Luthier Parts & Tools

Made in U.S. vintage spec ABR-1 bridge with no retaining wire and plated brass saddles. Hardware sold separately. See P-GKLU-KLP127X for a complete set. The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

U.S. made replacement retaining wire for wired ABR-1 bridges. Made of high quality spring steel. Fits our U.S. made bridges as well as Gibson spec bridges.

Made in U.S. vintage-spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with raw brass saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP128X. The bridge features the vintage-style retaining wire that secures the raw brass saddles and intonation screws onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

Made in U.S. modern-spec tune-o-matic bridge with no retaining wire. This bridge is fully plated and comes with pre-slotted saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP120XC. This Nashville bridge is a great upgrade that features wider intonation adjustments and a larger mass for better tone and sustain.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm
• For use with 4.95mm stud posts

U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.

• 3.22 in. (82mm) stud spacing

Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with plated brass saddles. Mounting hardware sold separately. The bridge features the vintage-style retaining wire that secures the plated brass saddles and intonation screws onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

The PQ-9000-00 is a blank TUSQ acoustic saddle with a slight radius on top. It is a great option for someone who wants to custom shape a new saddle. A lot of the work is already done for you.
Dimensions:

• Length - 3.02 in. (76.72mm)
• Width - 0.124 in. (3.16mm)
• Height - 0.45 in. (11.42mm)

Beautiful TUSQ traditional style bridge pins with a 2mm dot inlay. This is a perfect option to upgrade the pins in your acoustic guitar and dramatically improve the harmonics and tone of your instrument. These pins have a 5.14mm diameter.

The PQ-9100-00 is a great option to upgrade or replace the saddle on your Martin acoustic guitar. It is pre-shaped for a quick and simple install.
Dimensions:

• Length - 2.908 in. (73.87mm)
• Width - 0.100 in. (2.56mm)
• Height - 0.383 in. (9.73mm)
  

The PQ-9200-C0 is a great option to replace or upgrade the saddle on your Taylor acoustic as well as many other popular guitars. It is compensated to help improve the playability of your guitar.
Dimensions:

• Length - 2.8 in. (71.12mm)
• Width - 0.22 in. (3.1mm)
• Height - 0.392 in. (9.99mm)

The PQ-9280-C0 is a great option to replace or upgrade the saddle on your acoustic guitar. It is our most popular saddle and will work with many other guitars. It is 1/8" thick and is compensated to help improve the playability of your guitar. Dimensions:

• Length - 2.88 in. (73.15mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.43 in. (10.92mm)

Made in U.S. vintage spec ABR-1 bridge with no retaining wire and nylon saddles. Hardware sold separately. See P-GKLU-KLP1273N for a complete set. The bridge uses string tension along with the set screws to secure the nylon saddles onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

Same brass saddles used on the WT3 Wilkinson by Gotoh bridge. Also a great upgrade on your stock vintage style bridge. Adjustable pivot for intonation while maintaining a vintage tone. Set of 3 2-string saddle replacements.

Will fit most USA 3-saddle Telecasters, Vintage Series '52 reissue, Custom Shop and more. Also fits most Mexican Telecasters. Made from the highest quality material. Complete with springs and screws.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Threaded thumbwheel style studs and anchor bushings. Hardware included.

Original Fender® bridge cover for vintage J-Bass.

Genuine Fender chrome hard-tail bridge assembly for use on Classic and Pawn Shop series instruments. Includes six stamped saddles, intonation screws and springs, and saddle-height adjustment screws.

• String-through-body design
• Mounting hardware not included
• 2-7/32" String Spacing

For non-tremolo fixed bridge Strat® style guitars that have through-body string mounting. Steel saddle. Saddle intonation can be individually adjusted. Mounting screws included. Hardware included.

Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)

The Tremsetter greatly improves guitar performance by automatically returning your full floating tremolo to an exact "zero" neutral position, eliminating flutter and sag, so your guitar remains in tune. You can bend strings, play bridge harmonics, aggressive rhythm parts or mute strings and the bridge remains stable. Best of all, the Trem-Setter is total retro-fit. No need to chop up your vintage axe, just install it and play! Includes mounting instructions.

This bridge features an artistic acanthus flower engraving that adds a custom look to Telecaster guitars. Designed for use with a Telecaster® single coil pickup, this bridge includes six adjustable chrome-plated brass saddles, and features a string-through design. The Gotoh Luxury-Mode series includes stylized parts made with an ultra fine, high-speed carving technology. These parts are replacements that can enhance the appearance of any guitar. Four mounting screws and a hex key for the saddle adjustments are included with this bridge plate.

The Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge is hand polished for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones.

Vintage-style chrome bridge assembly for use on most Standard, Deluxe, Roadhouse™, Lone Star™, and Blacktop Stratocaster models manufactured from 2006-present. Includes six bent "Fender"-stamped saddles, intonation screws and springs, and saddle-height adjustment screws. Mounting hardware, tremolo claw, tremolo springs and tremolo arm not included.

• 2-1/16" mounting spacing*
• Standard 10/32 tremolo arm threading
• For a variety of Stratocaster models (2006-present)

*Note that 2-1/16" bridge mounting spacing means that bridge-mounting screws will not fit vintage or vintage reissue instrument unless modified to do so.

Gotoh 12-String Bridge for Electric Guitar – This Twelve string bridge for Electric Solidbody guitars allows each string to be individually adjusted for intonation. Hardware included.