Luthier Parts & Tools

Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs

• 0.625" W x 0.625" L x 0.5" D
• 300° rotation
• Power Rating: ¼ watt
• ¼" Knurled 18-Spline Split Shaft
• ¾" Bushing Length
• Tolerance: ±20 %
• Very Low Noise

MicroTilt disk bolt, 1/4-28 x 1⁹⁄_16". Genuine Fender® 3 bolt neck micro tilt adjust mounting bolt. This bolt goes in the lower location in the Fender 3-bolt neck plate. This bolt is secures your neck angle adjustment once you have made your neck tilt angle change with the set screw.

Small flat chisel with an offset handle allowing this tool to easily get into tight spaces for luthier work. The 1.1mm blade is made of high quality HSS steel and is perfect when precision is required for nut slots and elsewhere. Made in Japan.

600 grit diamond-plated file. 3 different, (small, medium, large) radiuses in one file. 130mm file length, 230mm total.

Retrofit your pre-CBS Fender equipped with reverse winding Kluson tuning machines for drop tuning. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.

Original, made in USA, covers for mini humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.

Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with plated brass saddles. Mounting hardware sold separately. The bridge features the vintage-style retaining wire that secures the plated brass saddles and intonation screws onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

Original Bigsby flat vintage handle assembly.

Designed for use on arched top electric guitars Bigsby B16 Specifications

• Model Name: B-12
• Series: Original Kalamazoo Line
• Manufacturing Method: Sand Cast
• Manufacturing Material: Aluminum
• Approximate weight: 344 grams/12.1 oz.
• Overall Length: 8 3/8" / 212.7 mm
• Overall Width: 3 5/8" / 92.1 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

This is the left-handed version of the Bigsby B3 designed for use on thin electric hollow and semi-hollow guitars. Mounting screws, arm spring, and washer included.

Designed for use on thin hollow body and semi-hollowbody guitars. Bigsby B30 Specifications

• Model Name: B-30
• Series: Licensed Line
• Manufacturing Method: Die Cast
• Manufacturing Material: Aluminum
• Approximate weight: 296 grams/10.4 oz.
• Overall Length: 7 ½"/190.5 mm
• Overall Width: 3 ¾"/95.3 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Bigsby B5 kit for Telecaster® guitars. This kit includes every part required to fit a B5 to a standard Telecaster® using the Bigsby bridge and bridge plate. The B5, sometimes referred to as the Bigsby "horseshoe" is designed for flat top solid body guitars and attaches via four screws to a guitar's top. The B5 is an extremely versatile vibrato unit. Includes

• Complete B5 Tailpiece with Mounting Hardware
• Bigsby Telecaster Bridge Plate with Studs and Anchors
• Bigsby Telecaster Bridge with Mounting Hardware

Bigsby B5 Specifications

• Model Name: B-5
• Series: Original Kalamazoo Line
• Manufacturing Method: Cast
• Manufacturing Material: Aluminum
• Approximate Weight: 287 Grams
• Overall Length: 4.75"/120.65mm
• Overall Width: 3.7"/93.98mm

Note: Some drilling is required.

Designed for use on arched top electric guitars Bigsby B70 Specifications

• Model Name: B-70
• Series: Licensed Line
• Manufacturing Method: Die Cast
• Manufacturing Material: Aluminum
• Approximate weight: 358 grams/ 12.6 oz.
• Overall Length: 8 11/16"/ 220.7 mm
• Overall Width: 3 ¾"/95.3 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Original Fender® pickup cover for '51 P Bass/Tele Bass, chrome.
Features:

• Vintage-style chrome bridge cover
• For vintage-style '51 Precision Bass
• Mounting hardware not included

Gotoh’s FB30 tuners are an excellent set for any bass guitar. This tuning machine set offers Gotoh’s high quality build standards in a vintage style bass tuner. These tuners feature clover tuning keys, a 20:1 gear ratio, Gotoh’s inner friction free ring, and a classic styled footprint. Mounting screws and press fit bushings are included with this set.

