to each other or to metals, plastics, etc. 2 oz. bottle. Can be used as a glue for small speaker cone repairs.
$7.97
Save 11%
Originally: $8.95
S-CDCC-V511 Cleaner - Caig, Contact Cleaner Wash
DeoxIT® Brand Contact Cleaner Wash, Val-U Series Spray, adjustable valve, 5.5 oz., fast evaporating and safe on plastics.
Used for switches/relays, contacts/connectors, and parts/components.
Cannot ship by Air or Mail. Must ship UPS ground.
$6.45
Save 11%
Originally: $7.25
S-CCOLORBOND-PREP Cleaner - Color Bond, paint prep for leather or plastic
4 oz. of cleaner that mixes with a gallon of water to prepare upholstery for use with S-CCOLORBOND-BLK. Successfully painting your leather or plastic requires careful paint prep and ColorBond's Prep Cleaner is one product you should have. A Liquid non-solvent, aqueous-based cleaner, Prep Cleaner removes dirt, grime and oil when readying surfaces for paint. Great for everything from leather to soft plastics, it's been engineered to remove compounds and releasing agents that typically spoil most paint jobs. When it's time for leather or plastic paint prep, ColorBond Prep Cleaner will leave you with a clean surface ready for paint. Recommended for use before the application of all ColorBond products.
$6.68
Save 11%
Originally: $7.50
S-C220-1 Cleaner - Rubber Revitalizer, 1 oz
Cleans and revitalizes rubber, prolonging life and restoring function.
  • Prolongs life of rubber parts
  • Deglazes hardened rubber hoses, drive wheels and belts.
  • Revitalizes rubber by removing buildup
  • Restores the "gripping" surface
  • Cleans and makes surfaces like new
$7.08
Save 11%
Originally: $7.95
On Backorder
S-CRBR100L-25C Cleaner / Rejuvenator - Caig, CaiKleen, for Rubber
Rubber cleaner and rejuvenator. Precision cleaner for rubber rollers, belts, and platens. Use on printers, copiers, fax machines, and other office and industrial equipment. . RBR Liquid, 100%, 25 ml, needle dispenser
$10.24
Save 11%
Originally: $11.50
S-CLFC-C50 Cloth - Caig, Lint-free Cotton, set of 50
Package of 50
Lint-Free Cloth, cotton, 2.25" x 4.5", package of 50.
$7.97
Save 11%
Originally: $8.95
S-CMP04 Cloth - Lizard Spit, Micro Fiber
Baby blue micro fiber cloth for use with Lizard Spit or other polishing products.
$5.56
Save 11%
Originally: $6.25
S-C10-3702 Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
$8.77
Save 11%
Originally: $9.85
S-C10-4702 Corona Dope - GC Electronics, lacquer coating, 2 oz.
Corona Dope is useful for insulating components, circuits and assemblies. It has high dielectric strength and is especially useful where high voltages are involved. Also has excellent arc and corona resisting properties and protects surfaces against moisture. Cures in 20 minutes at room temperature.
  • Color: Black
  • Specific Gravity: 0.9
  • Dielectric Strength: 3800 V/Mil
  • Softening Point: 180°C to 190°C
  • Temperature Range: Up to 340°F
  • Viscosity @ 25°C: 220 cps
$8.88
Save 11%
Originally: $9.98
On Backorder
S-CDDW-V611 Degreaser Wash - Caig
Caig Heavy Duty Electronic Cleaner cleans electronic equipment and parts.
  • 5.5 oz can
  • Safe on Most Plastics
  • Non-Corrosive
  • Fast Drying, Zero Residue
  • Non-Ozone Depleting
  • VOC Complaint
$6.19
Save 11%
Originally: $6.95
S-CD5S-6-LMH DeoxIT - Caig, D5 Spray, Low-Medium-High Spray
DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion.
$15.09
Save 11%
Originally: $16.95
S-CD5S-6P DeoxIT - Caig, D5 Spray, Perfect Straw
DeoxIT® D-Series - Contact Cleaner & Rejuvenator with NEW Perfect-Straw™ nozzle. Never lose your straw again! More than a Contact Cleaner . . . Chemically Improves Connections (without harm to metals and plastics) DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts. Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
$12.42
Save 11%
Originally: $13.95
Don't see what you're looking for? Send us your product suggestions!