Luthier Parts & Tools

R-VPMT-DMTX Potentiometer - PMT, Dual Mode Tone Control
The DMT is a passive dual mode guitar tone control designed specifically for electric guitars that can operate in either HIGH PASS or LOW PASS modes greatly expanding the instruments tonal possibilities without the use of a battery or active electronics. Micro switches on the circuit board provide the user the ability to select one of two different frequency ranges for both high and low pass modes. Easy installation with no capacitors or other parts needed. Replace the tone control in you guitar with one that you will actually use!
Starting at $19.50
R-VPMT-HCP Potentiometer - PMT, Humbucker Control, Coil Filters
The HCP Humbucker Control Pot is a dual mode variable coil tap selector for electric guitars and basses that eliminates the additional switches associated with coil splitting a pair of humbuckers. In TAP mode, rotating the pot counterclockwise fades from humbuckers to outer coils (neck pickup South coil & bridge pickup North coil). Pulling the HCP control up and rotating it counterclockwise fades from humbuckers to inner coils (neck pickup North coil & bridge pickup South coil). Tonal control is expanded with the unique ability to coil tap both humbuckers in varying amounts. In COIL FILTER mode, turning the HCP control applies varying amounts of a specially tuned high frequency filter to only one coil of the selected coils of the humbuckers (either North or South coils can be filtered). This makes each pickup a single coil at high frequencies and a humbucker at lower frequencies which produces a sound similar to a pair of single coils but with a stronger, fuller tone and 50% less noise than coil tapping.
$22.75
R-VPMT-VTB250X Potentiometer - PMT, V-Treb, Audio Treble Bleed, ⅜" shaft
Precision Music Technologies V-Treb – Variable Treble Bleed Bypass Circuit. Made in USA. The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced.
$15.50
R-VTOCOS-XA Potentiometer - Tocos, RV24, Audio, 10%, 6mm Shaft
Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each audio taper potentiometer includes a nut, flush washer, and lock washer.
  • 24mm diameter, single-turn potentiometers
  • Carbon film element
  • Metal shaft and bushing
  • Panel mount
  • Ear-lug solder terminals
  • 6mm diameter slotted-end solid shaft
  • 10mm bushing length
  • 10mm shaft length (extended past bushing)
  • Audio Taper
$7.95
R-VTOCOS-XL Potentiometer - Tocos, RV24, Linear, 10%, 6mm Shaft
Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each linear taper potentiometer includes a nut, flush washer, and lock washer.
  • 24mm diameter, single-turn potentiometers
  • Carbon film element
  • Metal shaft and bushing
  • Panel mount
  • Ear-lug solder terminals
  • 6mm diameter slotted-end solid shaft
  • 10mm bushing length
  • 10mm shaft length (extended past bushing)
  • Linear Taper
$7.95
S-H107-X Screw - Fender®, for Pickups and Switches
Package of 12
Original Fender 6-32 screws for use on pickups and switches.
Starting at $4.45
S-H118 Screw - Fender®, Pickup Mounting, for P-Bass & J-Bass
Package of 12
4 x 1.25, package of 12. For a variety of vintage and contemporary Precision and Jazz Bass models
$5.15
S-H136 Screws - Gretsch®, Bezel Mount, Chrome
Genuine Gretsch® screws for mounting Gretsch pickup rings to the guitar's body. These chrome oval-head wood screws come in a pack of 12.
Accessory to P-PUGRETMR-S
$4.65
P-SW51 Selector Switch - Fender®, Pickups, American Strat 5-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality 5-position pickup selector switch. Includes mounting screws, one white and one black switch tip.
$9.50
P-SLG-187X-U-X Slug - 1215 Steel, 0.187" Diameter, for Humbucker Pickups
Colors Available:
Original, made in USA, steel slugs for making humbucker pickups. These premium slugs are made of 1215 steel. These parts are made using the same materials and processes as the most sought after vintage parts.
$0.40
P-SW64 Switch - 3-Way lever for Telecaster
Oak 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$10.50
P-SW63 Switch - 5-Way lever for Stratocaster
Oak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$10.50
P-H35-242 Switch - Alpha, Slide, DPDT, Replacement for Fender®
Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.
$1.59
P-H534 Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • 1/4" mounting hole diameter
  • Three pole/double throw (3PDT)
$3.50
P-H541 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
$2.75
P-H5419 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Flatted
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.
  • 0.354" bushing length
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
$4.95
P-H5410 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
$2.75
P-H542X Switch - Carling, Mini Toggle, DPDT, 3 Position
Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs
  • DPDT ( Double Pole/ Double Throw) switch
  • 0.354" bushing length
  • 0.409” bat length
  • ¼" chassis hole diameter
  • Solder terminals
Starting at $3.10
P-H540 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$2.50
P-H5418 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Flattened
Carling mini-toggle switch, SPDT. This switch features a flattened actuator.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder Lugs
$3.75
P-H5411 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$2.79
P-H5412 Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lug
Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On
$3.89
P-H5413 Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position On/Off/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder lugs
$3.49
P-SW53 Switch - Fender®, Pickup Selector, 4-Way Telecaster Mod
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 4 position switch with knob and mounting hardware. Telecaster players have long debated the merits of having their pickups wired in parallel vs. in series. In the traditional parallel wiring configuration, pickup output is relatively consistent across all three positions. A Telecaster with its pickups wired in series differs in that when both pickups are on at the same time, the combination produces fatter tone and higher output.
$18.95
Don't see what you're looking for? Send us your product suggestions!