Maintenance Products

Nut slot graphite lubricant. Doesn't collect dust or absorb sound. Self drying, all natural, non-petroleum, non-toxic

This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.

Type Z9, 1 fluid ounce. Silicone base, extra high-efficiency heat transfer. Made in USA. For mounting transistors, diodes, rectifiers, and resistors. Thermal joint compound for any device where efficient cooling is desired.

• For effective transfer of heat between components & heat sinks
• Will not dry or harden
• White paste

Grease-like consistency; opaque white in color; zero bleed; very stable at elevated temperatures; excellent thermal resistance and high thermal conductivity; efficient thermal coupler; effective and positive heat sink sealers and heat transfer agent. The product offers high thermal conductivity, virtually no bleed or evaporation over a wide operating temperature range. It will not harden, dry out or melt after 1,000 hours at 200°C. Meets Mil-C-47009 and Mil-C-47113.

Corona Dope is useful for insulating components, circuits and assemblies. It has high dielectric strength and is especially useful where high voltages are involved. Also has excellent arc and corona resisting properties and protects surfaces against moisture. Cures in 20 minutes at room temperature.

• Color: Black
• Specific Gravity: 0.9
• Dielectric Strength: 3800 V/Mil
• Softening Point: 180°C to 190°C
• Temperature Range: Up to 340°F
• Viscosity @ 25°C: 220 cps

DeoxIT® Fader Spray (formerly CaiLube MCL, MCL100S-L2) is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.

Prevents slippage in mechanical or electro-mechanical devices, which are driven with cords, belts, pulleys and drives. Restores proper functions on belts and drive pulleys in turntables, record changers and tape recorders, especially where the rubber parts have hardened and/or become slick and cause slippage.

• Color: Clear to light brown
• Specific Gravity: 0.91
• Flash point: 54°F
• Freezing Point: <90°C
• Solubility in Water by wt.: 100% at 20°C

DeoxIT® FaderGrease was specifically formulated to improve conductivity and lubricate conductive plastic and carbon compound faders, switches and other mechanisms with sliding surfaces.
Provides clearer audio, clearer video, and reliable data.
Over time these components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, smoke, drink spills and other contamination also degrade the components' lubricant. Re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. 28 grams

DeoxIT® cleaner and lubricant for conductive plastic faders and controls. Improves conductivity, maintains optimum signal quality, reduces wear and improves tactile feel - flushing action, safe on plastics. 2mL Squeeze Tube

For use on the entire fretboard, headstock, front,sides, back and pickguards. Also cleans and lubes bridge saddles, fine tuners on locking tremolo systems, tuning machine knobs and posts. US made with US materials, 4 oz.

Momentive clear IS808 adhesive sealant is compatible with rubber materials with a 24 hr cure time. Provides a 25 min fixture time. Delivers great performance with a shear strength of 150 psi, tensile strength of 300 psi and peel strength of 37 psi. Made in the USA.

DeoxIT® Fader FN5 is a non-flammable precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. FN5 lubricates and protects plastic to plastic and plastic to metal surfaces.

Circuit Writer precision conductive ink dispenser makes instant traces on most surfaces(epoxy, glass, metal). Draw traces on circuit boards, repair defective traces, make jumpers and shield electronics, design prototype circuits, repair rear-window heater traces. Silver based solution, 7ml pen dispenser.

CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has a tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.

• Cleans and protects
• Easier playing
• Faster shredding

Cleans and protects all string materials, stops oxidation process, inhibits corrosion (rust) on phosphor-bronze, nickel, and stainless. Produces faster playing for easier shredding. Safe formula, will not harm fretboard surface. Safe for skin contact, non-allergenic, non-toxic and non-hazardous.

Caig Audio/Visual Survival Kit. Includes: DeoxIT® DN5MS-15, (Applications = 150 ±) DeoxIT® GOLD GN5MS-15, (Applications = 150 ±) DeoxIT® Fader F5MS-H15, (Applications = 100 ±) DeoxIT® D1W, Individual Wipes, 3 each DeoxIT® GOLD G1W, Individual Wipes, 3 each DeoxIT® D100L-2C, (Applications = 50 ± drops, 0.04 ml/drop) DeoxIT® GOLD G100L-2C, (Applications = 50 ± drops, 0.04 ml/drop) DeoxIT® Fader F100L-H2C, (Applications = 50 ± drops, 0.04 ml/drop) Lint-free swabs, brushes and cloths Zip-lock pouch (4.5 x 7.5 x 1")

ColorBond Leather, Vinyl & Hard Plastic Refinisher makes refinishing upholstery of all types easy and inexpensive. Created for painting leather, vinyl and plastic, ColorBond L, V & HP Refinisher quickly penetrates upholstery surfaces to create a molecular bond that seals in color. If you need a durable finish that won't flake, crack or peel, ColorBond L, V & HP Refinisher will deliver. Prepare upholstery for refinishing with S-CCOLORBOND-PREP.

Keep everything moving smoothly on your guitar with the Superlube Gel Pen. A flexible spatula tip helps to control where the lube goes for an easy application. Be it saddles, nut slots, tremolo parts, or elsewhere, this lubricant is safe for all stringed instrument maintenance.

DeoxIT® connector and contact treatments kit improves performance and reliability on all parts and equipment.

20% Adjustable Value, 9 oz, 255 g Concentrated formula for superior lubrication and long-lasting protection from corrosion.

• Superior Lubrication & Protection
• Penetrates & Displaces Moisture
• Dissolves Corrosion
• Stops Squeaks
• Frees Sticky Mechanisms
• Excellent Migration (spreading) Properties
• Extremely Cost Effective - Smaller Amount Required
• Will Not Dry Out
• Prevents Tarnishing
• Seals and Protects Even Hard-to-Protect Metal Parts and Mechanisms