Knobs

High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.

• Height: 0.50 in.
• Length: 1.13 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. The small 1400 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals and audio equipment such as the Pultec EQP-1A.

• Height: 0.38 in.
• Length: 0.84 in.
• Fits ¼" shaft with set screw

• Fits ¼" Solid Shafts (Set Screw)
• Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
• Brass Set Screw and Insert
• High Quality Plastic

Raised plastic chickenhead knob with brass insert and set screw. 1.20" in length. Davies 2300 clone.

Small plastic knobs with set screw and brass insert. Similar to the small knobs used on many Dunlop / MXR pedals. These knobs have a fluted grip with an indicator line as well as a dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts.

Large plastic knobs with set screw and brass insert. Similar to the knobs used on many classic Dunlop / MXR pedals. These knobs have a fluted grip with an indicator line as well as a dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts.

Small phenolic pointer knobs with a set screw and brass insert. These distinctive pointers are close matches for the classic knobs used on Fairchild compressors like the 660 / 670. Each pointer features a V-shaped painted inlay indicator. Fits ¼” (6.35mm) pot shafts.

• Grip Diameter: 0.559 in.
• Skirt Diameter: 0.746 in.
• Length: 1.177 in.
• Height: 0.550 in.

Large knob with line indicator and set screw similar in style to the Davies 1500 and 1510 knobs. Pairs well with P-K380X. Fits ¼” (6.35mm) pot shafts.

• Knob Height = 0.60"
• Pointer Diameter = 1.06"
• Fits 1/4" shaft with set screw
• Oversized Davies 1510 Clone

Small plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top and a stylish vertical knurl. The style is similar to the Boss middle knobs used on many pedals. Fits ¼” (6.35mm) pot shafts.

The P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.

Plastic control knob with set screw and brass insert. This skirted knob is similar in style to the knobs found on many Boss pedals. It features a fluted grip with a radial-brushed metal top. The indicator line extends from the top of the down down through the bottom of the skirt. Fits ¼” (6.35mm) pot shafts.
See P-K370X for a skirted version.

Small plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top, a fine straight-knurl grip, and a vertical pointer. Fits ¼” (6.35mm) pot shafts.

This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.

Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.

Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.685 inches. Fits ¼” (6.35mm) pot shafts. Note: Pair with R-VADAPT-125 to fit 0.125” potentiometer shafts. For a skirted version see P-K397-X. See P-K696 for the dual concentric knob lower.

Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line and a clear plastic skirt. The skirt diameter is 1 inch. Fits ¼” (6.35mm) pot shafts. For a non-skirted version see P-K398-X.

Plastic knobs with a set screw and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.495 inches. Fits ¼” (6.35mm) pot shafts.

Large vintage style skirted pointer knob. This knob is styled after the RCA “fester” knobs found on countless vintage electronics. The knobs feature a hex set screw, and fit ¼" solid shaft potentiometers.

Small plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K411-X.

Medium sized plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. This style of knob can be found on some versions of the ProCo Rat. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K410-X.

Solid aluminum control knob with set screw. This knob has a pinched grip and is similar in size and appearance to the Davies 1510 but with sharper angles for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.

• Height: 0.575 in. (14.61 mm)
• Diameter: 0.75 in. (19.05 mm)
• Fits ¼" shaft with set screw

Painted phenolic knobs with a set screw and brass insert. These unique knobs closely match the colorful RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. These classic knobs are painted to match the style of the original painted RCA knobs. The paint is a durable chip-resistant coating. The RCA style knobs feature an inlay indicator line. Fits ¼” (6.35mm) pot shafts.

• Height: 0.792 in. (20.1 mm)
• Diameter: 1.293 in. (33 mm)
• Fits ¼" shaft with set screw

Anodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

Small plastic control knob with set screw and metal insert. This knob has a pinched grip similar to the Davies 1510 but features a smaller diameter and scooped cutout for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.