Luthier Parts & Tools

P-GKLU-KLP11X Anchor Bushings - USA Thread, Steel
Package of 2
High quality USA made steel anchor bushings available in long or short lengths with a coarse or fine knurl for a variety of stop tailpiece uses. These bushings fit 5/16 – 24 US Threaded studs. Studs sold separately.
Starting at $1.25
P-GB-WASHER-2 Washer - Bigsby, Plastic, for tremolo units
Genuine Bigsby® replacement washer for tremolo units. This white plastic washer sits beneath the spring in the cup located on the frame. These washers reduce noise and potential damage to the spring and cup.
$1.45
On Backorder
P-GB-SCREW-4 Screw - Bigsby, for Mounting Bridge Plates
Genuine Bigsby® mounting screws. These wood screws are for mounting bridge plates to the top of the guitar body. These are the stock screws included with plates like P-GB-PLATE.
$2.25
P-GB-SCREW-3 Screw - Bigsby, set screw for vibratos and more
Genuine Bigsby® replacement set screw for handle brackets and assemblies. This set screw is compatible with the Kalamazoo Series and some Lightning Series vibratos.
$2.25
Out of Stock
P-GB-SCREW-2X Screw - Bigsby, for Mounting to Guitar body
Colors Available:
Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the vibrato to the top of the guitar body.
$2.50
P-GB-SCREW-1X Screw - Bigsby, Regular #125, Hinge
Colors Available:
Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.
$3.45
P-GKLU-KAB110M Anchor Bushings - Metric Thread, Zinc, Set of 2
Pair of standard stop bar anchor bushings for stud mounts with fine knurling and fits most guitars using a 0.986” body depth for the anchors. Made from zinc. Pairs with P-GKLU-KLP1099X studs. Studs sold separately.
$3.95
P-GB-BEARING-1 Bushing - Bigsby, Roller, Bronze, for B5, B7, B12
Genuine Bigsby® bronze roller bearing. Fits between P-GB-PIN-X and P-GB-ROLLER-S. These are the stock bearings used in B5, B7, and B12 vibratos.
$4.95
P-GB-PIN-X Pin - Bigsby, Roller, genuine replacement
Colors Available:
Genuine Bigsby® replacement roller pin. This roller pin is stock to the B5 and B7 vibrato units.
$5.25
P-GKLU-KLP1099X Tailpiece Studs - Metric Stop, Steel .781", set of 2
Package of 2
Colors Available:
U.S. made premium .781 in. (short) stoptail studs in metric threading. These steel studs feature a high quality plating for a perfect and durable finish. Set of 2. Bushings sold separately.
Starting at $6.56
P-GKLU-KLP1105X Tailpiece Studs - Imperial Stop, Steel, .781", set of 2
Package of 2
Colors Available:
U.S. made quality .781 in. (short) stoptail studs in standard threading. Five step plating process for extra durability This standard stop bar stud is made in steel for added strength and sustain and works with all US threaded bushings. Body Inserts sold separately.
Starting at $6.56
P-GKLU-KLP1101X Tailpiece Studs - Stop, Brass, .781 inch, set of 2
Package of 2
Colors Available:
U.S. made quality .781 in. (short) stoptail studs in standard threading. Five step plating process for extra durability. Set of 2. This standard stop bar tailpiece stud made from brass works with US threaded bushings. Inserts sold separately.
Starting at $7.14
P-GKLU-KLP1115X Tailpiece Studs - Imperial Stop, Steel, .938", set of 2
Package of 2
Colors Available:
U.S. made quality .938 in. (long) stoptail studs in standard threading. Five step plating process for extra durability. Set of 2. This long stop bar tailpiece stud is made in steel for added strength and sustain. It is intended to be used with longer anchor bushings. Sold separately from inserts.
Starting at $7.67
P-GB-STUD-1X Handle Stud - Bigsby, genuine replacement
Colors Available:
Genuine Bigsby® replacement handle stud.
$8.59
P-GVB-SB-GRIP Vibramate - Super Grip for Bigsby Trems
The Vibramate Super Grip is custom made specifically to fit the arm of your Bigsby vibrato. The textured design adds contour to the overall grip and a soft comfortable feel for subtle vibrato techniques. The Vibramate Super Grip easily slides onto your existing Bigsby vibrato arm without any modifications or special tools. The tapered design ensures a snug fit once installed but can be removed just as easily by sliding it back off. One size fits all - Vibramate Super Grip fits all Bigsby vibratos using the standard stock flat arm including Import and Left-Hand models. Made in USA.
$8.95
P-GB-SPRING-5X Tension Spring - Bigsby, Vibrato, 1 ⅛" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 1 1/8" (28.6mm) in length and are the longest springs available from Bigsby®. 1 1/8" springs are longer than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to raise the trem arm.
$9.50
P-G-TP-ZX Tailpiece - Stop Bar, Vintage Spec, Zinc, USA
Colors Available:
U.S. made and true to vintage specifications. This stop tailpiece is made of zinc to match the Gibson spec used from the 1970s through the present. High quality plating is used on all options. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1131X.
  • 3.22 in. (82mm) stud spacing
Starting at $12.02
P-GB-SADDLE-1P Saddle - Bigsby, Bridge, New, Polished
Genuine Bigsby® compensated bridge with a 2 13/16” stud spacing. This polished bridge has pre-slotted saddles and is compensated for a plain G string. This bridge was used on Gretsch 6120W models. Please check stud spacing for compatibility.
$13.95
On Backorder
P-GGT-16-X Tailpiece - Gotoh, GE101Z, Height Adjustable
Colors Available:
This zinc diecast height adjustable stop tailpiece from GOTOH features threaded adjustable studs and knurled bushings. Hardware included. Anchor bushings: M8x1.25, 25mm height.
Starting at $15.95
P-GB-BRACKET-3X Bracket - Bigsby, Flat Handle Bracket
Colors Available:
Genuine Bigsby® flat handle bracket for use with Bigsby vibrato units. Includes set screw for mounting to vibrato. Arm and other hardware sold seperately.
Not compatible with Lightning Series vibratos.
For handles see P-GB-HANDLE-1X.
For 9.5" handles see P-GB-HANDLE-8X.
For handle fiber washer see P-GB-WASHER-1.
For handle pivot spring see P-GB-SPRING-3.
For handle nut see P-GB-NUT.
For complete handle assemblies see P-GB-HANDLE-6X.
Starting at $16.95
P-GTB820-A Tailpiece - Les Paul, Standard Style, Chrome
Replacement chrome tailpiece for Les Paul style guitars and others. M8 * 12.5 thread studs (anchor bushings included). Made in Korea.
$17.45
P-GB-ROLLER-X Roller - Bigsby, for B5, B7, and B12 Vibratos
Colors Available:
Genuine Bigsby® replacement roller for use with vibrato units. This is the stock roller for B5, B7, and B12 vibratos.
$17.95
P-GB-HINGE-5X Hinge - Bigsby, Conventional, B6 Style
Colors Available:
Bigsby long B6-style hinge plate.
Starting at $18.55
P-GB-HINGE-1X Hinge - Bigsby, Gretsch, for vibrato
Colors Available:
Genuine Bigsby® replacement hinge for Gretsch by Bigbsy B3C and B6C vibratos.
Starting at $18.55
Don't see what you're looking for? Send us your product suggestions!