Luthier Parts & Tools

Set of 6 Ratio InvisoMatch standard installation plates, designed for easy installation of Ratio Calibrated Machine Heads. These have the modern Fender style two-pin mounting system (slightly larger than the Ratio two-pin mount). Use your guitar's existing mounting holes for a fast, perfect Ratio Installation.
$9.31

Colors Available:
Starting at $84.70
package of 6

Set of six String Saver Classics for a Strat or Tele style guitar with a 2 3/16" string spacing. Features a brushed stainless steel finish. They have a small String Saver insert in the saddle to dramatically reduce string breakage and improve tuning stability. Included with the set is an extra set of slightly longer intonation screws to be used with a Telecaster along with a hex key to adjust the saddle heights. String Saver saddles are made with a unique combination of materials made to enhance tone and dramatically reduce string breakage.
$74.76

Replacement chrome tailpiece for Les Paul style guitars and others. M8 * 12.5 thread studs (anchor bushings included). Made in Korea.
$17.45

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Intonation Large pitch deviation in early frets. (See intonation graph below) Minimal pitch deviation in early frets.
$24.00

This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.
- Length = 2 1/64 inches (51.25mm)
- Height = 11/64 inches (4.55mm)
- Thickness = 1/8 inch (3.1mm)
$4.55

Vintage style diagonal mount tuning machine set featuring a solid metal Schaller-style knob and are finished in chrome. These stamped tuners feature a classic diamond shaped back cover that can be removed for a more traditional look. The gear ratio is 15:1. All mounting hardware is included in this six in a line tuner set.
$23.65

Sealed diecast tuning machine set with a standard 45° mounting screw and solid metal oval buttons. This chrome finished configuration looks classic on both electric and acoustic guitars. The gear ratio is 15:1. All mounting hardware is included in this three per side tuner set.
$23.95

Colors Available:
Starting at $119.95

Vibramate V5-TEV Stage II with FilterTron - TV Jones Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.
$99.95

Vibramate V5-TEV Stage II with Humbucker Ash-Tray bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.
$99.95

Vibramate V5-TEV Stage II with Shorty Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.
$99.95

Fits SKU# P-GB500-X Now you can install a Bigsby Vibrato on your guitar without drilling any holes!
$59.95

Colors Available:
$28.01
Save 15%
Originally: $32.95

Slightly hotter than the 54 models, these recreations of the 1957 Strat® single coil pickups deliver a true vintage tone not available until now. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.
- Magnet Type = Alnico 3 pole pieces
- D.C. Resistance = 5.92k Ohms
- Inductance (henrys) = 3.61
- Wire Type = Formvar AWG 42
- Lead Type = cloth insulated 2 conductor
- Polarity = normal
Starting at $56.95

Single P-90 pickup for bridge position with a cream colored plastic cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating!
$57.25

High quality made in Japan spoon-shaped gouges for luthier work. These gouges have a hardness of HRC64 and a total length of 180mm. The hardwood handle features a flat end for hammering and a decorative handle. The blade material is Shiragami white steel.
Starting at $26.37

75 x 150mm diamond self-adhesive sheets, for S-T229-X sanding blocks.
Starting at $22.45

Made in Japan. Files specially designed for fret dressing and fret end work. Used for rounding fret ends and deburring. The hard chrome coating used on these files allows for use on both standard fret materials as well as stainless steel frets.
- Size Medium = 2mm radius for medium frets.
- Size Jumbo = 3mm radius for jumbo frets.
$46.95

Single '57/'62 Strat single coil pickup. Reverse engineered, these pickups deliver the original vintage Stratocaster sound, feel, and vibe! This is pure and original Strat tone. The staggered beveled-edge Alnico 5 magnets with Formvar wire produce glistening highs and warm lows that are unquestionably vintage. These pickups feature special beveled edge Alnico 5 magnets and enamel-coated magnet wire.
This pickup is sold individually.
This pickup is sold individually.
- DC Resistance: 5.6k
- Inductance: 3 H
$64.95
Out of Stock

Made with the same materials and specifications of an early 1950s Telecaster pickup, the Original Vintage Telecaster speaks with extremely accurate vintage Tele twang. Made with AlNiCo 3 magnets, enamel coated magnet wire these pickups duplicate the warmth and edge that you'd come to expect from Fender®.
$79.95
Out of Stock