Maintenance Products

S-C10-302 Cement - GC Electronics, Service Cement
A quick-drying, waterproof clear adhesive which forms a strong, hard, water and vibration-resistant bond with minimal shrinkage. Ideal for speaker repairs and bonding semi-porus materials to each other or to metals, plastics, etc. 2 oz. bottle. Can be used as a glue for small speaker cone repairs.
$20.95
Out of Stock
S-C10-3702 Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
$10.25
S-CFN5S-2N DeoxIT® Fader FN5 - Caig, Mini Spray, 5%, 40g
DeoxIT® Fader FN5 is a non-flammable precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. FN5 lubricates and protects plastic to plastic and plastic to metal surfaces.
$17.50
S-CL260-X DeoxIT® - Caig, L260NP Grease (Formerly Cailube) Squeeze Tube
CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has a tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.
Starting at $5.25
S-C10-1762 Liquid Tape - GC Electronics, Insulating Coating, 2 oz
Heavy black coating used as insulating tape in applications where tape cannot be used.
Insulating Coating is an air-dry, synthetic rubber coating that can be easily applied by spraying, brushing, or dipping. Insulating Coating resists moistures, acids, abrasion, weathering, electrical shock, skidding/slipping, and corrosion. Coats give a comfortable, controlled, color-coded grip to all types of tools, lawn and garden, mechanical, electrical, woodworking, masonry.
  • Covers 30 square feet per gallon at 15 mils
  • Cured temperature use range -30 to 200F
  • Tensile strength: 3,7540 psi
  • Dielectric Strength: 1,400 V/Mil
$14.59
S-C215X Plastic Polish - Novus #3, heavy scratch remover
Removes scratches from acrylic surfaces; significantly reduces haziness. More abrasive than Novus #2 and is effective for deeper scratches. Treatment should be followed by Novus #2 to buff and polish surface.
Starting at $5.25
S-CMP12 Lubricator / Cleaner - Lizard Spit, for Strings, 1 ⅓ oz
  • Cleans and protects
  • Easier playing
  • Faster shredding

Cleans and protects all string materials, stops oxidation process, inhibits corrosion (rust) on phosphor-bronze, nickel, and stainless. Produces faster playing for easier shredding. Safe formula, will not harm fretboard surface. Safe for skin contact, non-allergenic, non-toxic and non-hazardous.
$7.50
S-CDDW-V611 Degreaser Wash - Caig, for cleaning electronic equipment
Caig Heavy Duty Electronic Cleaner cleans electronic equipment and parts.
  • 5.5 oz can
  • Safe on Most Plastics
  • Non-Corrosive
  • Fast Drying, Zero Residue
  • Non-Ozone Depleting
  • VOC Complaint
$7.95
S-CDFG-213-1 DeoxIT® Fader Grease - Caig, for lubricating electronics
DeoxIT® FaderGrease was specifically formulated to improve conductivity and lubricate conductive plastic and carbon compound faders, switches and other mechanisms with sliding surfaces. Provides clearer audio, clearer video, and reliable data. Over time these components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, smoke, drink spills and other contamination also degrade the components' lubricant. Re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. 28 grams
$21.95
S-F510 Threadlocker - Bob Smith Industries, IC-LOC Blue
IC-LOC™ Blue is a medium thickness, medium strength thread lock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required. Uses
  • Threads of fasteners
  • Bolts
  • Screws
  • Nuts

Directions: Shake well, then apply IC-LOC™ Blue to the clean and dry threaded areas before assembling non-plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Blue is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Blue prevents loosening of fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Blue seals and prevents rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Remove residue with a damp cloth. Similar to Loctite Blue.
$6.50
S-F514 Threadlocker - Bob Smith Industries, IC-LOC Green
IC-LOC™ Green is a thin, medium-high strength threadlock that is applied to fasteners that are already assembled. IC-LOC™ Green wicks down into the threads of fasteners using capillary action and has good performance even with oil coated fasteners. Uses
  • Threads of fasteners
  • Bolts
  • Screws
  • Nuts

Directions: Shake well. Unscrew cap and cut off tip. Apply IC-LOC™ Green to clean preassembled fasteners. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Green prevents the loosening of threaded fasteners from shock and vibration by wicking into threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Locked fasteners are only removable by localized heating and hand tools. Remove residue with a damp cloth. Similar to Loctite Green.
$6.50
S-F570 Epoxy - Bob Smith Industries, Quik-Cure
Quik-Cure™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. Quik-Cure™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. Quik-Cure™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with Quik-Cure™ can be handled after 15 minutes. Full strength is reached in 1 hour. Works Best On:
  • Hard Wood
  • Glass & Metal

Works Well On:
  • Balsa Wood
  • Soft Wood
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • White Foam
  • Reinforcing

Directions: Quik-Cure™ 5 min.
$12.50
S-C654C Guitar Polish & Cloth - Dunlop, Formula 65, Microfiber
Formula No. 65 Polish and Cleaner with a microfiber cloth! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand . And while you’re at it why not grab a nice microfiber cleaning cloth to go along with it? Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use. Includes:
  • (1) 4 oz. bottle of Dunlop Formula No. 65
  • (1) microfiber cleaning cloth
$7.65
S-CMP13B Polish - Lizard Spit, Scratch and Scuff Remover
Lizard Spit two-step scratch and scuff remover.
  • Biodegradable
  • Made In USA

