Luthier Parts & Tools

P-GTNN13 Nut - Fender®, Pre-slotted, Bone, for Tele and Strat
Original Fender pre-slotted bone nut for Teles and Strats.
$15.85
P-GNUT-TUSQ-EPS-1XL Nut - Tusq XL, Pre-slotted, Strat and Tele Style
The PQL-5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to it's ingenious design.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.687 in. (42.85mm)
  • Width - 0.128 in. (3.25mm)
  • Height - 0.198 in. (5.03mm)
  • E to E - 1.363 in. (34.62mm)
$12.71
P-GTNN06-SLOT Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
P-GTNN10 Nut - Plastic construction, for Stratocaster
Stratocaster guitar nut - plastic construction
$1.95
P-GTNN12 Nut - Fender®, Pre-slotted, Melamine, for Tele and Strat
Genuine Fender® pre-slotted melamine nut for Telecaster and Stratocaster guitars. This nut has 9 1/2 in. top radius and 7 1/4" bottom radius with an overall length of 1.695 in.
$8.45
P-GTNN-ZSX Nut - Gold Tone, Zero Guide Slotted
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.
Starting at $24.00
P-GTNN09 Nut - Plastic, for Electric Guitars
Plastic electric guitar nut.
$1.95
P-GTNN14 Nut - Original Fender, Pre-Slotted Brass, for Strat / Tele
High-quality solid-brass string nut as used on the Yngwie Malmsteen Stratocaster®, for use with Stratocaster and Telecaster® guitars. Designed for 9.5"-radius fingerboards and pre-slotted with string location grooves to simplify spacing and positioning during final slot filing. Note that some filing and shaping modifications may be required to ensure proper fit and performance. • High-quality solid-brass string nut • For 9.5" fingerboard radius • Pre-slotted • 9.5" (241mm) top and bottom radius • 1.620” (41.15mm) wide
$14.95
P-GNUT-TUSQ-EPS-5XL Nut - Tusq XL, Pre-slotted, Epiphone Pre 2014
The PQL-6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.730 in. (43.94mm)
  • Width - 0.239 in. (6.08mm)
  • Height - 0.357 in. (9.08mm)
  • E to E - 1.344 in. (34.14mm)
  • Radius - 15 in.
$12.71
P-GTNN11 Nut - Fender®, LSR Roller for stabilizing tuning
LSR roller nut reduces friction that can cause tuning instability. Comes with instructions, mounting hardware and Wilkinson® adapter for older Strat® Plus models. Used on American Deluxe HSS guitars. Kit Includes: LSR Nut, Shims, Mounting Screws and Bezel Adapter (for Retrofitting to Wilkinson® Nut Equipped Guitars) Will Accommodate String Gauges from .008 to .056. Some modification may be required.
$37.95
P-GTNN03 Nut - Fender®, replacement for American standard P-Bass
Fender® replacement string nut for American Standard Precision Bass
$7.25
P-GNUT-TUSQ-APS-1 Nut - Tusq , Pre-slotted, Acoustic / Electric, 1 11/16”
The PQ-6116-00 is the perfect option to replace and upgrade the nut on your acoustic or electric guitar. It is pre-slotted to make for a quick and easy install. Dimensions:
  • Length - 1.707 in. (43.36mm)
  • Width - 0.192 in. (4.88mm)
  • Height - 0.331 in. (8.41mm)
  • E to E - 1.435 in. (36.45mm)
$11.60
P-GNUT-TUSQ-EPS-2 Nut - Tusq, Pre-slotted, Jumbo, Gibson Style
The PQ-6000-00 is a great option to upgrade the nut on your Gibson style electric guitar. It is pre-slotted for a quick and simple install. Dimensions:
  • Length - 1.713 in. (44.07mm)
  • Width - 0.196 in. (4.98mm)
  • Height - 0.329 in. (8.36mm)
  • E to E - 1.398 in. (35.52mm)
$11.60
P-GNUT-TUSQ-EPS-4XL Nut - Tusq XL, Pre-slotted, Gibson Post 2014
The PQL-6011-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made post-2014. It is slightly taller than the P-GNUT-TUSQ-EPS-3XL (pre 2015). When in doubt, use this one, you can always sand the bottom of the nut to adjust lower.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.725 in. (43.83mm)
  • Width - 0.185 in. (4.69mm)
  • Height - 0.405 in. (10.30mm)
  • E to E - 1.408 in. (35.77mm)
$12.71
P-GNUT-TUSQ-EPS-3XL Nut - Tusq XL, Pre-slotted, Gibson Pre 2014
The PQL-6010-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made before 2014. It is pre-slotted to make for a quick and easy install.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.718 in. (43.64mm)
  • Width - 0.193 in. (4.90mm)
  • Height - 0.371 in. (9.41mm)
  • E to E - 1.397 in. (35.47mm)
  • Radius - 18 in.
$12.71
P-GNUT-TUSQ-APS-2 Nut - Tusq , Pre-slotted, Acoustic, Martin Style, 1 3/4”
The PQ-M644-00 is the perfect option to replace and upgrade the nut on your Martin style acoustic guitar. It has an angled bottom and comes pre-slotted to make for a quick and easy install. Dimensions:
  • Length - 1.745 in. (44.32mm)
  • Width - 0.224 in. (5.69mm)
  • Height - 0.361 in. (9.17mm)
  • E to E - 1.418 in. (36.02mm)
$11.60
P-GNUT-TUSQ-APS-3 Nut - Tusq , Pre-slotted, 6 String Acoustic
The PQ-1720-00 is the perfect option to upgrade the nut on your six string guitar. It is pre-slotted for a quick and simple install. It is a very common nut used in the Godin family of guitars.
Dimensions:
  • Length - 1.695 in. (43.05mm)
  • Width - 0.204 in. (5.18mm)
  • Height - 0.403 in. (10.24mm)
  • E to E - 1.415 in. (35.93mm)
$11.60
P-GNUT-TUSQ-EPS-3 Nut - Tusq, Pre-slotted, Gibson Pre 2014
The PQ-6010-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made before 2014. It is pre-slotted to make for a quick and easy install.
Dimensions:
  • Length - 1.718 in. (43.64mm)
  • Width - 0.193 in. (4.90mm)
  • Height - 0.371 in. (9.41mm)
  • E to E - 1.397 in. (35.47mm)
  • Radius - 18 in.
$11.60
P-BNUT-TUSQ-EPS-2XL Nut - Tusq XL, Pre-slotted, for Jazz Bass
The PQL-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.554 in. (39.47mm)
  • Width - 0.128 in. (3.25mm)
  • Height - 0.187 in. (4.75mm)
  • E to G - 1.223 in. (31.06mm)
$12.71
P-BNUT-TUSQ-EPS-1XL Nut - Tusq XL, Pre-slotted, for Precision Bass
The PQL-1204-00 is the perfect option to upgrade the nut on your Fender Precision style Bass guitar. It is pre-slotted making installation quick and simple.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.65 in. (41.91mm)
  • Width - 0.125 in. (3.17mm)
  • Height - 0.187 in. (4.75mm)
  • E to G - 1.25 in. (31.75mm)
$12.71
Don't see what you're looking for? Send us your product suggestions!