Pictured: Red
Pictured: Green
Pictured: Blue
Pictured: Blue/Green
Pictured: Red/Green
Pictured: Red/Blue
Pictured: Red
Pictured: Green
Pictured: Blue
Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
LED - Footswitch Ring, With Bezel, 9V
Leaded LED rings for use with standard footswitches. These LED rings use an array of LEDs with internal current limiting so no additional parts are required for use with 9VDC. Red, green, blue, and two-color combinations are available. A 15mm panel hole is required. See full dimensions below to check footswitch compatibility.
RoHS Compliant
| Color | Our Part Number | UPC/EAN |
|---|---|---|
| Blue | P-LRING-B | 841358112898 |
| Blue/Green | P-LRING-BG | 841358112942 |
| Green | P-LRING-G | 841358112904 |
| Red | P-LRING-R | 841358112911 |
| Red/Blue | P-LRING-RB | 841358112935 |
| Red/Green | P-LRING-RG | 841358112928 |
| Bezel Inner Lip Diameter | 14.8mm | |
| Bezel Outer Diameter | 20mm | |
| Bezel Outside Thickness | 2mm | |
| Bezel Total Thickness | 3.4mm | |
| Inner Diameter | 12mm | |
| Length with Wire Mount | 24.1mm | |
| Outer Diameter | 21mm | |
| Thickness | 4mm | |
| Voltage | 9VDC | |
| Wire Mount Thickness | 3.2mm | |
| Wire Mount Width | 9.7mm |
| Packaging Dimensions | 0.945 in. × 0.852 in. × 0.255 in. | |
| Weight (Packaging) | 0.005 lbs. |
| P-LRING-B - Blue version | Bezel Inner Lip Diameter | 14.8mm |
| Bezel Outer Diameter | 20mm | |
| Bezel Outside Thickness | 2mm | |
| Bezel Total Thickness | 3.4mm | |
| Inner Diameter | 12mm | |
| Length with Wire Mount | 24.1mm | |
| Outer Diameter | 21mm | |
| Thickness | 4mm | |
| Voltage | 9VDC | |
| Wire Mount Thickness | 3.2mm | |
| Wire Mount Width | 9.7mm | |
| P-LRING-BG - Blue/Green version | Bezel Inner Lip Diameter | 14.8mm |
| Bezel Outer Diameter | 20mm | |
| Bezel Outside Thickness | 2mm | |
| Bezel Total Thickness | 3.4mm | |
| Inner Diameter | 12mm | |
| Length with Wire Mount | 24.1mm | |
| Outer Diameter | 21mm | |
| Thickness | 4mm | |
| Voltage | 9VDC | |
| Wire Mount Thickness | 3.2mm | |
| Wire Mount Width | 9.7mm | |
| P-LRING-G - Green version | Bezel Inner Lip Diameter | 14.8mm |
| Bezel Outer Diameter | 20mm | |
| Bezel Outside Thickness | 2mm | |
| Bezel Total Thickness | 3.4mm | |
| Inner Diameter | 12mm | |
| Length with Wire Mount | 24.1mm | |
| Outer Diameter | 21mm | |
| Thickness | 4mm | |
| Voltage | 9VDC | |
| Wire Mount Thickness | 3.2mm | |
| Wire Mount Width | 9.7mm | |
| P-LRING-R - Red version | Bezel Inner Lip Diameter | 14.8mm |
| Bezel Outer Diameter | 20mm | |
| Bezel Outside Thickness | 2mm | |
| Bezel Total Thickness | 3.4mm | |
| Inner Diameter | 12mm | |
| Length with Wire Mount | 24.1mm | |
| Outer Diameter | 21mm | |
| Thickness | 4mm | |
| Voltage | 9VDC | |
| Wire Mount Thickness | 3.2mm | |
| Wire Mount Width | 9.7mm | |
| P-LRING-RB - Red/Blue version | Bezel Inner Lip Diameter | 14.8mm |
| Bezel Outer Diameter | 20mm | |
| Bezel Outside Thickness | 2mm | |
| Bezel Total Thickness | 3.4mm | |
| Inner Diameter | 12mm | |
| Length with Wire Mount | 24.1mm | |
| Outer Diameter | 21mm | |
| Thickness | 4mm | |
| Voltage | 9VDC | |
| Wire Mount Thickness | 3.2mm | |
| Wire Mount Width | 9.7mm | |
| P-LRING-RG - Red/Green version | Bezel Inner Lip Diameter | 14.8mm |
| Bezel Outer Diameter | 20mm | |
| Bezel Outside Thickness | 2mm | |
| Bezel Total Thickness | 3.4mm | |
| Inner Diameter | 12mm | |
| Length with Wire Mount | 24.1mm | |
| Outer Diameter | 21mm | |
| Thickness | 4mm | |
| Voltage | 9VDC | |
| Wire Mount Thickness | 3.2mm | |
| Wire Mount Width | 9.7mm |
 Dimensions | All Models |
My Project Lists
Specifications, Files, and Documents
Dimensions Questions and Answers
Click each question to see its answers.
1 answers
I assume that no resistor is required as none are listed in the specs.
Asked by Anonymous on July 17th, 2020.
July 20th, 2020
Staff Member
No additional parts are required. The LED ring has built in current limiting for use with 9VDC.
1 answers
What is the recommended way to route the wiring? do you drill another hole or are the wires bent and then run the through the extra couple mm in the switch hole?
Asked by Anonymous on November 26th, 2020.
December 2nd, 2020
Staff Member
The LED ring is meant to mount onto the footswitch and sit inside the chassis. The bezel ring mounts on the top beneath the switches nut and allows the light to pass through to the outside.
1 answers
Will this work with A/C power, in a hardwired 2 button footswitch? 1st button switches channels, 2nd engages boost.
Asked by StacyF on December 3rd, 2020.
December 3rd, 2020
Staff Member
These are meant to be powered with 9VDC voltage.
Customers who purchased this item also bought
Product Reviews
I like these things...saves me drilling a hole for the LED and saves adding the CLR for the LED - these don't require a CLR.
I still use the old school LED's when I want more color selection.