Luthier Parts & Tools

P-H5419 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Flatted
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.
  • 0.354" bushing length
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
$4.95
R-V38-X-RA Potentiometer - Alpha, Reverse Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.70
R-VPMT-HCP Potentiometer - PMT, Humbucker Control, Coil Filters
The HCP Humbucker Control Pot is a dual mode variable coil tap selector for electric guitars and basses that eliminates the additional switches associated with coil splitting a pair of humbuckers. In TAP mode, rotating the pot counterclockwise fades from humbuckers to outer coils (neck pickup South coil & bridge pickup North coil). Pulling the HCP control up and rotating it counterclockwise fades from humbuckers to inner coils (neck pickup North coil & bridge pickup South coil). Tonal control is expanded with the unique ability to coil tap both humbuckers in varying amounts. In COIL FILTER mode, turning the HCP control applies varying amounts of a specially tuned high frequency filter to only one coil of the selected coils of the humbuckers (either North or South coils can be filtered). This makes each pickup a single coil at high frequencies and a humbucker at lower frequencies which produces a sound similar to a pair of single coils but with a stronger, fuller tone and 50% less noise than coil tapping.
$22.75
P-COV-H492-U-X Cover - Humbucker, 49.2mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 49.2mm spacing.
Starting at $5.95
P-PUK28 Pickup - Kent Armstrong, Icon Series, Vintage 52, Tele Bridge
Kent Armstrong opened the archives for this replication of a 1952 Tele® single coil bridge pickup using authentic 42 gauge Formvar wire and alnico 3 magnets for that true vintage tone that everyone demands from the boutique winders. Finally Kent added a stainless steel base plate to ensure the magnetic field is not absorbed by a magnetic plate lessening the field strength. Now these great pickups are available to you for a fraction of the cost! Chrome covered neck position available as a partner, P-PUK29.
$52.95
P-PUFCV-3 Cover - Fender®, '57/'62 Precision Bass (P-Bass)
Package of 2
Original Fender® replacement pickup cover for 57/62 P-Bass. Pure Vintage covers let you cosmetically customize your instrument or amplifier like never before. These genuine replacement parts are created with period-correct personality in mind to the same specifications as early Fender parts, allowing players to give any Fender a shot of vintage-accurate looks and tone.
$7.50
R-VCXL-SP-L Potentiometer - CTS, Linear, Knurled Shaft, ¾" Bushing
CTS Linear, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
  • Body Diameter: 24 mm
  • Power Rating ¼” watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: 3/4"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Brass – Knurled Shaft
  • 24 teeth slot and knurled shaft
  • Includes (1) Nut and (1) Lock Washer
$4.95
P-COV-H50-U-X Cover - Humbucker, 50mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Starting at $5.95
R-VTBX Potentiometer - Fender®, 250kΩ, Tone Control, for Tele / Strat
250 kΩ ohm. Original TBX tone control for most Strats and Teles. CTS manufactured, includes capacitor and comes in original Fender® packaging. Some instruments have a unique tone circuit that features a TBX Tone Control (Patented). The TBX (which stands for Treble Bass Expander), is a dual concentric stacked tone pot. The pot has a detent in the middle position. From 0 to 5 (at the detent), the TBX functions like a normal tone circuit with filtration through a capacitor. Advancing the knob counterclockwise from the detent position gradually filters off high frequencies, like a standard tone control. Rotate the knob clockwise from the detent position, and you add presence and brightness by allowing the pickups' natural resonance to come through. Fender part number: 099-2052-000
$12.65
P-GP-COV-2C Pickup Cover - for Telecaster, Chrome
Standard chrome cover for telecaster rhythm/neck position pickup.
  • Chrome plated
  • Overall measurements: 65.1mm/2.56” Length x 15.9mm/.62” Width
  • Sold individually
$5.70
W-SC-W09 Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated)
Outside Diameter:5/8"
Inside diameter threading:15/32"
Width: 3/32"
$1.55
W-RN-11X ¼" Jack - Rean, Mono, Open Circuit
2 pole open 1/4" jack, 2 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs
Starting at $1.25
R-VCXA-SP14 Potentiometer - CTS, Audio, Knurled Shaft, ¼" Bushing
CTS pots with a shorter ¼” bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.
