Luthier Parts & Tools

R-VTBX Potentiometer - Fender®, 250kΩ, Tone Control, for Tele / Strat
250 kΩ ohm. Original TBX tone control for most Strats and Teles. CTS manufactured, includes capacitor and comes in original Fender® packaging. Some instruments have a unique tone circuit that features a TBX Tone Control (Patented). The TBX (which stands for Treble Bass Expander), is a dual concentric stacked tone pot. The pot has a detent in the middle position. From 0 to 5 (at the detent), the TBX functions like a normal tone circuit with filtration through a capacitor. Advancing the knob counterclockwise from the detent position gradually filters off high frequencies, like a standard tone control. Rotate the knob clockwise from the detent position, and you add presence and brightness by allowing the pickups' natural resonance to come through. Fender part number: 099-2052-000
$12.65
S-CMPX Polish - Lizard Spit, for guitar cleaning / polishing
Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.
Starting at $3.75
P-GTNN04-FLAT Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Flat
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.
$3.95
P-GPS-2 Pickup Kit - Single Coil for Strat, White Cover
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.
$14.95
P-GRV-GP800X Strap locks - Grover, quick-release
Colors Available:
Grover Strap Locks feature the 'quick release' mechanism players want and need. This strong, yet lightweight accessory provides security along with the ability to easily remove the strap for use on another instrument or storage.
Starting at $13.39
package of 2
P-GGT-12-X Tuners - Gotoh, SG381, Schaller-style Knob, 6-in-a-line
Colors Available:
These super tuners are recognized as such around the world. The SG381 feature a 16:1 gear ratio and has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing---they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These come with a Schaller-style head and are perfect for your six-in-a-line setup. Mounting hardware included.
Starting at $31.69
package of 6
P-GTSJP-X Jack Plate - replacement for Stratocaster
Colors Available:
Replacement jack plate for Stratocasters
Starting at $4.79
P-GGT-16-X Tailpiece - Gotoh, GE101Z, Height Adjustable
Colors Available:
This zinc diecast height adjustable stop tailpiece from GOTOH features threaded adjustable studs and knurled bushings. Hardware included. Anchor bushings: M8x1.25, 25mm height.
Starting at $15.95
P-GGT-24-X Tuners - Gotoh, 35G450, Lyra-style for Classical Guitar
Colors Available:
These parts are born from GOTOH's latest, state of the art manufacturing processes. In order to breathe life into these parts and build the finest machine heads in the world, they are exquisitely finished by skilled artisians, with absolutely no compromise. The work of craftsmen on each individual part has gained the classic machine heads of the 35G series, critical acclaim and trustworthiness in the eyes of musicians all over the world. These feature a 14:1 gear ratio for great tuning stability. Mounted 3-per-plate, 2 plates. Mounting hardware included.
Starting at $18.95
package of 6
W-SC-13A ¼" Jack - Switchcraft, Mono, transfer circuit
1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.
$8.95
P-H5419 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Flatted
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.
  • 0.354" bushing length
  • 2 Position On-On
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
$6.55
P-GT10X Bushings - Kluson, ¼" bushings, for retrofitting
Colors Available:
Adapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6. These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs
Starting at $6.95
package of 6
S-T261 Fret Press Inserts - for Pressing Frets, Multiple Radiuses
Fret press inserts. 2.5” width brass inserts fit the S-T259-A and S-T260 fret press cauls. Used to press frets into guitar fret boards as an alternative to hammering.
$6.99
P-GTSB04-X Strap Buttons / Pins - Fender®, vintage
Fender® vintage strap buttons. Designed to fit most Fender instruments. All mounting hardware included.
Starting at $4.95
package of 2
S-T203 String Spacing Ruler - Steel, for marking string locations
Get accurate string spacing without the use of complicated tools with this easy-to-use String Spacing Ruler. "Mark outer string locations with pencil lines (high and low E strings on guitars), usually about 1/8" in from fingerboard edges. Turn ruler over (use marked side). With wide spacing toward bass side, narrow spacing toward treble side, find group of marks (six for guitar) which best fit your two pencil lines. Use a razor knife or thin mechanical pencil to mark the string positions through the ruler's slots.
$19.95
P-GP-COV-2C Pickup Cover - for Telecaster, Chrome
Standard chrome cover for telecaster rhythm/neck position pickup.
  • Chrome plated
  • Overall measurements: 65.1mm/2.56” Length x 15.9mm/.62” Width
  • Sold individually
$5.95
P-GGT-90 Knob - Gotoh, VK1-19 Relic, Dome, aged chrome
Set screw. Designed to replicate an "aged" look.
$5.80
S-T205 Fingerboard Guards - 2 Sizes, for protecting frets
Designed to protect the fingerboard when doing work on your frets. These shields are indispensable when doing any sort of fret work. Being only .010” thick they can bend to accommodate and fingerboard radius. Made of 304 spring stainless steel.
Comes with 2 sizes: 3-1/8" x 7/8" x .010" - 1/4 inch protection on either side of the fret, 3-1/8"" x 0.59" x .010"" - 3/8 inch protection on either side of the fret
$4.30
package of 2
P-GB5-X Vibrato - Bigsby, B5, for flat-top electric guitars
Colors Available:
New!:
The B5, sometimes referred as the Bigsby "horseshoe" is designed for flat top solid body guitars. Attaching via four screws to a guitar's top, the B5 is extremely versatile. B5s are common on many styles of guitars including SGs, Les Paul Jrs, Telecasters, and Rickenbacker 325s. Bigsby B5 Specifications
  • Model Name: B-5
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Cast
  • Manufacturing Material: Aluminum
  • Approximate Weight: 287 Grams
  • Overall Length: 4.75"/120.65mm
  • Overall Width: 3.7"/93.98mm
Starting at $149.99
P-GB7-X Vibrato - Bigsby, B7, for arch-top electric guitars
Colors Available:
New!:
Designed for use on arch top electric guitars. Bigsby B7 Specifications
  • Model Name: B-7
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 354 grams/12.5 oz.
  • Overall Length: 8 ¾" /222.3 mm
  • Overall Width: 3 5/8" /92.1 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Bigsby B7 Includes:
  • Tremolo
  • Arm Assembly
  • 6 Mounting Screws
  • Spring
  • Plastic Washer
  • Installation Instructions
Starting at $199.99
P-K350 Knob - Fender®, Telecaster / P-Bass Barrel, Chrome
Fender Telecaster / P-Bass knurled flat-top barrel knobs in chrome.
$14.65
package of 2
P-GKLU-KTS9105MN Tuner - Kluson Supreme, Oval knob, 6 in line, Nickel
The new Kluson® Supreme series tuners have an 18:1 gear ratio in the traditional stamped steel housing. Designed for use on headstocks using vintage style press fit bushings. Mounting screws and bushings included.
  • 6-in-line orientation
  • Metal,oval button
  • Safety post
  • Precise 18:1 gear ratio
$52.95
package of 6
P-H5414 Switch - Carling, Mini Toggle, SPDT, 2 Position, PC Pins, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • PC mount pins
$3.85
R-V1M-SS Potentiometer - Fender®, 1M, Solid Shaft
1M ohm, Solid Shaft. Original Fender. Used for Volume and Tone control in many Fender guitars as well as amplifiers.
$5.85
Don't see what you're looking for? Send us your product suggestions!