Luthier Parts & Tools

Genuine Bigsby® replacement spring for tremolo units. These springs are 11/16" (17.5mm) in length and are the shortest springs available from Bigsby®. 11/16" springs are shorter than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to lower the trem arm.

Genuine Bigsby® replacement spring for tremolo units. These springs are 1 1/8" (28.6mm) in length and are the longest springs available from Bigsby®. 1 1/8" springs are longer than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to raise the trem arm.

Genuine Bigsby® replacement washer for tremolo units. This white plastic washer sits beneath the spring in the cup located on the frame. These washers reduce noise and potential damage to the spring and cup.

Genuine Bigsby® replacement spring for tremolo units. These springs are 1" (25.4mm) in length. 1" springs are longer than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to raise the trem arm.

Genuine Bigsby® replacement spring for tremolo units. These springs are 7/8" (22.2mm) in length. 7/8" springs are the standard size included with most stock Bigsby® models.

Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the vibrato to the top of the guitar body.

Genuine Bigsby® replacement vibrato handle washer.

Genuine Bigsby® replacement nut for vibrato handle.

Genuine Bigsby® replacement hinge for vibrato units. This hinge is the stock hinge used on the B7 and B3.

Genuine Bigsby® replacement hinge pin for tremolo units. This hinge pin measures 1 13/16" from the base of the head to the end.

Genuine Bigsby® replacement roller pin. This roller pin is stock to the B5 and B7 vibrato units.

Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.

• Genuine Bigsby® Vibrato Handle Pivot Spring.
• Diameter is 0.37 in. Height is 0.359 in.
• Used for handle pivot resistance.
• Located on underside of pivot joint on handle between the pivot nut and the handle.
• Not to be confused with a "Tension Spring".
• Picture is enlarged to show detail.
• Bigsby Part# 0495-1960

Genuine Bigsby® Chet Atkins bracket, two pieces connected, for use with Bigsby vibrato units. Includes all set screws required for attaching the arm to the bracket and the bracket to the vibrato. Arm sold separately.

Genuine Bigsby® Chet Atkins complete handle assembly for use with Bigsby vibrato units. This assembly attaches to vibratos using the included set screw.

Genuine Bigsby® Telecaster® plate for use with B5 vibratos. Standard Telecasters will require modifications for use with this plate. Five mounting wood screws included. Bridge sold seperately.

Genuine Bigsby® replacement roller for use with vibrato units. This is the stock roller for B5, B7, and B12 vibratos.

Genuine Bigsby® Les Paul bridge assembly for use with Bigsby vibrato units.

Genuine Bigsby® aluminum neck shim for use with B16 or other vibratos. This item is a replica of the original 1953 Bigsby® neck shim made for Telecasters using the B16 vibrato. These shims are made of a lightweight aluminum and raise the neck 3/16" for a proper angle to work with the floating bridge. The shim is not drilled. Bigsby suggests using a 3/8" drill bit.

Genuine Bigsby® Chet Atkins bracket, top piece, for use with Bigsby vibrato units. Includes set screws for mounting the arm. Lower piece, fiberwasher, handle spring and nut sold separately. Pre-installed handle stud not included on gold version.

Genuine Bigsby® mounting screws. These wood screws are for mounting bridge plates to the top of the guitar body. These are the stock screws included with plates like P-GB-PLATE.

The Bigsby Adjustable Tele Bridge is chrome plated and comes complete with 2 mounting bushings. It was designed for use with Telecaster guitars, but may be used on other similar models. Intonation on this bridge is individually adjustable for each string directly at each saddle. The threaded saddle design allows strings to be positioned where you want on the neck of your guitar. Note: Requires drilling insert holes. Bigsby Base Mounting Plate sold separately (P-GB-PLATE).

Genuine Bigsby® Chet Atkins replacement vibrato arm. This 7.5" long version is the stock size used in the Chet Atkins arm assemblies.

Genuine Bigsby® Duane Eddy handle assembly. This unit attaches to vibratos using the included set screw.