Luthier Parts & Tools

Colors Available:
$0.20

Colors Available:
$0.20

Colors Available:
Starting at $0.50

Colors Available:
Starting at $0.59

Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$0.95

Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.05

Premium two position SPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
Features
- 5.59mm non-threaded bushing
- 2-Position On/On
- 4.95mm panel hole diameter
- Single pole/Double throw (SPDT)
- PC Pins
Features
- Power Rating: DC9V, 1A
- Contact Resistance: <20mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 30,000 Cycles
- RoHS & Lead-free
$1.35

Premium two position DPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
Features
- 5.59mm non-threaded bushing
- 2-Position On/On
- 4.95mm panel hole diameter
- Double pole/Double throw (DPDT)
- PC Pins
Features
- Power Rating: DC9V, 1A
- Contact Resistance: <20mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 30,000 Cycles
- RoHS & Lead-free
$1.45

Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT, 2 Position, On-On. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.
$1.64

Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated) Outside Diameter:5/8" Inside diameter threading:15/32" Width: 3/32"
$1.79

Colors Available:
- Fits genuine Switchcraft switches
- Available in gold or nickel finish
- Sold individually
Starting at $2.15

Colors Available:
$2.70

Carling mini-toggle switch, SPDT, PC Pins. 2-Position.
- 0.354" bushing length
- 2-Position On/On
- ¼" mounting hole diameter
- Single pole/Double throw (SPDT)
- PC mount pins
$2.95

0.354" bushing length. 2-Position On/On. ¼" mounting hole diameter. Double pole/Double throw (DPDT). PC mount pins.
$3.25

Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$3.35

Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$3.50

Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
- 0.354" bushing length
- 2-Position On/On
- ¼" mounting hole diameter
- Single pole/Double throw (SPDT)
- PC mount pins
$3.50

Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:
Note: On-On switches may sometimes be referred to as On-None-On.
- SPDT ( Single Pole/ Double Throw) On-On switch
- 0.275" bushing length
- 0.270” bat length
- ¼" chassis hole diameter
- Right angle, PC Mount terminals
Note: On-On switches may sometimes be referred to as On-None-On.
$3.50

Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars.
- 0.354" bushing length
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
- On-On
$3.50

Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
$3.50

Carling mini-toggle switch, double pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position.
Starting at $3.50

Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs
- DPDT ( Double Pole/ Double Throw) switch
- 0.354" bushing length
- 0.409” bat length
- ¼" chassis hole diameter
- Solder terminals
Starting at $3.65

Genuine Switchcraft® DPDT 2-position On-On slide switch for use on Jazzmaster and Jaguar style guitars. Upgrade cheap or malfunctioning switches with these high quality replacements.
- Recommended .75 control cavity depth
- 1.125” center-to-center mounting hole spacing
- Latching
- Screws not included
- See S-HS440-12 for compatible screws
$3.75

Carling submini toggle switch, DPDT, 2 position, .195" mounting hole diameter, 0.236" bushing length.
$4.15