Luthier Parts & Tools

Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

Pure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.

2 pole open 1/4" jack, 2 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs

3 pole open 1/4" jack, 3 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs

High quality acoustic end pin style jacks from Switchcraft. These nickel plated jacks have three conductors, a strain relief clamp, and a threaded shroud for a professional looking wiring job. The special strap nut can be removed to reveal a hex nut that can be used for external tightening of the jack.

The Switchcraft Type 112A enclosed ¼” jack is a high quality jack featuring a switched tip. This jack has three solder lugs. One for the tip, one for the sleeve, and one for the switch which connects to the tip when no plug is inserted. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer

• Type 112AX
• 0.276" bushing length (standard)
• Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
• Mono 2-Conductor
• Includes nut and washer
• Tip is shunt

Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.

Switchcraft ¼" Mono 2-Conductor Input Jack, Isolated Make Circuit (Type 13). Includes nut and washer

Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.

1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.

Switchcraft Type 12B Littel-Jax stereo phone jack. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Stereo 3-Conductor double open circuit (does not have switched terminal). Includes nut and washer.

Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.

Fender Stratocaster accessory kit. Includes Volume & Tone knobs, tremolo arm tip, switch tip, tremolo back plate, and pickup covers

Vibramate V7-LP Les Paul Adapter Mounting Kit, For Bigsby B7 - Now you can install a Bigsby Vibrato on your carved top Les Paul® guitar without drilling any holes!

Vibramate V5-TEV Stage II with FilterTron - TV Jones Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Vibramate V5-TEV Stage II with Humbucker Ash-Tray bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Vibramate V5-TEV Stage II with Shorty Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Vibramate Standard V5 Adapter Mounting Kit, For Bigsby B5, Aluminum Now you can install a Bigsby Vibrato on your guitar without drilling any holes!

Vibramate V7-335 installs in minutes with no drilling! For arch top guitars with stop tailpiece and Tune-A-Matic bridge. The E-series is for 8.0" guitars. The G-Series is for 8.5" guitars.

The Vibramate Strap Button/Pin Bushing is designed and custom manufactured in the United States for use specifically with Bigsby "Original" B7 or B3 vibratos where a spacer is desired through the Bigsby Hinge Plate for use with your Strap Button or Strap-Lock. Custom machined from high quality aluminum the Vibramate Strap Pin Bushing is designed for both clearance through the Hinge Plate slot for your Strap Button as well as providing additional clamping pressure to the tail of the guitar. Multiple color options available.

Now you can install a Bigsby Vibrato on your American Standard Telecaster® style guitar without drilling any holes! The Vibramate V5-TEAS-1 Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most American Standard Telecaster® guitars that have a 3-screw mount bridge. Vibramate The Vibramate V5-TEAS kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and mounting hardware. There is no need for drilling, soldering or removing the neck.

Now you can install your original model Bigsby Fender F logo vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for the original F logo Bigsby B5 vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The Vibramate V5-TEV Stage II kit includes mounting hardware for the Bigsby original F logo B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles. There is no need for drilling, soldering or removing the neck. The Vibramate V5-TEV Stage II automatically positions the Bigsby Vibrato, neck pickup, and bridge saddles in the proper orientation ensuring a clean, finished appearance with great performance.