Maintenance Products

Now you can get into all the hard to reach places with the new CAIG FLEX-TIP™ - Extension Tube for Perfect-Straw™.

• Reduces straw diameter at tip
• Reduces flow
• Flexible - Get to Hard to reach places (1.5" length)
• Fits ALL Perfect-Straw™ Tubes
• Chemically resistant tube

Glayzit Refinisher for restoration of Bakelite. A siliconized polish that restore Bakelite with its blend of premium wax and oil.

Nut slot graphite lubricant. Doesn't collect dust or absorb sound. Self drying, all natural, non-petroleum, non-toxic

4 oz. of cleaner that mixes with a gallon of water to prepare upholstery for use with S-CCOLORBOND-BLK. Successfully painting your leather or plastic requires careful paint prep and ColorBond's Prep Cleaner is one product you should have. A Liquid non-solvent, aqueous-based cleaner, Prep Cleaner removes dirt, grime and oil when readying surfaces for paint. Great for everything from leather to soft plastics, it's been engineered to remove compounds and releasing agents that typically spoil most paint jobs. When it's time for leather or plastic paint prep, ColorBond Prep Cleaner will leave you with a clean surface ready for paint. Recommended for use before the application of all ColorBond products.

Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.

• 4 oz. spray bottle
• Polishes and protects
• Will not build up

DeoxIt Pump Spray 25% concentrate solution. Non-flammable. 150ml. May be shipped by air to US and other countries. DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion. DeoxIT® D5 is safe on plastics.

Designed to polish all types of fret wire. Includes 24 × polish pads, 2 × fretboard guards, 1 × finishing cloth

DeoxIT® Fader Spray (formerly CaiLube MCL, MCL100S-L2) is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.

DeoxIT® GOLD (formerly ProGold), is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.).Use on plated connectors, contacts and metal surfaces for maximum performance and protection. Recommended for critical applications where only slight cleaning action is necessary. If the surface looks clean, applying DeoxIT® contact cleaner first is usually not necessary. DeoxIT® GOLD is designed to dissolve small amounts of oxidation.

CAIG DeoxIT brand tip tinner 14.2 gram jar, soldering tip cleaner and conditioner. For cleaning and protecting of soldering iron tips. Prevents oxidation of tips. Keep your soldering iron tip optimized for accepting solder and efficiently heating your soldering surfaces for an easy flow of solder between the iron’s tip and your work. To use, dip the heated soldering iron tip into the compound. (Keep the lid on the container when not in use). A double sided tape on the bottom allows you to secure the jar to your soldering station.

Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)

A quick-drying, waterproof clear adhesive which forms a strong, hard, water and vibration-resistant bond with minimal shrinkage. Ideal for speaker repairs and bonding semi-porus materials to each other or to metals, plastics, etc. 2 oz. bottle. Can be used as a glue for small speaker cone repairs.

Make your fretboard happy!
Keep fretboards clean and avoid cracking and drying by conditioning them with Dunlop Fretboard 65 Ultimate Lemon Oil.
Dunlop Fretboard 65 Ultimate Lemon Oil will remove grime and return your fretboard to it’s original luster quickly and easily. And once the dirt and grime are gone Fretboard 65 will keep it away by providing an invisible sealant against stains and moisture.
*Note* - Not for use on maple fretboards.

• Protects your fretboard from cracking and drying
• Moisturizes your fretboard
• Removes dirt, grime, and grease
• 4 oz. bottle

Removes dirt and stains and slows oxidation of frets. Protects against drying and cracking by moisturizing and conditioning to preserve fret board life. Use Lizard Spit Guitar Polish for finished surfaces.

DeoxIT® D100L squeeze tube chemically improves metal to metal connections and contacts.100% solution, 2 ml,(Applications = 50 ± drops, 0.04 ml/drop).

Momentive clear IS808 adhesive sealant is compatible with rubber materials with a 24 hr cure time. Provides a 25 min fixture time. Delivers great performance with a shear strength of 150 psi, tensile strength of 300 psi and peel strength of 37 psi. Made in the USA.

Caig Flux Wash cleans and removes fluxes, light oils, and silicon.

• Safe on most plastics
• Evaporates quickly
• Removes wax and grease

Val-U Series Spray, adjustable valve, 5.5 oz.

Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 25

IC-LOC™ Purple prevents loosening of small fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Purple seals and prevents rusting of threads. Uses

• Threads of fasteners
• Bolts
• Screws
• Nuts

Directions: Shake well. Unscrew cap and cut off tip. Apply IC-LOC™ Purple to clean and dry threaded areas before assembling non-plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Purple is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. Cured temperature range is -60° to +300°F (-51° to +149°C). May attack some plastics. Remove residue with a damp cloth. Similar to Loctite Purple.

DeoxIT® D100L Brush Applicator, 100% solution, 7.4 ml, (Applications = 500 ± brush strokes, 10mm long).

Conductive Carbon Coating for most surfaces (rubber, epoxy, glass, plastic). It is ideal for repairing membrane buttons, keyboard buttons, and other carbon based surfaces. It may also be used as a coating for shielding (EMI) of electronics. Similar products on the market are more expensive, and have multiple containers requiring mixing prior to application. The CaiKote^TM 44 is applied in one step, allowed to dry and is ready for service.

By using this kit and few simple techniques, you can actually add life to plastic and keep it looking new. Best of all, you don't have to be a pro to get professional results. No. 3 removes heavy scratches, and No. 2 polishes out lighter imperfections. After removing the abrasions with No. 3 and No. 2, apply No. 1 to clean and shine plastic. Three-step system provides a clean, highly polished static- and dust-free surface.

Un-Cure™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of Un-Cure™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastic parts with a razor saw is usually the best option. Works Well On:

• Cyanoacrylates
• Super Glues

Directions: Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water.

Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.