Luthier Parts & Tools

Fender

Fender® - Founded in Fullerton California by Leo Fender, Fender Musical Instruments Corp is the world's foremost manufacturer of guitars, basses, amplifiers and related equipment dating back to the 1940's.
S-H118 Screw - Fender®, Pickup Mounting, for P-Bass & J-Bass
Package of 12
4 x 1.25, package of 12. For a variety of vintage and contemporary Precision and Jazz Bass models
$5.15
P-SW51 Selector Switch - Fender®, Pickups, American Strat 5-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality 5-position pickup selector switch. Includes mounting screws, one white and one black switch tip.
$9.50
C-FWDX-150 Capacitor - Fender, 150V, Wax Paper
Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses.
Starting at $12.95
P-SW53 Switch - Fender®, Pickup Selector, 4-Way Telecaster Mod
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 4 position switch with knob and mounting hardware. Telecaster players have long debated the merits of having their pickups wired in parallel vs. in series. In the traditional parallel wiring configuration, pickup output is relatively consistent across all three positions. A Telecaster with its pickups wired in series differs in that when both pickups are on at the same time, the combination produces fatter tone and higher output.
$18.95
R-V250KJ-SS Potentiometer - Fender®, 250kΩ, J Taper, Solid Shaft, Control
Original Fender solid shaft 250K potentiometer with J taper. 3/8-32 threading. The resistance between wiper and cold lug measures about 25% at half-way shaft rotation.
$7.95
On Backorder
R-V250K-PP-SP Potentiometer - Fender®, 250kΩ, Knurled Shaft, Push-Pull
250K ohm (audio taper), push-pull DPDT, split shaft. Made in Korea.
$7.45
P-GCOV-20 Cover - Fender®, for Vintage P-Bass, Chrome
Original Fender® pickup cover for vintage P-Bass, chrome.
$12.55
R-VF-250K-500K Potentiometer - Fender, dual Audio, concentric solid shaft
Original Fender, Audio potentiometer, concentric, 250kΩ / 500kΩ, solid shaft.
  • Mounting hardware not included
  • Used for stacked volume controls on American Vintage '62 Jazz Bass® and Acoustasonic Telecaster®, and Nashville Power Telecaster® guitars
  • Will not work with push-on style control knobs; set screw mounting knobs only
$7.95
R-V250K-SP-NL Potentiometer - Fender®, 250kΩ, Knurled Shaft, No Load
250K ohm. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging. Some Fender guitars have a unique tone circuit that features a "Delta Tone' Control. The "Delta Tone' system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors.
$7.45
P-GCOV-22 Cover - Fender®, '51 P-Bass / Tele Bass, Chrome
Original Fender® pickup cover for '51 P Bass/Tele Bass, chrome.
$17.45
R-VX-S1 Potentiometer - Fender®, S-1, Knurled Shaft, 4PDT
The Fender® S-1™ switched pot is a stealthy way to mod a strat without drilling any extra holes. The switch can be configured for almost any configuration with its four double-throw poles. S-1™ pots use a 3/8” bushing.
$24.95
R-V250K-SS-NL Potentiometer - Fender, 250K, Solid Shaft, No Load
250K ohm, solid shaft, no load. Some Fender guitars have a unique tone circuit that features a "Delta Tone" Control. The "Delta Tone" system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors. Unlike the TBX, which has a detent at the 5 position and gradually reduces the amount of filtration through the capacitor, the Delta-Tone's 'no-load' feature eliminates filtration completely at the detent and the result is more of the direct presence of the pickup.
$7.45
P-K335X Switch Tip - Fender®, Stratocaster
Package of 2
Colors Available:
Original Fender switch tips. Pack of 2.
$4.25
R-V50KA-SP-EC Potentiometer - Fender, 50kΩ, Audio, Split Shaft, ¼" Bushing
Tone control for Eric Clapton mod kit. Original Fender, 50K Audio, Split Shaft, 1/4" Bushing
$5.25
P-PUF52 Pickup - Fender, '57/'62, Strat, Single Coil
Single '57/'62 Strat single coil pickup. Reverse engineered, these pickups deliver the original vintage Stratocaster sound, feel, and vibe! This is pure and original Strat tone. The staggered beveled-edge Alnico 5 magnets with Formvar wire produce glistening highs and warm lows that are unquestionably vintage. These pickups feature special beveled edge Alnico 5 magnets and enamel-coated magnet wire.
This pickup is sold individually.
  • DC Resistance: 5.6k
  • Inductance: 3 H
$64.95
Out of Stock
S-H107 Screw - Fender®, for Pickups and Switches
Package of 12
Original Fender 6-32 screws for use on pickups and switches.
$4.45
P-PUFCV-X Cover - Fender®, for Stratocaster, 3 Pieces, Black
Package of 3
Colors Available:
Original Fender® replacement pickup cover for Strat, package of 3.
Starting at $7.25
S-HRVNT Nut - Fender, Hex Type, for Potentiometers
Package of 12
Hex nut for Fender® potentiometers. Package of 12.
$4.45
P-SW50 Switch - Fender®, Pickup Selector, Strat & Tele 3-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 3 position switch with knob and mounting hardware.
$11.50
C-FVD05-150 Capacitor - Fender, .05 µF at 150V, Vintage '50s, Mylar & Tin
Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including the American Vintage series of guitars and basses.
$25.95
P-SW52 Switch - Fender®, Pickup Selector, 5-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 5 position super switch with knob and mounting hardware.
$18.95
R-V1MJ-SS Potentiometer - Fender, 1MΩ, J Taper, Solid Shaft, Panel Mount
Pot, Solid Shaft, 1M J Taper
$8.40
R-V1M-SS Potentiometer - Fender®, 1M, Solid Shaft
1M ohm, Solid Shaft. Original Fender. Used for Volume and Tone control in many Fender guitars as well as amplifiers.
$5.85
P-HP-TUBE Pickup Tubing - Original Fender®, rubber
Package of 12
Genuine Fender®. Package of 12 pieces of rubber tubing for pickup mounting on most Fender instruments with pickguard-mount pickups.
$4.95
Don't see what you're looking for? Send us your product suggestions!