Luthier Parts & Tools

The V-Treb Variable Treble Bleed Circuit attaches to the bottom of any volume pot and corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Turning the trim pot clockwise increases the amount of treble bypass for a brighter sound at reduced volumes. Turning the trim pot counter clockwise reduces the amount of treble bypass for a warmer tone at reduced volumes. With the volume at 10, the V-Treb is removed from the circuit and does not affect the sound.
$10.35

Package of 12
Hex nut for Fender® potentiometers. Package of 12.
$4.45

Standard fit for most vintage American made tube amps.
$1.90

Standard fit for most vintage American made tube amps.
$1.90

Standard fit for most vintage American made tube amps.
$1.90

Bourns Mini Carbon Element, DPDT Push Pull Switch, Dual Audio, Split Shaft. ¼" watt, 300° rotation. Solder lugs.
- 17mm Body Diameter
- 300° rotation
- Power Rating: 0.1 watt
- ¼" Knurled 18-Spline Split Shaft
- DPDT Push-Pull Switch
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 150V
- Bourns Series Number PDB183-GTR21
$7.95

Bourns Audio Taper Potentiometer. Carbon Element, Split Shaft, Solder Lugs.
- 24mm Body Diameter
- ¼ watt
- 300° rotation
- ¼" Knurled 18-Spline Split Shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 250V
Starting at $2.50

Knurled split shaft, audio. 24 mm body diameter. 1/4" watt, 300° rotation. 1/4" shaft diameter. Solder lugs. 3/8" bushing.
$12.95

Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs
- 0.625" W x 0.625" L x 0.5" D
- 300° rotation
- Power Rating: ¼ watt
- ¼" Knurled 18-Spline Split Shaft
- ¾" Bushing Length
- Tolerance: ±20 %
- Very Low Noise
$8.80

Bourns Audio Potentiometer, Vintage Premium, Conductive Polymer, Solder Lugs
- 0.625" W x 0.377" L x 0.625" D
- 300° rotation
- Power Rating: ¼ watt
- Tolerance: 10 %
- ¼" Fine Knurled Split Shaft
- ⅜" Bushing Length
- J Hooks
- Specifically designed for vintage guitars
- Very Low Noise
$17.49

Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
- 17mm Body Diameter
- ¼ watt
- 300° rotation
- ¼" Knurled 18-Spline Split Shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 150V
- Series Number: PDB181-GTR
$3.05

Bourns Mini Carbon Element, DPDT Push Pull Switch, Single Audio taper Potentiometer. Split Shaft, Solder Lugs.
This Bourns Guitar Potentiometer with Push-Pull Switch allows the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
This Bourns Guitar Potentiometer with Push-Pull Switch allows the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
- 17mm Body Diameter
- 300° rotation
- Power Rating: 0.1 watt
- ¼" Knurled 18-Spline Split Shaft
- DPDT Push-Pull Switch
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 150V
$7.95

Solid shaft, audio taper. 24mm body diameter, 1/4 watt, 300 degree rotation, 1/4" shaft diameter, solder lugs, 3/8" bushing.
$2.65

Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 6mm shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
$7.95

Mini Carbon Element, Solid Shaft. Audio. Bourns Mini Guitar pots. These are drop in replacement components. Features:
- Carbon element
- 6mm Solid Shaft
- 3/8" Bushing Width
- 3/8" Bushing Length
- Tolerance: ±20 %
- Power Rating: 0.1 watt
- Maximum Operating Voltage: 150 V
- Bourns Series Number: PDB181-GT
$2.50

Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.79

Dual MN taper blend-balance with center detent. Solid shaft. 17 mm body diameter. ¼ watt, 300° rotation. 6mm shaft diameter. Solder lugs. 3/8" bushing.
$2.50

Bourns Linear Taper pots. Carbon Element, Split Shaft, Solder Lugs.
- 24mm Body Diameter
- ¼ watt
- 300° rotation
- ¼" Knurled 18-Spline Split Shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 250V
Starting at $2.50

Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
- 17mm Body Diameter
- ¼ watt
- 300° rotation
- ¼" Knurled 18-Spline Split Shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 200V
Starting at $2.80

Potentiometer - Bourns, Linear Taper, Knurled Split Shaft, Premium
$9.95

Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.
Starting at $8.80
Save 2%
Originally: $8.95

Solid shaft, linear. 24 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.65

Bourns Mini Audio Taper Guitar pots. Mini Carbon Element, SolidShaft, Solder Lugs.
- 17mm Body Diameter
- ¼ watt
- 300° rotation
- 6mm solid shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 150V
$2.25

Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications.
$8.50