The Series 450G Guitar Potentiometer is the same robust high-quality guitar potentiometer that has become the industry standard for top guitar manufacturers. Featuring reduced shaft wobble, low noise output, and smooth rotational feel, the Series 450G is supplied with standard tin-plated rear cover and solder lug terminals.
$4.50
R-V500K-SS Potentiometer - Fender®, 500kΩ, Audio, Solid Shaft
500K ohm (audio taper), solid shaft. Made in Taiwan.
$6.95
R-VPMT-VTB250X Potentiometer - PMT, V-Treb, Audio Treble Bleed, ⅜" shaft
Precision Music Technologies V-Treb – Variable Treble Bleed Bypass Circuit. Made in USA. The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced.
$15.50
S-H138-U-N Wood Screw - #3 x 1-3/8”, Phillips, Round Head
Original, made in USA, #3 x 1-3/8” wood screws. These premium screws are nickel plated and are perfect for pickups that are directly mounted to the guitar body such as P-90 and Thunderbird pickups.
$0.30
P-PUK29 Pickup - Kent Armstrong, Icon Series, Vintage 52, Tele Neck
Kent Armstrong opened the archives for this replication of a 1952 Tele® single coil neck pickup using authentic 43 gauge Formvar wire and alnico 3 magnets for that true vintage tone that everyone demands from the boutique winders. Now these great pickups are available to you for a fraction of the cost! Traditional 52' recipe bridge pickup available as a partner, P-PUK28.
$52.95
P-PUGRETMR-S Pickup Mounting Ring - Gretsch, FilterTron, Silver
Gretsch® Original Filtertron Pickup Ring, for bridge or neck.
$7.50
P-PUF60 Pickup - Fender®, Precision Bass, Set of 2
Package of 2
Precision Bass, Set of 2.
The bass pickup that invented "funk" is still virtually unchanged today with the Original Precision Bass pickup. Made with Alnico 5 magnets, enamel-coated magnet wire, and a copper shield. An accurate reproduction of the 1962 Precision Bass pickup, this split-coil humbucking pickup delivers powerful bass and clear high-end. From vintage bobbin construction to genuine original-era cloth wiring, all Fender Pure Vintage pickups are wound to precise specifications for authentic, traditional Fender tone and performance.
  • DC Resistance: 10.5k
  • Inductance: 6.4 H
$95.95
P-COV-P90S-U-X Cover - P-90, Soap Bar, 49.2mm, Butyrate, USA
Colors Available:
Original, made in USA, covers for soap bar P-90 pickups. These premium P-90 covers are made of butyrate and have a 49.2mm spacing.
Starting at $10.85
S-HRVLW Washer - Fender®, Lock Type, for Potentiometers
Package of 12
Lock washer for Fender® potentiometers. Package of 12.
$4.45
P-GP100X Pickup Part - Black Bobbin, 7-string
Black humbucker screw or slug side bobbin for building or repairing 7-string pickups. Compatible with our 7-string baseplate (P-GP-PLATE-3). 61.2mm/2.40” pole spacing(outer holes center to center
$2.40
P-GCOV-21 Cover - Fender®, for Vintage J-Bass, Chrome
Original Fender® pickup cover for vintage J-bass, chrome.
$12.55
R-VC-ML Potentiometer - CTS, Linear, Solid Shaft
CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.
  • Body Diameter: 24 mm
  • Power Rating ⅓ watt
  • Bushing Diameter: ⅜" (Threading: 3/8-32)
  • Bushing Length: ¼"
  • Shaft Diameter: ¼"
  • Shaft Length: ⅜"
  • Shaft Material: Aluminum - Solid Shaft
  • Includes (1) Nut and (1) Lock Washer
$3.75
Don't see what you're looking for? Send us your product suggestions!