This bridge features an artistic acanthus flower engraving that adds a custom look to Telecaster guitars. Designed for use with a Telecaster® single coil pickup, this bridge includes six adjustable chrome-plated brass saddles, and features a string-through design. The Gotoh Luxury-Mode series includes stylized parts made with an ultra fine, high-speed carving technology. These parts are replacements that can enhance the appearance of any guitar. Four mounting screws and a hex key for the saddle adjustments are included with this bridge plate.

Non-direct replacement tuners for vintage and vintage reissue Fender® basses. Similar in style to the original Fender tuners but the footprints are different. New holes will be needed to install if retrofitting to a Fender® instrument. Complete with bushings and mounting screws. Mounting hardware included. Reverse wind. ​

Direct Drop-in compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's Res-O-Lite machine heads are extremely light weight (59.2 grams each) from aluminum alloy to make for a less neck heavy bass. Features a 26:1 Gear Ratio. 2+2 config, fits many Standard American and Mexican basses. Also the key post can be removed and replaced on opposing side.Comes in 2+2 configuration. Mounting hardware included.

Finding the right aftermarket tuners that match up with your guitar's mounting hole pattern can be a guessing game and if your new tuners don't match, you're stuck drilling new holes, filling the old holes and screwing in the new tuners. That's why Hipshot made the UMP™ (Universal Mount Plate). The UMP™ is a patent pending adapter plate that fits between your Hipshot tuners and the headstock of your guitar. Tabs on the face of the plate prevent the tuners from slipping against the headstock. At the same time, reach nuts inserted through the existing headstock holes into the tuners keep the whole assembly securely in place.

Pair of standard stop bar anchor bushings for stud mounts with fine knurling and fits most guitars using a 0.986” body depth for the anchors. Made from zinc. Pairs with P-GKLU-KLP1099X studs. Studs sold separately.

U.S. made and true to vintage specifications. Lightweight (35 grams) aluminum for added resonance. Steel studs included.
The aluminum wrap around bridge is true to vintage specifications. Made from light-weight aluminum to increase string definition and resonance on those instruments using darker tone woods like mahogany, while reducing weight. Each side is adjustable using the included hex set screws to dial in the intonation. Studs and hex wrench included.

The PQ-6116-00 is the perfect option to replace and upgrade the nut on your acoustic or electric guitar. It is pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.707 in. (43.36mm)
• Width - 0.192 in. (4.88mm)
• Height - 0.331 in. (8.41mm)
• E to E - 1.435 in. (36.45mm)

The ResoMax 4mm bridge is made from Graphtech’s ResoMax alloy. ResoMax is lightweight, high strength, and full of harmonics that will leave your guitar dripping with tone. It comes preloaded with String Saver saddles to reduce string breakage and improve tuning stability. All ResoMax bridges feature Graphtech’s patented magnetic lock to the steel posts that come with it. 4mm posts are used in a lot of American and European-built guitars, and brands such as Gibson, Godin, and Duesenberg. Please see the measurement guide to verify compatibility. The ResoMax NV2 is loaded with Graphtech’s Patented String Saver Saddles. These saddles are impregnated with PTFE and will dramatically reduce string breakage and improve tuning performance.

The PRL-8721 are a right-handed set of Locking RATIO® Calibrated Machine Heads for electric guitars that use 6-in-line tuners. This set has mini Schaller-style knobs. The tuners have a two pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates. 4 different sets of InvisoMatch mounting plates in brushed aluminum are included to make installation on most guitars fast and accurate by using your existing screw mounting holes. RATIO® is Graphtech’s patented gear technology. RATIO® Calibrated Machine Heads incorporate different string gauges into the tuning equation.

• From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.

Graphtech balanced the gear ratios to each string simplifying the tuning process. With RATIO®, a half turn is a semitone. Every string reacts the same to any tuning adjustment.