Luthier Parts & Tools

Pre-slotted black bone nuts for Gibson necks with a 12” radius. A 12” fingerboard is the common radius used on most Gibson guitars. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.

• Height - 9.3 mm
• Width - 43.4 mm
• Thickness - 4.8 mm
• Radius - 12 in.

Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 9.5” radius. A 9.5” fingerboard has been the standard Fender® neck radius since the 1980s. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.

• Height - 5.4 mm
• Width - 42.86 mm
• Thickness - 3.3 mm
• Radius - 9.5 in.

For a version of this nut with a 7.25” radius, see P-GTNN20.

Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 7.25” radius. A 7.25” fingerboard radius originated in the early 1950s and was used for most Fender® electric instruments until the 1980s.

• Height - 5.4 mm
• Width - 42.86 mm
• Thickness - 3.3 mm
• Radius - 7.25 in.

For a version of this nut with a 9.5” radius, see P-GTNN21.

The 6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.730 in. (43.94mm)
• Width - 0.243 in. (6.16mm)
• Height - 0.357 in. (9.08mm)
• E to E - 1.344 in. (34.14mm)
• Radius - 15 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-5.

Original Fender pre-slotted bone nut for Teles and Strats.

The 1204-00 is the perfect option to upgrade the nut on your Fender Precision style Bass guitar. It is pre-slotted making installation quick and simple. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.65 in. (41.91mm)
• Width - 0.125 in. (3.17mm)
• Height - 0.187 in. (4.75mm)
• E to G - 1.25 in. (31.75mm)
• Radius - 7.25 in.

High-quality solid-brass string nut as used on the Yngwie Malmsteen Stratocaster®, for use with Stratocaster and Telecaster® guitars.
Designed for 9.5"-radius fingerboards and pre-slotted with string location grooves to simplify spacing and positioning during final slot filing.
Features:

• High-quality solid-brass string nut
• For 9.5" fingerboard radius
• Pre-slotted
• 9.5" (241mm) top and bottom radius
• 1.620” (41.15mm) wide

The PQ-6000-00 is a great option to upgrade the nut on your Gibson style electric guitar. It is pre-slotted for a quick and simple install. Dimensions:

• Length - 1.713 in. (44.07mm)
• Width - 0.196 in. (4.98mm)
• Height - 0.329 in. (8.36mm)
• E to E - 1.398 in. (35.52mm)

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.

• Measures 52.5mm x 10mm x 4.95mm
• Sold individually

Set of two Fender® high-quality melamine (simulated bone) string nuts with 9.5" radius, for use with most Fender instruments

The PQ-6116-00 is the perfect option to replace and upgrade the nut on your acoustic or electric guitar. It is pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.707 in. (43.36mm)
• Width - 0.192 in. (4.88mm)
• Height - 0.331 in. (8.41mm)
• E to E - 1.435 in. (36.45mm)

Stratocaster guitar nut - plastic construction

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.

The PQ-1720-00 is the perfect option to upgrade the nut on your six string guitar. It is pre-slotted for a quick and simple install. It is a very common nut used in the Godin family of guitars.
Dimensions:

• Length - 1.695 in. (43.05mm)
• Width - 0.204 in. (5.18mm)
• Height - 0.403 in. (10.24mm)
• E to E - 1.415 in. (35.93mm)

Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 41mm (1 5/8") Radius: 360mm Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.

This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.

• Length = 2 1/64 inches (51.25mm)
• Height = 11/64 inches (4.55mm)
• Thickness = 1/8 inch (3.1mm)

The PQ-5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom. It is pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.687 in. (42.85mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.198 in. (5.03mm)
• E to E - 1.363 in. (34.62mm)

For a Tusq XL version of this nut, see P-GNUT-TUSQ-EPS-1XL.

The PQ-4187-00 is a 3/16" thick block or slab of pure TUSQ. It can be used to make a nut, small saddle or just about anything you can imagine.
Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.187 in. (4.75mm)
• Height - 0.437 in. (11.1mm)
  

Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.

The PQ-5042-00 is a great option to upgrade the nut on your Fender style electric guitar (or a guitar with similar specs). It is pre-slotted for a quick and simple install. It is 3/16" tall so make sure that is enough height for your guitar. Dimensions: Length - 1.653 in. (41.98mm) Width - 0.126 in. (3.22mm) Height - 0.196 in. (4.98mm) E to E - 1.388 in. (35.25mm)

The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16” thick slab of TUSQ XL. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.187 in. (4.75mm)
• Height - 0.437 in. (11.1mm)

Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 1-11/16'' (43mm). Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.

The PT-5042-00 is a great option to upgrade the nut on your Fender style electric guitar (or a guitar with similar specs). It is pre-slotted for a quick and simple install. It is 3/16" tall so make sure that is enough height for your guitar. Dimensions:

• Length - 1.652 in. (41.98mm)
• Width - 0.126 in. (3.22mm)
• Height - 0.196 in. (4.98mm)
• E to E - 1.388 in. (35.25mm)
• Radius - 12 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-6. For a similar nut that works on curved and flat Fender style necks, see P-GNUT-TUSQ-EPS-1XL-X.

The 6010-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made before 2014. It is pre-slotted to make for a quick and easy install. The P-GNUT-TUSQ-EPS-4XL-X (post-2014) is slightly taller than this nut, when in doubt, choose the 6011, as you can always sand the bottom of the nut to adjust it lower. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.714 in. (43.53mm)
• Width - 0.185 in. (4.71mm)
• Height - 0.369 in. (9.37mm)
• E to E - 1.412 in. (35.87mm)
• Radius - 12 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-3.