Luthier Parts & Tools

P-GB-SPRING-2X Tension Spring - Bigsby, Vibrato ⅞" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 7/8" (22.2mm) in length. 7/8" springs are the standard size included with most stock Bigsby® models.
Starting at $9.95
P-GB-HINGE-3 Hinge - Bigsby, Extra Short, stock for B3 / B7
Colors Available:
Genuine Bigsby® replacement hinge for vibrato units. This hinge is the stock hinge used on the B7 and B3.
      Starting at $23.95
      P-GB-WASHER-1 Washer - Bigsby, Fiber, for vibrato handle
      Genuine Bigsby® replacement vibrato handle washer.
      $1.45
      P-GB-PIN-X2 Pin - Bigsby, Hinge, genuine replacement
      Colors Available:
      Genuine Bigsby® replacement hinge pin for tremolo units. This hinge pin measures 1 13/16" from the base of the head to the end.
      Starting at $4.75
      P-GB-SCREW-2X Screw - Bigsby, for Mounting to Guitar body
      Colors Available:
      Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the vibrato to the top of the guitar body.
      Starting at $2.50
      P-GB-SPRING-4X Tension Spring - Bigsby, Vibrato, ~\frac{11}{16}~" long
      Colors Available:
      Genuine Bigsby® replacement spring for tremolo units. These springs are 11/16" (17.5mm) in length and are the shortest springs available from Bigsby®. 11/16" springs are shorter than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to lower the trem arm.
      Starting at $7.50
      P-GB-HANDLE-3X Vibrato Arm - Bigsby, Chet Atkins, 7.5"
      Colors Available:
      Genuine Bigsby® Chet Atkins replacement vibrato arm. This 7.5" long version is the stock size used in the Chet Atkins arm assemblies.
      Starting at $28.22
      P-GB-BRACKET-1X Bracket - Bigsby, Chet Atkins, 2 pieces
      Colors Available:
      Genuine Bigsby® Chet Atkins bracket, two pieces connected, for use with Bigsby vibrato units. Includes all set screws required for attaching the arm to the bracket and the bracket to the vibrato. Arm sold separately.
      Starting at $33.95
      P-GB-BRACKET-2X Bracket - Bigsby, Chet Atkins, top piece
      Colors Available:

      Genuine Bigsby® Chet Atkins bracket, top piece, for use with Bigsby vibrato units. Includes set screws for mounting the arm. Lower piece, fiberwasher, handle spring and nut sold separately. Pre-installed handle stud not included on gold version.

      $12.95
      On Backorder
      P-GB-SPRING-1X Tension Spring - Bigsby, Vibrato, 1" long
      Colors Available:
      Genuine Bigsby® replacement spring for tremolo units. These springs are 1" (25.4mm) in length. 1" springs are longer than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to raise the trem arm.
      Starting at $7.95
      P-GB-SCREW-1X Screw - Bigsby, Regular #125, Hinge
      Colors Available:
      Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.
      Starting at $2.15
      P-GB-BUSHING-1 Bridge Mount Bushings - Bigsby, for Telecaster Guitar
      Genuine Bigsby replacement bridge mount bushings for use with the Bigsby Tele mounting plate. Bigsby Base Mounting Plate sold separately (P-GB-PLATE).
      $4.95
      On Backorder
      P-GB-SHIM Shim - Bigsby, 1953 Original Telecaster
      Genuine Bigsby® aluminum neck shim for use with B16 or other vibratos. This item is a replica of the original 1953 Bigsby® neck shim made for Telecasters using the B16 vibrato. These shims are made of a lightweight aluminum and raise the neck 3/16" for a proper angle to work with the floating bridge. The shim is not drilled. Bigsby suggests using a 3/8" drill bit.
      $26.95
      P-GB-NUT Nut - Bigsby, Handle, genuine replacement
      Genuine Bigsby® replacement nut for vibrato handle.
      $1.95
      On Backorder
      P-GB-BRIDGE-6 Bridge - Bigsby, Telecaster new style
      Genuine Bigsby® new style Telecaster bridge for use with Bigsby vibratos. This bridge assembly is an alternative bridge with notched saddles for the B16 vibratos.
      $48.95
      On Backorder
      P-GB-HANDLE-8X Handle - Bigsby, flat 9 ½" handle with stud
      Colors Available:
      Genuine Bigsby® replacement flat handle with pre-installed stud. This 9.5" flat handle is longer than the stock handle used on most Kalamazoo Series vibratos.
      Starting at $51.64
      P-GB-PLATE Bridge Plate - Bigsby, for Telecaster Guitar
      Genuine Bigsby® Telecaster® plate for use with B5 vibratos. Standard Telecasters will require modifications for use with this plate. Five mounting wood screws included. Bridge sold seperately.
      $36.95
      P-GB-STUD-1X Handle Stud - Bigsby, genuine replacement
      Colors Available:
      Genuine Bigsby® replacement handle stud.
      Starting at $4.65
      P-GB-BRIDGE-3 Bridge - Bigsby, Tele, Adjustable, 2 Bushings
      The Bigsby Adjustable Tele Bridge is chrome plated and comes complete with 2 mounting bushings. It was designed for use with Telecaster guitars, but may be used on other similar models. Intonation on this bridge is individually adjustable for each string directly at each saddle. The threaded saddle design allows strings to be positioned where you want on the neck of your guitar. Note: Requires drilling insert holes. Bigsby Base Mounting Plate sold separately (P-GB-PLATE).
      $49.95
      P-GB-SHAFT-1X Anchor Bar - Bigsby, string-mount for vibrato
      Colors Available:
      Genuine Bigsby anchor bars for vibrato units. Anchor bars are also referred to as pivot bars and string shafts.
      Starting at $23.75
      P-GB-SPRING-3 Guitar Part - Bigsby, Spring, Handle
      • Genuine Bigsby® Vibrato Handle Pivot Spring.
      • Diameter is 0.37 in. Height is 0.359 in.
      • Used for handle pivot resistance.
      • Located on underside of pivot joint on handle between the pivot nut and the handle.
      • Not to be confused with a "Tension Spring".
      • Picture is enlarged to show detail.
      • Bigsby Part# 0495-1960
      $3.75
      P-GB-BRACKET-3X Bracket - Bigsby, Flat Handle Bracket
      Colors Available:
      Genuine Bigsby® flat handle bracket for use with Bigsby vibrato units. Includes set screw for mounting to vibrato. Arm and other hardware sold seperately.
      Not compatible with Lightning Series vibratos.
      For handles see P-GB-HANDLE-1X.
      For 9.5" handles see P-GB-HANDLE-8X.
      For handle fiber washer see P-GB-WASHER-1.
      For handle pivot spring see P-GB-SPRING-3.
      For handle nut see P-GB-NUT.
      For complete handle assemblies see P-GB-HANDLE-6X.
      Starting at $16.95
      P-GB-BRIDGE-2 Bridge - Bigsby, Sorkin / Bowtie Assembly

      Genuine Bigsby® Sorkin bridge assembly for use with Bigsby vibrato units. The Sorkin bridge is also known as the bowtie bridge.
      2 13/16” stud spacing.

      $49.95
      On Backorder
      P-GB-HANDLE-7X Handle - Bigsby, flat vintage handle assembly
      Colors Available:
      Original Bigsby flat vintage handle assembly.
      Starting at $92.78
      Don't see what you're looking for? Send us your product suggestions!