Includes:
  • Step 1- Scratch and Scuff Remover
  • Step 2- Scratch and Scuff Finisher
$7.50
package of 2
S-CCW100P Pen - Caig, Circuit writer, for drawing traces
Circuit Writer precision conductive ink dispenser makes instant traces on most surfaces (epoxy, glass, metal). Draw traces on circuit boards, repair defective traces, make jumpers and shield electronics, design prototype circuits, repair rear-window heater traces. Silver based solution, 7ml pen dispenser.
$25.55
S-CD100S-2 DeoxIT® D100 Spray - Caig, 100% solution
DeoxIT® D100 Spray, 100% solution. Chemically improves metal to metal connections and contacts. Dissolves corrosion, improves contact, and protects surfaces
$20.95
S-CG100L-2DB DeoxIT® Gold - Caig, Brush Applicator
DeoxIT® GOLD G100L (formerly ProGold), 7.4mL Bottle with Brush Applicator, 100% solution.
  • Cleaner Audio
  • Cleaner Video
  • Reliable Data
  • Improve your:
    • USB
    • Firewire
    • HDMI/DVI
    • RCA
    • BNC
    • SCSI
    • Ethernet
    • S-Video
    • Component Video
    • HDTV Connections
    • ¼" Input Jacks
$32.75
S-F562 Adhesive Remover - Bob Smith Industries, Insta-Clean
Insta-Clean™ is ideal for removing price stickers and their adhesive residue. Insta-Clean™ will also remove scuff marks that regular household cleaners won't touch. Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. Uses
  • Stickers
  • Sticker Residue
  • Residue on Glass
  • Residue on Fiberglass

Directions: Spray directly onto the sticker to be removed. Let stand for 1 to 5 minutes and then peel off sticker and wipe clean.
$4.74
S-CG100L-2C DeoxIT® Gold - Caig, Squeeze Tube applicator
DeoxIT® GOLD G100L (formerly ProGold), Squeeze Tube, 100% solution, 2 mL, (Applications = 50 ± drops, 0.04 ml/drop)
$6.95
S-F550-X Adhesive - Bob Smith Industries, Super-Gold+
Super-Gold+™ is foam-safe, odorless super glue. Super glues can produce fumes that can be irritating to the eyes and nose. While not toxic, some people can become sensitized to these fumes. Super-Gold+™ is BSI’s odorless form of Cyanoacrylate that gives the same high performance characteristics as BSI’s Insta-Cure+ without the irritating fumes. Super-Gold+ will not fog clear plastic and glass, which can occur with the use of standard Cyanoacrylates. It can also be used on all foams.
Starting at $16.95
S-CRBR100L-25C Rubber Cleaner / Rejuvenator - Caig, CaiKleen
Rubber cleaner and rejuvenator. Precision cleaner for rubber rollers, belts, and platens. Use on printers, copiers, fax machines, and other office and industrial equipment. . RBR Liquid, 100%, 25 ml, needle dispenser
$13.29
S-F512 Threadlocker - Bob Smith Industries, IC-LOC Red
IC-LOC™ Red is a medium thickness, high strength thread lock that is applied to the threads of fasteners before assembly. Once the IC-LOC Red™ is cured, the fasteners are permanently together and cannot be disassembled. IC-LOC Red™ will maintain its strength up to 490° F. Uses
  • Threads of fasteners
  • Threads that need permanent bond

Directions: Shake well and then apply IC-LOC™ Red to the clean and dry threaded areas before assembling non- plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™Red is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Red permanently prevents the loosening of threaded fasteners from shock and vibration, while sealing and preventing the rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C).
$6.50
S-F530 Adhesive - Bob Smith Industries, IC-GEL
IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as Max-Cure™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want. IC-GEL™ is an excellent putty for plastic models. It will fill any void and can be formed to many shapes.
$12.55
S-C6500 Maintenance Kit - Dunlop, Guitar care products
Everything you need to do a deep clean and polish on your guitar’s fingerboard, finish, and strings.The Dunlop System 65 Guitar Maintenance Kit will help you keep your guitar in top notch condition. Set includes the following:
  • Bodygloss 65 Cream of Carnauba polishes, protects, and beautifies
  • Formula No. 65 cleaner/polish shines up your guitar’s body while eliminating any built up grime.
  • Ultraglide 65 String Cleaner/Conditioner cleans your strings and extends string life while eliminating string squeaks.
  • Fingerboard 01 Cleaner and Prep dissolves away unwanted dirt and residue from your fingerboard
  • Fingerboard 02 Deep Conditioner replenishes your fingerboard with natural protective oils.
  • Also includes 2 microfiber cleaning cloths, a micro fine fret polishing cloth, and a complete step-by-step guitar guide

Give your guitar some top level love!
$29.95
package of 5
Don't see what you're looking for? Send us your product suggestions!