Luthier Parts & Tools

Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.

Blank pickguard material sheets for cutting custom pickguards, truss rod covers, and back plates. These sheets come in a variety of colors as well as single ply and three ply options. All colors feature a gloss surface.

Original, made in USA, #2 x ½” wood screws. These premium screws are made of raw brass and are perfect for mounting bobbins to baseplates. These are reproductions of the PAF style mounting screws.

Gibson style top hat knob. Fits fine knurled pot shafts.

Alnico cast bar magnets for use in humbucker and P-90 pickups. These are fully magnetized through the width and measure 2.444” x .5” x .125”.

A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Threaded thumbwheel style studs and bushings and features hard zinc saddles. Hardware included.

Pure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

250K ohm, audio taper. for most Stratocasters and Telecasters. Original guitar hardware. CTS manufactured, includes capacitor. Comes in Fender ® packaging.

Tele style control plate. 5.9” plate mounting center distance (0.123” diameter, recessed).

• Two potentiometer mounting holes for 3/8” bushing diameters
• One standard selector switch mounting slot (1.63” mounting center distance, 0.15” diameter, recessed)
• Made in Korea

Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 6mm shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.

Original Fender set of two pickup switch tips for use on most U.S. and Mexico-made Stratocaster® models.

Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 2-Position On/On
• ¼" mounting hole diameter
• Single pole/Double throw (SPDT)
• PC mount pins

Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.

High quality acoustic end pin style jacks from Switchcraft. These nickel plated jacks have three conductors, a strain relief clamp, and a threaded shroud for a professional looking wiring job. The special strap nut can be removed to reveal a hex nut that can be used for external tightening of the jack.

This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!

Solid tinned copper bus wire. 105°C temperature rating, 600V.

Fits .237" solid shaft pots. Set screw, .75" diameter, .73" height. Fits on Bourns miniature solid shaft pots.

These parts are born from GOTOH's latest, state of the art manufacturing processes. In order to breathe life into these parts and build the finest machine heads in the world, they are exquisitely finished by skilled artisians, with absolutely no compromise. The work of craftsmen on each individual part has gained the classic machine heads of the 35G series, critical acclaim and trustworthiness in the eyes of musicians all over the world. These feature a 14:1 gear ratio for great tuning stability. Mounted 3-per-plate, 2 plates. Mounting hardware included.

This zinc diecast height adjustable stop tailpiece from GOTOH features threaded adjustable studs and knurled bushings. Hardware included. Anchor bushings: M8x1.25, 25mm height.

Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.

• 0.354" bushing length
• 1/4" mounting hole diameter
• On-On Three pole/double throw (3PDT)

Original Fender pickguard screws. Set of 24 Phillips head screws (4x1/2") for pickguard and control plate mounting on most Fender instruments.

Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.

Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 49.2mm spacing.