Luthier Parts & Tools

Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)

A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Threaded thumbwheel style studs and bushings and features hard zinc saddles. Hardware included.

Designed to for use with the Telecaster® single coil pickup; this heavier brass bridge features six allen-adjustable brass saddles. Strings mount through the guitar body and all of the mounting screws are included. Hardware included.

Vintage-style chrome bridge assembly for use on most Standard, Deluxe, Roadhouse™, Lone Star™, and Blacktop Stratocaster models manufactured from 2006-present. Includes six bent "Fender"-stamped saddles, intonation screws and springs, and saddle-height adjustment screws. Mounting hardware, tremolo claw, tremolo springs and tremolo arm not included.

• 2-1/16" mounting spacing*
• Standard 10/32 tremolo arm threading
• For a variety of Stratocaster models (2006-present)

*Note that 2-1/16" bridge mounting spacing means that bridge-mounting screws will not fit vintage or vintage reissue instrument unless modified to do so.

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.

Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.

For non-tremolo fixed bridge Strat® style guitars that have through-body string mounting. Steel saddle. Saddle intonation can be individually adjusted. Mounting screws included. Hardware included.

Set of seven slotted bridge pins for use with most Fender acoustic guitars as well as other manufacturers. Includes extra bridge pin and matching strap end pin.

U.S. made vintage style ABR-1 thumbwheels. These steel thumbwheels feature high quality plating and are tapped for 6-32 threaded posts.

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

With white tip, for Mexican Standard Strat.

Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.

• Set of 12 replacement screws
• Genuine vintage specifications
• Nickel plating
• Phillips oval-head (6-32 x 7/16")
• Used on American Vintage Stratocaster® guitars

Genuine replacement arm for the Wilkinson/Gotoh VS-100N Tremolo. Internally threaded, sturdy knobless .216"-diameter (5.5mm) stainless steel; extends approximately 5-⅝" (142.88mm). Sturdy VS-100N tremolo arm. Multiple color options available.

Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.

• Set of 12 hex set screws
• For American Vintage Stratocaster and Telecaster guitars
• Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.

This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic, Deluxe, and Road Worn® Series (Mexico) instruments.

Original Fender® Stratocaster tremolo arm (also known as "whammy bar")

Set of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.

• Set of five nickel-plated steel tremolo tension springs
• For American Vintage series and Custom Shop instruments

Chrome-plated steel bridge plate for use on American Vintage, Classic and Road Worn® series Telecaster® models.

• String-through-body three-saddle design
• Mounting hardware and bridge saddles not included

Tremolo Arm, Screw-Down, Steel 5mm-0.8p

• Material: Steel 5mm
• Handle Type: Screw-down
• Thread: M5.0 - 0.8p
• Plating: Chrome
• Tip: White

Get better leverage and grip on your whammy bar by replacing the plastic tip, package of two.

If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.

High quality tremolo featuring height-adjustable saddles that lock to a hardened steel baseplate. Threaded studs and bushings, springs, spring holder, allen wrenches and adjustable-tension arm are included. Looking for a great tremolo system for better tuning stability, string energy transfer and note sustain? Then you have found it right here. Hardware included.

Gotoh 510T Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Hardware included.

U.S. made threaded posts for ABR-1 bridges. The brass posts feature a high quality plating and a #6-32 threading. Each post is 1 1/16” in length. This vintage style of post is meant to mount directly to the body of the guitar.