Luthier Parts & Tools

1M ohm, Solid Shaft. Original Fender. Used for Volume and Tone control in many Fender guitars as well as amplifiers.
$5.85

Genuine Fender® 250K pan pot with center detent. Pan pots are also known as balance pots. Solid shaft with 3/8” bushing. Mounting hardware not included. See R-VNUT-38 for a compatible nut and washer.
$4.95

250K ohm (audio taper), push-pull DPDT, split shaft. Made in Korea.
$7.45

250K ohm. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging. Some Fender guitars have a unique tone circuit that features a "Delta Tone' Control. The "Delta Tone' system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors.
$7.45

250K ohm, solid shaft. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender® packaging.
$6.95

250K ohm, solid shaft, no load. Some Fender guitars have a unique tone circuit that features a "Delta Tone" Control. The "Delta Tone" system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors. Unlike the TBX, which has a detent at the 5 position and gradually reduces the amount of filtration through the capacitor, the Delta-Tone's 'no-load' feature eliminates filtration completely at the detent and the result is more of the direct presence of the pickup.
$7.45

Original Fender solid shaft 250K potentiometer with J taper. 3/8-32 threading. The resistance between wiper and cold lug measures about 25% at half-way shaft rotation.
$7.95

Standard fit for most vintage American made tube amps.
$1.90

Standard fit for most vintage American made tube amps.
$1.90

Standard fit for most vintage American made tube amps.
$1.90

500K ohm (audio taper), solid shaft. Made in Taiwan.
$6.95

Tone control for Eric Clapton mod kit. Original Fender, 50K Audio, Split Shaft, 1/4" Bushing
$5.25

Solid shaft, audio taper. 24mm body diameter, 1/4 watt, 300 degree rotation, 1/4" shaft diameter, solder lugs, 3/8" bushing.
$2.65

Knurled split shaft, audio. 24 mm body diameter. 1/4" watt, 300° rotation. 1/4" shaft diameter. Solder lugs. 3/8" bushing.
$12.95

Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs
- 0.625" W x 0.625" L x 0.5" D
- 300° rotation
- Power Rating: ¼ watt
- ¼" Knurled 18-Spline Split Shaft
- ¾" Bushing Length
- Tolerance: ±20 %
- Very Low Noise
$8.80

Bourns Audio Potentiometer, Vintage Premium, Conductive Polymer, Solder Lugs
- 0.625" W x 0.377" L x 0.625" D
- 300° rotation
- Power Rating: ¼ watt
- Tolerance: 10 %
- ¼" Fine Knurled Split Shaft
- ⅜" Bushing Length
- J Hooks
- Specifically designed for vintage guitars
- Very Low Noise
$17.49

Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.65

Bourns Linear Taper pots. Carbon Element, Split Shaft, Solder Lugs.
- 24mm Body Diameter
- ¼ watt
- 300° rotation
- ¼" Knurled 18-Spline Split Shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 250V
Starting at $2.50

Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs.
This Bourns Guitar Potentiometer with Push-Pull Switch allows the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
This Bourns Guitar Potentiometer with Push-Pull Switch allows the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
- 17mm Body Diameter
- 300° rotation
- Power Rating: 0.1 watt
- ¼" Knurled 18-Spline Split Shaft
- DPDT Push-Pull Switch
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 150V
$7.95

Bourns Audio Taper Potentiometer. Carbon Element, Split Shaft, Solder Lugs.
- 24mm Body Diameter
- ¼ watt
- 300° rotation
- ¼" Knurled 18-Spline Split Shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 250V
Starting at $2.50

Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.
Starting at $8.80
Save 2%
Originally: $8.95

Potentiometer - Bourns, Linear Taper, Knurled Split Shaft, Premium
$9.95

Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 6mm shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
$7.95