Luthier Parts & Tools

S-T301 Power String Winder - Duck's Deluxe, color may vary
Fits any adjustable drill or adjustable screwdriver. One size for: guitars, bass, banjos, mandolins, steel guitars, dobros, jazz boxes, etc.
  • Precision molded solid body
  • No more manual winding ... string your instrument in minutes!
  • Direct drive to the tuning keys
  • Plastic, will not scratch tuner buttons.
  • The ultimate restringing tool for effortless string replacement

Color pictured is an example. Actual color may vary
$4.15
S-T207 Feeler Gauge - 20 Sizes, for measuring gaps / clearance
This precise set of 20 feeler gauges in the luthier's workshop can perform a wide variety of functions to measuring with string action to measuring the correct nut slot depths, fret slot width, string to fret clearances, and other hardware installation work, these ground steel feeler gauges are marked in both metric and imperial measurements for easy use.
$8.30
package of 20
S-T204 Wrench - Steel, Multi-Spanner, for guitar components
A small, easily-portable tool designed for quick adjustments of various instrument parts (including nuts and thumb wheels), from potentiometers and pickup switches to tuning machines. One end is designed for loosening, the other is designed for tightening. The device has been chamfered and polished to avoid damage to your instrument when used.
$9.05
S-T202 Understring Radius Gauges - 9 Sizes, for Saddle Adjustments
Our low profile aluminum understring radius gauges have a precision radiused top and bottom for accurate measurement. The slim shape allows you to take measurements of several radii without removing the strings on your guitar.
  • Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge. The bottom radius can also be used to set pickup polepiece height to the string radius.
  • Use the top radius of this gauge to determine the proper height adjustment for the bridge saddles.
  • The following gauges are included in this set: 7.25" 9.5" 10" 12" 14" 15" 16" 17" 20"
$13.95
package of 9
S-T200X String Action Gauge - Measurement Tool
A stainless steel pocket-sized String Action Gauge that's perfect for obtaining quick and accurate action measurements for acoustic and electric instruments. A must have in a busy repair shop! Measurements taken using this gauge include:
  • Saddle height/slot depth
  • String height
  • Nut height/slot depth
  • Pickup pole piece height/string to pole piece distance
  • Fret slot depth(unbound fingerboards only)

Plus more! The back includes a useful fraction/metric/decimal conversion chart that saves you time. Available in metric or in imperial models (sold individually)
$13.95
S-T308 Wrench - Dunlop, System 65, Uni-wrench
The Dunlop System 65 Uni-Wrench is great tool for tightening and loosening any threaded nut on a guitar or bass. This includes pots, jacks, bridge posts, rounded knurled nuts on selector switches and more.
$14.99
S-T309 String Action Gauge - Dunlop, System 65
The Dunlop System 65 String Action Gauge is a precision measurement tool for setups and adjustments. The gauge includes both metric and imperial measurements on opposite sides.
$14.99
S-T303 Guitar Setup Mat - Dunlop, System 65
Work on your guitars without the worry of scratching the finish. This thick neoprene mat measures 17 7/8” x 23 ¾”. The tight webbing on the surface ensures no marring and helps keep debris from sticking to the mat.
$16.99
S-T267 Radius Gauge - stainless steel, 6 radius measurements
This stainless steel radius gauge can measure six different radiuses as well as fret crown heights and string action height. Overall size 210mm x 25mm
Includes
  • 7.25"
  • 9.5"
  • 10"
  • 12"
  • 14"
  • 16"
$17.95
S-T203 String Spacing Ruler - Steel, for marking string locations
Get accurate string spacing without the use of complicated tools with this easy-to-use String Spacing Ruler. "Mark outer string locations with pencil lines (high and low E strings on guitars), usually about 1/8" in from fingerboard edges. Turn ruler over (use marked side). With wide spacing toward bass side, narrow spacing toward treble side, find group of marks (six for guitar) which best fit your two pencil lines. Use a razor knife or thin mechanical pencil to mark the string positions through the ruler's slots.
$19.95
S-T263 Knob & Bushing Puller - for Easy Removal From Guitar
The Knob and Bushing Puller's clear acrylic housing has a rubberized base to help protect the guitar's finish. The square unit has 2 ends- one end for pulling knobs, the other end can work with the attached hardware to easily extract Gibson, Schaller or Gotoh bridge and tailpiece stud bushings, without damaging the guitar Includes 6 bolts and 2 flat washers for pulling various bushing threads:
  • 5/16-20
  • 5/16-24
  • 5/16-18
  • 10-32
  • M5
  • M6
  • M8

Roughly 0.065" clearance between the bottom of the knob and the top of the guitar required for knob puller attachment.
$37.00
S-T258 Caliper - Digital, highly-accurate for luthiers
This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.
  • Measures fret height before AND after fret installation
  • Accurate readouts in inches or millimeters
  • A must for all precision guitar work
$44.95
Don't see what you're looking for? Send us your product suggestions!