Luthier Parts & Tools

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

Original Fender set of two plastic "barrel" switch tips for use on most U.S. and Mexico-made Telecaster models manufactured from 1952-present.

The new Kluson® Supreme series tuners have an 18:1 gear ratio in the traditional stamped steel housing. Designed for use on headstocks using vintage style press fit bushings. Mounting screws and bushings included.

• 6-in-line orientation
• Metal,oval button
• Safety post
• Precise 18:1 gear ratio

This zinc diecast height adjustable stop tailpiece from GOTOH features threaded adjustable studs and knurled bushings. Hardware included. Anchor bushings: M8x1.25, 25mm height.

Gotoh vintage style guitar machine heads w/staggered posts, 6-in-line.

• Vintage style slotted post
• 15:1 gear ratio
• 6-in-line orientation
• Mounting hardware included

Standard chrome cover for telecaster rhythm/neck position pickup.

• Chrome plated
• Overall measurements: 65.1mm/2.56” Length x 15.9mm/.62” Width
• Sold individually

This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic, Deluxe, and Road Worn® Series (Mexico) instruments.

1970s vintage-style neck plate with engraved "F" logo, for use on most Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.
Features:

• 1970s vintage-style neck plate
• Engraved "F" logo
• Mounting screws included
• For most Fender guitars and basses with four-screw neck mounting and no Micro-Tilt adjustment

Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.

Precision 20:1 gear ratio enclosed Bass Guitar tuners. With a 7/16"-diameter string posts and threaded hex bushings. They require a 9/16"-diameter peghole for installation. Featuring sealed lubricated, cast housings and metal knobs. Mounting screws are included. Mounting hardware included.

Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.

A specialized tool for cleanly pulling out frets. The narrow jaws are designed specifically to allow for a clean grip on frets. The special flush ground 1/2" jaws can easily bite the frets without damaging the fretboard.

Set of seven slotted bridge pins for use with most Fender acoustic guitars as well as other manufacturers. Includes extra bridge pin and matching strap end pin.

Fender Telecaster / P-Bass knurled flat-top barrel knobs in chrome.

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 4 position switch with knob and mounting hardware. Telecaster players have long debated the merits of having their pickups wired in parallel vs. in series. In the traditional parallel wiring configuration, pickup output is relatively consistent across all three positions. A Telecaster with its pickups wired in series differs in that when both pickups are on at the same time, the combination produces fatter tone and higher output.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.

Vibramate V7-LP Les Paul Adapter Mounting Kit, For Bigsby B7 - Now you can install a Bigsby Vibrato on your carved top Les Paul® guitar without drilling any holes!

Grover Vintage Tuners. 'Gibson Deluxe' Style. 3-Per-Side. Package of 6. 'Grover Deluxe' on tuners. 14:1 gear ratio This vintage machine uses a die-cast, two-piece housing for additional strength and precision. The unique bearing surface in the housing provides a rigid string post enhancing the alignment of the gear and worm. The 14:1 gear ratio provides for fine tuning.

#8 x 1.5” inch neck mounting screws. These neck mounting screws are chrome plated and are the standard screws used on many bolt-on neck guitars. Includes a full set of four Phillips screws.

Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.

Original, made in USA, covers for tele neck pickups. These premium tele covers are made of nickel silver.

Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD series solves these problems by combining "Rock-solid" technology and the post collar or: "Self-Center Guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through its use of the ideal materials selected for each component part you also obtain a far superior sound. These are 3+3 (Three on a side) configuration. Mounting hardware included. 1:15 gear ratio.

3 Position Les Paul/PRS style switch. US Retro-fit, black.

1M ohm, Solid Shaft. Original Fender. Used for Volume and Tone control in many Fender guitars as well as amplifiers.